view tests/test-rename.t @ 36367:043e77f3be09

sshpeer: return framed file object when needed

Currently, wireproto.wirepeer has a default implementation of
_submitbatch() and sshv1peer has a very similar implementation.
The main difference is that sshv1peer is aware of the total amount
of bytes it can read whereas the default implementation reads the
stream until no more data is returned. The default implementation
works for HTTP, since there is a known end to HTTP responses (either
Content-Length or 0 sized chunk).

This commit teaches sshv1peer to use our just-introduced "cappedreader"
class for wrapping a file object to limit the number of bytes that
can be read. We do this by introducing an argument to specify whether
the response is framed. If set, we returned a cappedreader instance
instead of the raw pipe.

_call() always has framed responses. So we set this argument
unconditionally and then .read() the entirety of the result.
Strictly speaking, we don't need to use cappedreader in this case
and can inline frame decoding/read logic. But I like when things
are consistent. The overhead should be negligible.

_callstream() and _callcompressable() are special: whether framing
is used depends on the specific command. So, we define a set
of commands that have framed response. It currently only
contains "batch."

As a result of this change, the one-off implementation of
_submitbatch() in sshv1peer can be removed since it is now
safe to .read() the response's file object until end of stream.
cappedreader takes care of not overrunning the frame.

Differential Revision: https://phab.mercurial-scm.org/D2380

  $ hg init
  $ mkdir d1 d1/d11 d2
  $ echo d1/a > d1/a
  $ echo d1/ba > d1/ba
  $ echo d1/a1 > d1/d11/a1
  $ echo d1/b > d1/b
  $ echo d2/b > d2/b
  $ hg add d1/a d1/b d1/ba d1/d11/a1 d2/b
  $ hg commit -m "1"

rename a single file

  $ hg rename d1/d11/a1 d2/c
  $ hg --config ui.portablefilenames=abort rename d1/a d1/con.xml
  abort: filename contains 'con', which is reserved on Windows: d1/con.xml
  [255]
  $ hg sum
  parent: 0:9b4b6e7b2c26 tip
   1
  branch: default
  commit: 1 renamed
  update: (current)
  phases: 1 draft
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename a single file using absolute paths

  $ hg rename `pwd`/d1/d11/a1 `pwd`/d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file

  $ mv d1/d11/a1 d2/c
  $ hg rename --after d1/d11/a1 d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file when src and tgt already tracked

  $ mv d1/d11/a1 d2/c
  $ hg addrem -s 0
  removing d1/d11/a1
  adding d2/c
  $ hg rename --after d1/d11/a1 d2/c
  $ hg status -C
  A d2/c
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/c

rename --after a single file to a nonexistent target filename

  $ hg rename --after d1/a dummy
  d1/a: not recording move - dummy does not exist

move a single file to an existing directory

  $ hg rename d1/d11/a1 d2
  $ hg status -C
  A d2/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a1

move --after a single file to an existing directory

  $ mv d1/d11/a1 d2
  $ hg rename --after d1/d11/a1 d2
  $ hg status -C
  A d2/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a1

rename a file using a relative path

  $ (cd d1/d11; hg rename ../../d2/b e)
  $ hg status -C
  A d1/d11/e
    d2/b
  R d2/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/d11/e

rename --after a file using a relative path

  $ (cd d1/d11; mv ../../d2/b e; hg rename --after ../../d2/b e)
  $ hg status -C
  A d1/d11/e
    d2/b
  R d2/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/d11/e

rename directory d1 as d3

  $ hg rename d1/ d3
  moving d1/a to d3/a
  moving d1/b to d3/b
  moving d1/ba to d3/ba
  moving d1/d11/a1 to d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

rename --after directory d1 as d3

  $ mv d1 d3
  $ hg rename --after d1 d3
  moving d1/a to d3/a
  moving d1/b to d3/b
  moving d1/ba to d3/ba
  moving d1/d11/a1 to d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a directory using a relative path

  $ (cd d2; mkdir d3; hg rename ../d1/d11 d3)
  moving ../d1/d11/a1 to d3/d11/a1
  $ hg status -C
  A d2/d3/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d3

move --after a directory using a relative path

  $ (cd d2; mkdir d3; mv ../d1/d11 d3; hg rename --after ../d1/d11 d3)
  moving ../d1/d11/a1 to d3/d11/a1
  $ hg status -C
  A d2/d3/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d3

move directory d1/d11 to an existing directory d2 (removes empty d1)

  $ hg rename d1/d11/ d2
  moving d1/d11/a1 to d2/d11/a1
  $ hg status -C
  A d2/d11/a1
    d1/d11/a1
  R d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d11

move directories d1 and d2 to a new directory d3

  $ mkdir d3
  $ hg rename d1 d2 d3
  moving d1/a to d3/d1/a
  moving d1/b to d3/d1/b
  moving d1/ba to d3/d1/ba
  moving d1/d11/a1 to d3/d1/d11/a1
  moving d2/b to d3/d2/b
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  A d3/d2/b
    d2/b
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  R d2/b
  $ hg update -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move --after directories d1 and d2 to a new directory d3

  $ mkdir d3
  $ mv d1 d2 d3
  $ hg rename --after d1 d2 d3
  moving d1/a to d3/d1/a
  moving d1/b to d3/d1/b
  moving d1/ba to d3/d1/ba
  moving d1/d11/a1 to d3/d1/d11/a1
  moving d2/b to d3/d2/b
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  A d3/d2/b
    d2/b
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  R d2/b
  $ hg update -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move everything under directory d1 to existing directory d2, do not
overwrite existing files (d2/b)

  $ hg rename d1/* d2
  d2/b: not overwriting - file already committed
  (hg rename --force to replace the file by recording a rename)
  moving d1/d11/a1 to d2/d11/a1
  $ hg status -C
  A d2/a
    d1/a
  A d2/ba
    d1/ba
  A d2/d11/a1
    d1/d11/a1
  R d1/a
  R d1/ba
  R d1/d11/a1
  $ diff -u d1/b d2/b
  --- d1/b	* (glob)
  +++ d2/b	* (glob)
  @@ * (glob)
  -d1/b
  +d2/b
  [1]
  $ hg update -C
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d2/a d2/ba d2/d11/a1

attempt to move one file into a non-existent directory

  $ hg rename d1/a dx/
  abort: destination dx/ is not a directory
  [255]
  $ hg status -C
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

attempt to move potentially more than one file into a non-existent directory

  $ hg rename 'glob:d1/**' dx
  abort: with multiple sources, destination must be an existing directory
  [255]

move every file under d1 to d2/d21

  $ mkdir d2/d21
  $ hg rename 'glob:d1/**' d2/d21
  moving d1/a to d2/d21/a
  moving d1/b to d2/d21/b
  moving d1/ba to d2/d21/ba
  moving d1/d11/a1 to d2/d21/a1
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  A d2/d21/b
    d1/b
  A d2/d21/ba
    d1/ba
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

move --after some files under d1 to d2/d21

  $ mkdir d2/d21
  $ mv d1/a d1/d11/a1 d2/d21
  $ hg rename --after 'glob:d1/**' d2/d21
  moving d1/a to d2/d21/a
  d1/b: not recording move - d2/d21/b does not exist
  d1/ba: not recording move - d2/d21/ba does not exist
  moving d1/d11/a1 to d2/d21/a1
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  R d1/a
  R d1/d11/a1
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

move every file under d1 starting with an 'a' to d2/d21 (regexp)

  $ mkdir d2/d21
  $ hg rename 're:d1/([^a][^/]*/)*a.*' d2/d21
  moving d1/a to d2/d21/a
  moving d1/d11/a1 to d2/d21/a1
  $ hg status -C
  A d2/d21/a
    d1/a
  A d2/d21/a1
    d1/d11/a1
  R d1/a
  R d1/d11/a1
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d2/d21

attempt to overwrite an existing file

  $ echo "ca" > d1/ca
  $ hg rename d1/ba d1/ca
  d1/ca: not overwriting - file exists
  (hg rename --after to record the rename)
  $ hg status -C
  ? d1/ca
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

forced overwrite of an existing file

  $ echo "ca" > d1/ca
  $ hg rename --force d1/ba d1/ca
  $ hg status -C
  A d1/ca
    d1/ba
  R d1/ba
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca

attempt to overwrite an existing broken symlink

#if symlink
  $ ln -s ba d1/ca
  $ hg rename --traceback d1/ba d1/ca
  d1/ca: not overwriting - file exists
  (hg rename --after to record the rename)
  $ hg status -C
  ? d1/ca
  $ hg update -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca

replace a symlink with a file

  $ ln -s ba d1/ca
  $ hg rename --force d1/ba d1/ca
  $ hg status -C
  A d1/ca
    d1/ba
  R d1/ba
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/ca
#endif

do not copy more than one source file to the same destination file

  $ mkdir d3
  $ hg rename d1/* d2/* d3
  moving d1/d11/a1 to d3/d11/a1
  d3/b: not overwriting - d2/b collides with d1/b
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a whole subtree with "hg rename ."

  $ mkdir d3
  $ (cd d1; hg rename . ../d3)
  moving a to ../d3/d1/a
  moving b to ../d3/d1/b
  moving ba to ../d3/d1/ba
  moving d11/a1 to ../d3/d1/d11/a1
  $ hg status -C
  A d3/d1/a
    d1/a
  A d3/d1/b
    d1/b
  A d3/d1/ba
    d1/ba
  A d3/d1/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move a whole subtree with "hg rename --after ."

  $ mkdir d3
  $ mv d1/* d3
  $ (cd d1; hg rename --after . ../d3)
  moving a to ../d3/a
  moving b to ../d3/b
  moving ba to ../d3/ba
  moving d11/a1 to ../d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

move the parent tree with "hg rename .."

  $ (cd d1/d11; hg rename .. ../../d3)
  moving ../a to ../../d3/a
  moving ../b to ../../d3/b
  moving ../ba to ../../d3/ba
  moving a1 to ../../d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/b
    d1/b
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

skip removed files

  $ hg remove d1/b
  $ hg rename d1 d3
  moving d1/a to d3/a
  moving d1/ba to d3/ba
  moving d1/d11/a1 to d3/d11/a1
  $ hg status -C
  A d3/a
    d1/a
  A d3/ba
    d1/ba
  A d3/d11/a1
    d1/d11/a1
  R d1/a
  R d1/b
  R d1/ba
  R d1/d11/a1
  $ hg update -C
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm -rf d3

transitive rename

  $ hg rename d1/b d1/bb
  $ hg rename d1/bb d1/bc
  $ hg status -C
  A d1/bc
    d1/b
  R d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/bc

transitive rename --after

  $ hg rename d1/b d1/bb
  $ mv d1/bb d1/bc
  $ hg rename --after d1/bb d1/bc
  $ hg status -C
  A d1/bc
    d1/b
  R d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/bc

  $ echo "# idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)"
  # idempotent renames (d1/b -> d1/bb followed by d1/bb -> d1/b)
  $ hg rename d1/b d1/bb
  $ echo "some stuff added to d1/bb" >> d1/bb
  $ hg rename d1/bb d1/b
  $ hg status -C
  M d1/b
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

overwriting with renames (issue1959)

  $ hg rename d1/a d1/c
  $ hg rename d1/b d1/a
  $ hg status -C
  M d1/a
    d1/b
  A d1/c
    d1/a
  R d1/b
  $ hg diff --git
  diff --git a/d1/a b/d1/a
  --- a/d1/a
  +++ b/d1/a
  @@ -1,1 +1,1 @@
  -d1/a
  +d1/b
  diff --git a/d1/b b/d1/b
  deleted file mode 100644
  --- a/d1/b
  +++ /dev/null
  @@ -1,1 +0,0 @@
  -d1/b
  diff --git a/d1/a b/d1/c
  copy from d1/a
  copy to d1/c
  $ hg update -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm d1/c # The file was marked as added, so 'hg update' action  was 'forget'

check illegal path components

  $ hg rename d1/d11/a1 .hg/foo
  abort: path contains illegal component: .hg/foo
  [255]
  $ hg status -C
  $ hg rename d1/d11/a1 ../foo
  abort: ../foo not under root '$TESTTMP'
  [255]
  $ hg status -C

  $ mv d1/d11/a1 .hg/foo
  $ hg rename --after d1/d11/a1 .hg/foo
  abort: path contains illegal component: .hg/foo
  [255]
  $ hg status -C
  ! d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm .hg/foo

  $ hg rename d1/d11/a1 .hg
  abort: path contains illegal component: .hg/a1
  [255]
  $ hg --config extensions.largefiles= rename d1/d11/a1 .hg
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  abort: path contains illegal component: .hg/a1
  [255]
  $ hg status -C
  $ hg rename d1/d11/a1 ..
  abort: ../a1 not under root '$TESTTMP'
  [255]
  $ hg --config extensions.largefiles= rename d1/d11/a1 ..
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  abort: ../a1 not under root '$TESTTMP'
  [255]
  $ hg status -C

  $ mv d1/d11/a1 .hg
  $ hg rename --after d1/d11/a1 .hg
  abort: path contains illegal component: .hg/a1
  [255]
  $ hg status -C
  ! d1/d11/a1
  $ hg update -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm .hg/a1

  $ (cd d1/d11; hg rename ../../d2/b ../../.hg/foo)
  abort: path contains illegal component: .hg/foo
  [255]
  $ hg status -C
  $ (cd d1/d11; hg rename ../../d2/b ../../../foo)
  abort: ../../../foo not under root '$TESTTMP'
  [255]
  $ hg status -C