view tests/badserverext.py @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

# badserverext.py - Extension making servers behave badly
#
# Copyright 2017 Gregory Szorc <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

# no-check-code

"""Extension to make servers behave badly.

This extension is useful for testing Mercurial behavior when various network
events occur.

Various config options in the [badserver] section influence behavior:

closebeforeaccept
   If true, close() the server socket when a new connection arrives before
   accept() is called. The server will then exit.

closeafteraccept
   If true, the server will close() the client socket immediately after
   accept().

closeafterrecvbytes
   If defined, close the client socket after receiving this many bytes.

closeaftersendbytes
   If defined, close the client socket after sending this many bytes.
"""

from __future__ import absolute_import

import socket

from mercurial import(
    pycompat,
    registrar,
)

from mercurial.hgweb import (
    server,
)

configtable = {}
configitem = registrar.configitem(configtable)

configitem(b'badserver', b'closeafteraccept',
    default=False,
)
configitem(b'badserver', b'closeafterrecvbytes',
    default=b'0',
)
configitem(b'badserver', b'closeaftersendbytes',
    default=b'0',
)
configitem(b'badserver', b'closebeforeaccept',
    default=False,
)

# We can't adjust __class__ on a socket instance. So we define a proxy type.
class socketproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(self, obj, logfp, closeafterrecvbytes=0,
                 closeaftersendbytes=0):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('makefile', 'sendall', '_writelog'):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def _writelog(self, msg):
        msg = msg.replace(b'\r', b'\\r').replace(b'\n', b'\\n')

        object.__getattribute__(self, '_logfp').write(msg)
        object.__getattribute__(self, '_logfp').write(b'\n')
        object.__getattribute__(self, '_logfp').flush()

    def makefile(self, mode, bufsize):
        f = object.__getattribute__(self, '_orig').makefile(mode, bufsize)

        logfp = object.__getattribute__(self, '_logfp')
        closeafterrecvbytes = object.__getattribute__(self,
                                                      '_closeafterrecvbytes')
        closeaftersendbytes = object.__getattribute__(self,
                                                      '_closeaftersendbytes')

        return fileobjectproxy(f, logfp,
                               closeafterrecvbytes=closeafterrecvbytes,
                               closeaftersendbytes=closeaftersendbytes)

    def sendall(self, data, flags=0):
        remaining = object.__getattribute__(self, '_closeaftersendbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').sendall(data, flags)
            self._writelog(b'sendall(%d) -> %s' % (len(data), data))
            return result

        if len(data) > remaining:
            newdata = data[0:remaining]
        else:
            newdata = data

        remaining -= len(newdata)

        result = object.__getattribute__(self, '_orig').sendall(newdata, flags)

        self._writelog(b'sendall(%d from %d) -> (%d) %s' % (
            len(newdata), len(data), remaining, newdata))

        object.__setattr__(self, '_closeaftersendbytes', remaining)

        if remaining <= 0:
            self._writelog(b'write limit reached; closing socket')
            object.__getattribute__(self, '_orig').shutdown(socket.SHUT_RDWR)

            raise Exception('connection closed after sending N bytes')

        return result


# We can't adjust __class__ on socket._fileobject, so define a proxy.
class fileobjectproxy(object):
    __slots__ = (
        '_orig',
        '_logfp',
        '_closeafterrecvbytes',
        '_closeaftersendbytes',
    )

    def __init__(self, obj, logfp, closeafterrecvbytes=0,
                 closeaftersendbytes=0):
        object.__setattr__(self, '_orig', obj)
        object.__setattr__(self, '_logfp', logfp)
        object.__setattr__(self, '_closeafterrecvbytes', closeafterrecvbytes)
        object.__setattr__(self, '_closeaftersendbytes', closeaftersendbytes)

    def __getattribute__(self, name):
        if name in ('_close', 'read', 'readline', 'write', '_writelog'):
            return object.__getattribute__(self, name)

        return getattr(object.__getattribute__(self, '_orig'), name)

    def __delattr__(self, name):
        delattr(object.__getattribute__(self, '_orig'), name)

    def __setattr__(self, name, value):
        setattr(object.__getattribute__(self, '_orig'), name, value)

    def _writelog(self, msg):
        msg = msg.replace(b'\r', b'\\r').replace(b'\n', b'\\n')

        object.__getattribute__(self, '_logfp').write(msg)
        object.__getattribute__(self, '_logfp').write(b'\n')
        object.__getattribute__(self, '_logfp').flush()

    def _close(self):
        # Python 3 uses an io.BufferedIO instance. Python 2 uses some file
        # object wrapper.
        if pycompat.ispy3:
            orig = object.__getattribute__(self, '_orig')

            if hasattr(orig, 'raw'):
                orig.raw._sock.shutdown(socket.SHUT_RDWR)
            else:
                self.close()
        else:
            self._sock.shutdown(socket.SHUT_RDWR)

    def read(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').read(size)
            self._writelog(b'read(%d) -> (%d) (%s) %s' % (size,
                                                          len(result),
                                                          result))
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').read(size)
        remaining -= len(result)

        self._writelog(b'read(%d from %d) -> (%d) %s' % (
            size, origsize, len(result), result))

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog(b'read limit reached, closing socket')
            self._close()

            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def readline(self, size=-1):
        remaining = object.__getattribute__(self, '_closeafterrecvbytes')

        # No read limit. Call original function.
        if not remaining:
            result = object.__getattribute__(self, '_orig').readline(size)
            self._writelog(b'readline(%d) -> (%d) %s' % (
                size, len(result), result))
            return result

        origsize = size

        if size < 0:
            size = remaining
        else:
            size = min(remaining, size)

        result = object.__getattribute__(self, '_orig').readline(size)
        remaining -= len(result)

        self._writelog(b'readline(%d from %d) -> (%d) %s' % (
            size, origsize, len(result), result))

        object.__setattr__(self, '_closeafterrecvbytes', remaining)

        if remaining <= 0:
            self._writelog(b'read limit reached; closing socket')
            self._close()

            # This is the easiest way to abort the current request.
            raise Exception('connection closed after receiving N bytes')

        return result

    def write(self, data):
        remaining = object.__getattribute__(self, '_closeaftersendbytes')

        # No byte limit on this operation. Call original function.
        if not remaining:
            self._writelog(b'write(%d) -> %s' % (len(data), data))
            result = object.__getattribute__(self, '_orig').write(data)
            return result

        if len(data) > remaining:
            newdata = data[0:remaining]
        else:
            newdata = data

        remaining -= len(newdata)

        self._writelog(b'write(%d from %d) -> (%d) %s' % (
            len(newdata), len(data), remaining, newdata))

        result = object.__getattribute__(self, '_orig').write(newdata)

        object.__setattr__(self, '_closeaftersendbytes', remaining)

        if remaining <= 0:
            self._writelog(b'write limit reached; closing socket')
            self._close()

            raise Exception('connection closed after sending N bytes')

        return result

def extsetup(ui):
    # Change the base HTTP server class so various events can be performed.
    # See SocketServer.BaseServer for how the specially named methods work.
    class badserver(server.MercurialHTTPServer):
        def __init__(self, ui, *args, **kwargs):
            self._ui = ui
            super(badserver, self).__init__(ui, *args, **kwargs)

            recvbytes = self._ui.config(b'badserver', b'closeafterrecvbytes')
            recvbytes = recvbytes.split(b',')
            self.closeafterrecvbytes = [int(v) for v in recvbytes if v]
            sendbytes = self._ui.config(b'badserver', b'closeaftersendbytes')
            sendbytes = sendbytes.split(b',')
            self.closeaftersendbytes = [int(v) for v in sendbytes if v]

            # Need to inherit object so super() works.
            class badrequesthandler(self.RequestHandlerClass, object):
                def send_header(self, name, value):
                    # Make headers deterministic to facilitate testing.
                    if name.lower() == 'date':
                        value = 'Fri, 14 Apr 2017 00:00:00 GMT'
                    elif name.lower() == 'server':
                        value = 'badhttpserver'

                    return super(badrequesthandler, self).send_header(name,
                                                                      value)

            self.RequestHandlerClass = badrequesthandler

        # Called to accept() a pending socket.
        def get_request(self):
            if self._ui.configbool(b'badserver', b'closebeforeaccept'):
                self.socket.close()

                # Tells the server to stop processing more requests.
                self.__shutdown_request = True

                # Simulate failure to stop processing this request.
                raise socket.error('close before accept')

            if self._ui.configbool(b'badserver', b'closeafteraccept'):
                request, client_address = super(badserver, self).get_request()
                request.close()
                raise socket.error('close after accept')

            return super(badserver, self).get_request()

        # Does heavy lifting of processing a request. Invokes
        # self.finish_request() which calls self.RequestHandlerClass() which
        # is a hgweb.server._httprequesthandler.
        def process_request(self, socket, address):
            # Wrap socket in a proxy if we need to count bytes.
            if self.closeafterrecvbytes:
                closeafterrecvbytes = self.closeafterrecvbytes.pop(0)
            else:
                closeafterrecvbytes = 0
            if self.closeaftersendbytes:
                closeaftersendbytes = self.closeaftersendbytes.pop(0)
            else:
                closeaftersendbytes = 0

            if closeafterrecvbytes or closeaftersendbytes:
                socket = socketproxy(socket, self.errorlog,
                                     closeafterrecvbytes=closeafterrecvbytes,
                                     closeaftersendbytes=closeaftersendbytes)

            return super(badserver, self).process_request(socket, address)

    server.MercurialHTTPServer = badserver