Mercurial > hg
view mercurial/hbisect.py @ 17774:0496d4f73cf4
obsolete: cheap detection of nullid as successors
Nullid as successors create multiple issues:
- Nullid revnum is -1, confusing algorithm that use revnum unless you add
special handling in all of them.
- Nullid confuses "divergent" changeset detection and resolution. As you can't
add any successors to Nullid without being in even more troubles
Fortunately, there is no good reason to use nullid as a successor. The only
sensible meaning of "succeed by nullid" is "dropped" and this meaning is already
covered by obsolescence marker with empty successors set.
However, letting some nullid successors to slip in may cause terrible damage in
such algorithm difficult to debug. So I prefer to perform and clear detection of
of such pathological changeset. We could be much smarter by cleaning up nullid
successors on the fly but it would be much for expensive. As core Mercurial does
not create any such changeset, I think it is fine to just abort when suspicious
situation is detected.
Earlier experimental version created such changesets, so there are some out
there. The evolve extension added the necessary logic to clean up its mess.
author | Pierre-Yves David <pierre-yves.david@logilab.fr> |
---|---|
date | Mon, 15 Oct 2012 00:12:06 +0200 |
parents | 31f32a96e1e3 |
children | 93293813d753 |
line wrap: on
line source
# changelog bisection for mercurial # # Copyright 2007 Matt Mackall # Copyright 2005, 2006 Benoit Boissinot <benoit.boissinot@ens-lyon.org> # # Inspired by git bisect, extension skeleton taken from mq.py. # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. import os, error from i18n import _ from node import short, hex import util def bisect(changelog, state): """find the next node (if any) for testing during a bisect search. returns a (nodes, number, good) tuple. 'nodes' is the final result of the bisect if 'number' is 0. Otherwise 'number' indicates the remaining possible candidates for the search and 'nodes' contains the next bisect target. 'good' is True if bisect is searching for a first good changeset, False if searching for a first bad one. """ clparents = changelog.parentrevs skip = set([changelog.rev(n) for n in state['skip']]) def buildancestors(bad, good): # only the earliest bad revision matters badrev = min([changelog.rev(n) for n in bad]) goodrevs = [changelog.rev(n) for n in good] goodrev = min(goodrevs) # build visit array ancestors = [None] * (len(changelog) + 1) # an extra for [-1] # set nodes descended from goodrevs for rev in goodrevs: ancestors[rev] = [] for rev in xrange(goodrev + 1, len(changelog)): for prev in clparents(rev): if ancestors[prev] == []: ancestors[rev] = [] # clear good revs from array for rev in goodrevs: ancestors[rev] = None for rev in xrange(len(changelog), goodrev, -1): if ancestors[rev] is None: for prev in clparents(rev): ancestors[prev] = None if ancestors[badrev] is None: return badrev, None return badrev, ancestors good = False badrev, ancestors = buildancestors(state['bad'], state['good']) if not ancestors: # looking for bad to good transition? good = True badrev, ancestors = buildancestors(state['good'], state['bad']) bad = changelog.node(badrev) if not ancestors: # now we're confused if len(state['bad']) == 1 and len(state['good']) == 1: raise util.Abort(_("starting revisions are not directly related")) raise util.Abort(_("inconsistent state, %s:%s is good and bad") % (badrev, short(bad))) # build children dict children = {} visit = util.deque([badrev]) candidates = [] while visit: rev = visit.popleft() if ancestors[rev] == []: candidates.append(rev) for prev in clparents(rev): if prev != -1: if prev in children: children[prev].append(rev) else: children[prev] = [rev] visit.append(prev) candidates.sort() # have we narrowed it down to one entry? # or have all other possible candidates besides 'bad' have been skipped? tot = len(candidates) unskipped = [c for c in candidates if (c not in skip) and (c != badrev)] if tot == 1 or not unskipped: return ([changelog.node(rev) for rev in candidates], 0, good) perfect = tot // 2 # find the best node to test best_rev = None best_len = -1 poison = set() for rev in candidates: if rev in poison: # poison children poison.update(children.get(rev, [])) continue a = ancestors[rev] or [rev] ancestors[rev] = None x = len(a) # number of ancestors y = tot - x # number of non-ancestors value = min(x, y) # how good is this test? if value > best_len and rev not in skip: best_len = value best_rev = rev if value == perfect: # found a perfect candidate? quit early break if y < perfect and rev not in skip: # all downhill from here? # poison children poison.update(children.get(rev, [])) continue for c in children.get(rev, []): if ancestors[c]: ancestors[c] = list(set(ancestors[c] + a)) else: ancestors[c] = a + [c] assert best_rev is not None best_node = changelog.node(best_rev) return ([best_node], tot, good) def load_state(repo): state = {'current': [], 'good': [], 'bad': [], 'skip': []} if os.path.exists(repo.join("bisect.state")): for l in repo.opener("bisect.state"): kind, node = l[:-1].split() node = repo.lookup(node) if kind not in state: raise util.Abort(_("unknown bisect kind %s") % kind) state[kind].append(node) return state def save_state(repo, state): f = repo.opener("bisect.state", "w", atomictemp=True) wlock = repo.wlock() try: for kind in state: for node in state[kind]: f.write("%s %s\n" % (kind, hex(node))) f.close() finally: wlock.release() def get(repo, status): """ Return a list of revision(s) that match the given status: - ``good``, ``bad``, ``skip``: csets explicitly marked as good/bad/skip - ``goods``, ``bads`` : csets topologically good/bad - ``range`` : csets taking part in the bisection - ``pruned`` : csets that are goods, bads or skipped - ``untested`` : csets whose fate is yet unknown - ``ignored`` : csets ignored due to DAG topology - ``current`` : the cset currently being bisected """ state = load_state(repo) if status in ('good', 'bad', 'skip', 'current'): return map(repo.changelog.rev, state[status]) else: # In the following sets, we do *not* call 'bisect()' with more # than one level of recursion, because that can be very, very # time consuming. Instead, we always develop the expression as # much as possible. # 'range' is all csets that make the bisection: # - have a good ancestor and a bad descendant, or conversely # that's because the bisection can go either way range = '( bisect(bad)::bisect(good) | bisect(good)::bisect(bad) )' _t = repo.revs('bisect(good)::bisect(bad)') # The sets of topologically good or bad csets if len(_t) == 0: # Goods are topologically after bads goods = 'bisect(good)::' # Pruned good csets bads = '::bisect(bad)' # Pruned bad csets else: # Goods are topologically before bads goods = '::bisect(good)' # Pruned good csets bads = 'bisect(bad)::' # Pruned bad csets # 'pruned' is all csets whose fate is already known: good, bad, skip skips = 'bisect(skip)' # Pruned skipped csets pruned = '( (%s) | (%s) | (%s) )' % (goods, bads, skips) # 'untested' is all cset that are- in 'range', but not in 'pruned' untested = '( (%s) - (%s) )' % (range, pruned) # 'ignored' is all csets that were not used during the bisection # due to DAG topology, but may however have had an impact. # E.g., a branch merged between bads and goods, but whose branch- # point is out-side of the range. iba = '::bisect(bad) - ::bisect(good)' # Ignored bads' ancestors iga = '::bisect(good) - ::bisect(bad)' # Ignored goods' ancestors ignored = '( ( (%s) | (%s) ) - (%s) )' % (iba, iga, range) if status == 'range': return repo.revs(range) elif status == 'pruned': return repo.revs(pruned) elif status == 'untested': return repo.revs(untested) elif status == 'ignored': return repo.revs(ignored) elif status == "goods": return repo.revs(goods) elif status == "bads": return repo.revs(bads) else: raise error.ParseError(_('invalid bisect state')) def label(repo, node): rev = repo.changelog.rev(node) # Try explicit sets if rev in get(repo, 'good'): # i18n: bisect changeset status return _('good') if rev in get(repo, 'bad'): # i18n: bisect changeset status return _('bad') if rev in get(repo, 'skip'): # i18n: bisect changeset status return _('skipped') if rev in get(repo, 'untested') or rev in get(repo, 'current'): # i18n: bisect changeset status return _('untested') if rev in get(repo, 'ignored'): # i18n: bisect changeset status return _('ignored') # Try implicit sets if rev in get(repo, 'goods'): # i18n: bisect changeset status return _('good (implicit)') if rev in get(repo, 'bads'): # i18n: bisect changeset status return _('bad (implicit)') return None def shortlabel(label): if label: return label[0].upper() return None