view hgext/gpg.py @ 36367:043e77f3be09

sshpeer: return framed file object when needed

Currently, wireproto.wirepeer has a default implementation of
_submitbatch() and sshv1peer has a very similar implementation.
The main difference is that sshv1peer is aware of the total amount
of bytes it can read whereas the default implementation reads the
stream until no more data is returned. The default implementation
works for HTTP, since there is a known end to HTTP responses (either
Content-Length or 0 sized chunk).

This commit teaches sshv1peer to use our just-introduced "cappedreader"
class for wrapping a file object to limit the number of bytes that
can be read. We do this by introducing an argument to specify whether
the response is framed. If set, we returned a cappedreader instance
instead of the raw pipe.

_call() always has framed responses. So we set this argument
unconditionally and then .read() the entirety of the result.
Strictly speaking, we don't need to use cappedreader in this case
and can inline frame decoding/read logic. But I like when things
are consistent. The overhead should be negligible.

_callstream() and _callcompressable() are special: whether framing
is used depends on the specific command. So, we define a set
of commands that have framed response. It currently only
contains "batch."

As a result of this change, the one-off implementation of
_submitbatch() in sshv1peer can be removed since it is now
safe to .read() the response's file object until end of stream.
cappedreader takes care of not overrunning the frame.

Differential Revision: https://phab.mercurial-scm.org/D2380

# Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os
import tempfile

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    error,
    match,
    node as hgnode,
    pycompat,
    registrar,
    util,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem('gpg', 'cmd',
    default='gpg',
)
configitem('gpg', 'key',
    default=None,
)
configitem('gpg', '.*',
    default=None,
    generic=True,
)

class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and " --local-user \"%s\"" % key) or ""

    def sign(self, data):
        gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
        return util.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
            fp = os.fdopen(fd, pycompat.sysstr('wb'))
            fp.write(sig)
            fp.close()
            fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
            fp = os.fdopen(fd, pycompat.sysstr('wb'))
            fp.write(data)
            fp.close()
            gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                      "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
            ret = util.filter("", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith("[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith("VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith("ERRSIG"):
                key = l.split(" ", 3)[:2]
                key.append("")
                fingerprint = None
            elif (l.startswith("GOODSIG") or
                  l.startswith("EXPSIG") or
                  l.startswith("EXPKEYSIG") or
                  l.startswith("BADSIG")):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys

def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config("gpg", "cmd")
    gpgkey = opts.get(r'key')
    if not gpgkey:
        gpgkey = ui.config("gpg", "key")
    return gpg(gpgpath, gpgkey)

def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """
    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(".hgsigs")
    for r in reversed(fl.heads()):
        fn = ".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = "localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass

def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = "%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == "ERRSIG":
            ui.write(_("%s Unknown key ID \"%s\"\n") % (prefix, key[1]))
            continue
        if key[0] == "BADSIG":
            ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == "EXPSIG":
            ui.write(_("%s Note: Signature has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        elif key[0] == "EXPKEYSIG":
            ui.write(_("%s Note: This key has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        validkeys.append((key[1], key[2], key[3]))
    return validkeys

@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write("%-30s %s\n" % (keystr(ui, k), r))

@command("sigcheck", [], _('hg sigcheck REV'))
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_("%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(" %s\n" % keystr(ui, key))

def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config("gpg", fingerprint)
    if comment:
        return "%s (%s)" % (user, comment)
    else:
        return user

@command("sign",
         [('l', 'local', None, _('make the signature local')),
          ('f', 'force', None, _('sign even if the sigfile is modified')),
          ('', 'no-commit', None, _('do not commit the sigfile after signing')),
          ('k', 'key', '',
           _('the key id to sign with'), _('ID')),
          ('m', 'message', '',
           _('use text as commit message'), _('TEXT')),
          ('e', 'edit', False, _('invoke editor on commit messages')),
         ] + cmdutil.commitopts2,
         _('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)

def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    opts = pycompat.byteskwargs(opts)
    sigver = "0"
    sigmessage = ""

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [node for node in repo.dirstate.parents()
                 if node != hgnode.nullid]
        if len(nodes) > 1:
            raise error.Abort(_('uncommitted merge - please provide a '
                               'specific revision'))
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
                                         hgnode.short(n)))
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_("error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace("\n", "")
        sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts['local']:
        repo.vfs.append("localsigs", sigmessage)
        return

    if not opts["force"]:
        msigs = match.exact(repo.root, '', ['.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(_("working copy of .hgsigs is changed "),
                             hint=_("please commit .hgsigs manually"))

    sigsfile = repo.wvfs(".hgsigs", "ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if '.hgsigs' not in repo.dirstate:
        repo[None].add([".hgsigs"])

    if opts["no_commit"]:
        return

    message = opts['message']
    if not message:
        # we don't translate commit messages
        message = "\n".join(["Added signature for changeset %s"
                             % hgnode.short(n)
                             for n in nodes])
    try:
        editor = cmdutil.getcommiteditor(editform='gpg.sign',
                                         **pycompat.strkwargs(opts))
        repo.commit(message, opts['user'], opts['date'], match=msigs,
                    editor=editor)
    except ValueError as inst:
        raise error.Abort(str(inst))

def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == "0":
        return "%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_("unknown signature version"))