view tests/test-merge7.t @ 36367:043e77f3be09

sshpeer: return framed file object when needed

Currently, wireproto.wirepeer has a default implementation of
_submitbatch() and sshv1peer has a very similar implementation.
The main difference is that sshv1peer is aware of the total amount
of bytes it can read whereas the default implementation reads the
stream until no more data is returned. The default implementation
works for HTTP, since there is a known end to HTTP responses (either
Content-Length or 0 sized chunk).

This commit teaches sshv1peer to use our just-introduced "cappedreader"
class for wrapping a file object to limit the number of bytes that
can be read. We do this by introducing an argument to specify whether
the response is framed. If set, we returned a cappedreader instance
instead of the raw pipe.

_call() always has framed responses. So we set this argument
unconditionally and then .read() the entirety of the result.
Strictly speaking, we don't need to use cappedreader in this case
and can inline frame decoding/read logic. But I like when things
are consistent. The overhead should be negligible.

_callstream() and _callcompressable() are special: whether framing
is used depends on the specific command. So, we define a set
of commands that have framed response. It currently only
contains "batch."

As a result of this change, the one-off implementation of
_submitbatch() in sshv1peer can be removed since it is now
safe to .read() the response's file object until end of stream.
cappedreader takes care of not overrunning the frame.

Differential Revision: https://phab.mercurial-scm.org/D2380

initial
  $ hg init test-a
  $ cd test-a
  $ cat >test.txt <<"EOF"
  > 1
  > 2
  > 3
  > EOF
  $ hg add test.txt
  $ hg commit -m "Initial"

clone
  $ cd ..
  $ hg clone test-a test-b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

change test-a
  $ cd test-a
  $ cat >test.txt <<"EOF"
  > one
  > two
  > three
  > EOF
  $ hg commit -m "Numbers as words"

change test-b
  $ cd ../test-b
  $ cat >test.txt <<"EOF"
  > 1
  > 2.5
  > 3
  > EOF
  $ hg commit -m "2 -> 2.5"

now pull and merge from test-a
  $ hg pull ../test-a
  pulling from ../test-a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 96b70246a118
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg merge
  merging test.txt
  warning: conflicts while merging test.txt! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
resolve conflict
  $ cat >test.txt <<"EOF"
  > one
  > two-point-five
  > three
  > EOF
  $ rm -f *.orig
  $ hg resolve -m test.txt
  (no more unresolved files)
  $ hg commit -m "Merge 1"

change test-a again
  $ cd ../test-a
  $ cat >test.txt <<"EOF"
  > one
  > two-point-one
  > three
  > EOF
  $ hg commit -m "two -> two-point-one"

pull and merge from test-a again
  $ cd ../test-b
  $ hg pull ../test-a
  pulling from ../test-a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 40d11a4173a8
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg merge --debug
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 96b70246a118, local: 50c3a7e29886+, remote: 40d11a4173a8
   preserving test.txt for resolve of test.txt
  starting 4 threads for background file closing (?)
   test.txt: versions differ -> m (premerge)
  picked tool ':merge' for test.txt (binary False symlink False changedelete False)
  merging test.txt
  my test.txt@50c3a7e29886+ other test.txt@40d11a4173a8 ancestor test.txt@96b70246a118
   test.txt: versions differ -> m (merge)
  picked tool ':merge' for test.txt (binary False symlink False changedelete False)
  my test.txt@50c3a7e29886+ other test.txt@40d11a4173a8 ancestor test.txt@96b70246a118
  warning: conflicts while merging test.txt! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat test.txt
  one
  <<<<<<< working copy: 50c3a7e29886 - test: Merge 1
  two-point-five
  =======
  two-point-one
  >>>>>>> merge rev:    40d11a4173a8 - test: two -> two-point-one
  three

  $ hg debugindex test.txt
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 01365c4cca56 000000000000 000000000000 (re)
       1         7       9  .....       1 7b013192566a 01365c4cca56 000000000000 (re)
       2        16      15  .....       2 8fe46a3eb557 01365c4cca56 000000000000 (re)
       3        31      2.  .....       3 fc3148072371 7b013192566a 8fe46a3eb557 (re)
       4        5.      25  .....       4 d40249267ae3 8fe46a3eb557 000000000000 (re)

  $ hg log
  changeset:   4:40d11a4173a8
  tag:         tip
  parent:      2:96b70246a118
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     two -> two-point-one
  
  changeset:   3:50c3a7e29886
  parent:      1:d1e159716d41
  parent:      2:96b70246a118
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Merge 1
  
  changeset:   2:96b70246a118
  parent:      0:b1832b9d912a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Numbers as words
  
  changeset:   1:d1e159716d41
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2 -> 2.5
  
  changeset:   0:b1832b9d912a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Initial
  

  $ cd ..