view tests/test-audit-path.t @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

The simple store doesn't escape paths robustly and can't store paths
with periods, etc. So much of this test fails with it.
#require no-reposimplestore

  $ hg init

audit of .hg

  $ hg add .hg/00changelog.i
  abort: path contains illegal component: .hg/00changelog.i
  [255]

#if symlink

Symlinks

  $ mkdir a
  $ echo a > a/a
  $ hg ci -Ama
  adding a/a
  $ ln -s a b
  $ echo b > a/b
  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]
  $ hg add b

should still fail - maybe

  $ hg add b/b
  abort: path 'b/b' traverses symbolic link 'b'
  [255]

  $ hg commit -m 'add symlink b'


Test symlink traversing when accessing history:
-----------------------------------------------

(build a changeset where the path exists as a directory)

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkdir b
  $ echo c > b/a
  $ hg add b/a
  $ hg ci -m 'add directory b'
  created new head

Test that hg cat does not do anything wrong the working copy has 'b' as directory

  $ hg cat b/a
  c
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

Test that hg cat does not do anything wrong the working copy has 'b' as a symlink (issue4749)

  $ hg up 'desc(symlink)'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cat b/a
  b/a: no such file in rev bc151a1f53bd
  [1]
  $ hg cat -r "desc(directory)" b/a
  c
  $ hg cat -r "desc(symlink)" b/a
  b/a: no such file in rev bc151a1f53bd
  [1]

#endif


unbundle tampered bundle

  $ hg init target
  $ cd target
  $ hg unbundle "$TESTDIR/bundles/tampered.hg"
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 6 files (+4 heads)
  new changesets b7da9bf6b037:fc1393d727bc (5 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

attack .hg/test

  $ hg manifest -r0
  .hg/test
  $ hg update -Cr0
  abort: path contains illegal component: .hg/test
  [255]

attack foo/.hg/test

  $ hg manifest -r1
  foo/.hg/test
  $ hg update -Cr1
  abort: path 'foo/.hg/test' is inside nested repo 'foo'
  [255]

attack back/test where back symlinks to ..

  $ hg manifest -r2
  back
  back/test
#if symlink
  $ hg update -Cr2
  abort: path 'back/test' traverses symbolic link 'back'
  [255]
#else
('back' will be a file and cause some other system specific error)
  $ hg update -Cr2
  abort: $TESTTMP/target/back/test: $ENOTDIR$
  [255]
#endif

attack ../test

  $ hg manifest -r3
  ../test
  $ mkdir ../test
  $ echo data > ../test/file
  $ hg update -Cr3
  abort: path contains illegal component: ../test
  [255]
  $ cat ../test/file
  data

attack /tmp/test

  $ hg manifest -r4
  /tmp/test
  $ hg update -Cr4
  abort: path contains illegal component: /tmp/test
  [255]

  $ cd ..

Test symlink traversal on merge:
--------------------------------

#if symlink

set up symlink hell

  $ mkdir merge-symlink-out
  $ hg init merge-symlink
  $ cd merge-symlink
  $ touch base
  $ hg commit -qAm base
  $ ln -s ../merge-symlink-out a
  $ hg commit -qAm 'symlink a -> ../merge-symlink-out'
  $ hg up -q 0
  $ mkdir a
  $ touch a/poisoned
  $ hg commit -qAm 'file a/poisoned'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: file a/poisoned
  |
  | o  1: symlink a -> ../merge-symlink-out
  |/
  o  0: base
  

try trivial merge

  $ hg up -qC 1
  $ hg merge 2
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]

try rebase onto other revision: cache of audited paths should be discarded,
and the rebase should fail (issue5628)

  $ hg up -qC 2
  $ hg rebase -s 2 -d 1 --config extensions.rebase=
  rebasing 2:e73c21d6b244 "file a/poisoned" (tip)
  abort: path 'a/poisoned' traverses symbolic link 'a'
  [255]
  $ ls ../merge-symlink-out

  $ cd ..

Test symlink traversal on update:
---------------------------------

  $ mkdir update-symlink-out
  $ hg init update-symlink
  $ cd update-symlink
  $ ln -s ../update-symlink-out a
  $ hg commit -qAm 'symlink a -> ../update-symlink-out'
  $ hg rm a
  $ mkdir a && touch a/b
  $ hg ci -qAm 'file a/b' a/b
  $ hg up -qC 0
  $ hg rm a
  $ mkdir a && touch a/c
  $ hg ci -qAm 'rm a, file a/c'
  $ hg log -G -T '{rev}: {desc}\n'
  @  2: rm a, file a/c
  |
  | o  1: file a/b
  |/
  o  0: symlink a -> ../update-symlink-out
  

try linear update where symlink already exists:

  $ hg up -qC 0
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]

try linear update including symlinked directory and its content: paths are
audited first by calculateupdates(), where no symlink is created so both
'a' and 'a/b' are taken as good paths. still applyupdates() should fail.

  $ hg up -qC null
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

try branch update replacing directory with symlink, and its content: the
path 'a' is audited as a directory first, which should be audited again as
a symlink.

  $ rm -f a
  $ hg up -qC 2
  $ hg up 1
  abort: path 'a/b' traverses symbolic link 'a'
  [255]
  $ ls ../update-symlink-out

  $ cd ..

#endif