view tests/test-convert-svn-move.t @ 36367:043e77f3be09

sshpeer: return framed file object when needed

Currently, wireproto.wirepeer has a default implementation of
_submitbatch() and sshv1peer has a very similar implementation.
The main difference is that sshv1peer is aware of the total amount
of bytes it can read whereas the default implementation reads the
stream until no more data is returned. The default implementation
works for HTTP, since there is a known end to HTTP responses (either
Content-Length or 0 sized chunk).

This commit teaches sshv1peer to use our just-introduced "cappedreader"
class for wrapping a file object to limit the number of bytes that
can be read. We do this by introducing an argument to specify whether
the response is framed. If set, we returned a cappedreader instance
instead of the raw pipe.

_call() always has framed responses. So we set this argument
unconditionally and then .read() the entirety of the result.
Strictly speaking, we don't need to use cappedreader in this case
and can inline frame decoding/read logic. But I like when things
are consistent. The overhead should be negligible.

_callstream() and _callcompressable() are special: whether framing
is used depends on the specific command. So, we define a set
of commands that have framed response. It currently only
contains "batch."

As a result of this change, the one-off implementation of
_submitbatch() in sshv1peer can be removed since it is now
safe to .read() the response's file object until end of stream.
cappedreader takes care of not overrunning the frame.

Differential Revision: https://phab.mercurial-scm.org/D2380

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif

Convert trunk and branches

  $ hg convert --datesort "$SVNREPOURL"/subproject A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  13 createtrunk
  12 moved1
  11 moved1
  10 moved2
  9 changeb and rm d2
  8 changeb and rm d2
  7 moved1again
  6 moved1again
  5 copyfilefrompast
  4 copydirfrompast
  3 add d3
  2 copy dir and remove subdir
  1 add d4old
  0 rename d4old into d4new

  $ cd A-hg
  $ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
  o  13 rename d4old into d4new files: d4new/g d4old/g
  |
  o  12 add d4old files: d4old/g
  |
  o  11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
  |
  o  10 add d3 files: d3/d31/e d3/f
  |
  o  9 copydirfrompast files: d2/d
  |
  o  8 copyfilefrompast files: d
  |
  o  7 moved1again files: d1/b d1/c
  |
  | o  6 moved1again files:
  | |
  o |  5 changeb and rm d2 files: d1/b d2/d
  | |
  | o  4 changeb and rm d2 files: b
  | |
  o |  3 moved2 files: d2/d
  | |
  o |  2 moved1 files: d1/b d1/c
  | |
  | o  1 moved1 files: b c
  |
  o  0 createtrunk files:
  

Check move copy records

  $ hg st --rev 12:13 --copies
  A d4new/g
    d4old/g
  R d4old/g

Check branches

  $ hg branches
  default                       13:* (glob)
  d1                             6:* (glob)
  $ cd ..

  $ mkdir test-replace
  $ cd test-replace
  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"

Convert files being replaced by directories

  $ hg convert svn-repo hg-repo
  initializing destination hg-repo repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd hg-repo

Manifest before

  $ hg -v manifest -r 1
  644   a
  644   d/b
  644   d2/a
  644 @ dlink
  644 @ dlink2
  644   dlink3

Manifest after clobber1

  $ hg -v manifest -r 2
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644   dlink3

Manifest after clobber2

  $ hg -v manifest -r 3
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Manifest after clobberdir

  $ hg -v manifest -r 6
  644   a/b
  644   d/b
  644   d2/a
  644   d2/c
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Try updating

  $ hg up -qC default
  $ cd ..

Test convert progress bar

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > assume-tty = 1
  > delay = 0
  > changedelay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg convert svn-repo hg-progress
  \r (no-eol) (esc)
  scanning [=====>                                      ] 1/7\r (no-eol) (esc)
  scanning [===========>                                ] 2/7\r (no-eol) (esc)
  scanning [=================>                          ] 3/7\r (no-eol) (esc)
  scanning [========================>                   ] 4/7\r (no-eol) (esc)
  scanning [==============================>             ] 5/7\r (no-eol) (esc)
  scanning [====================================>       ] 6/7\r (no-eol) (esc)
  scanning [===========================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/7\r (no-eol) (esc)
  getting files [=====>                                 ] 1/6\r (no-eol) (esc)
  getting files [============>                          ] 2/6\r (no-eol) (esc)
  getting files [==================>                    ] 3/6\r (no-eol) (esc)
  getting files [=========================>             ] 4/6\r (no-eol) (esc)
  getting files [===============================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=====>                                    ] 1/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========>                              ] 2/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/2\r (no-eol) (esc)
  scanning paths [==================>                   ] 1/2\r (no-eol) (esc)
  getting files [========>                              ] 1/4\r (no-eol) (esc)
  getting files [==================>                    ] 2/4\r (no-eol) (esc)
  getting files [============================>          ] 3/4\r (no-eol) (esc)
  getting files [======================================>] 4/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 3/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=======================>                  ] 4/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============================>            ] 5/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===================================>      ] 6/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/3\r (no-eol) (esc)
  scanning paths [===========>                          ] 1/3\r (no-eol) (esc)
  scanning paths [========================>             ] 2/3\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination hg-progress repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd ..