view tests/test-contrib-check-code.t @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

  $ cat > correct.py <<NO_CHECK_EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > NO_CHECK_EOF
  $ cat > wrong.py <<NO_CHECK_EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > def badwrap():
  >     return 1 + \\
  >        2
  > NO_CHECK_EOF
  $ cat > quote.py <<NO_CHECK_EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > NO_CHECK_EOF
  $ cat > classstyle.py <<NO_CHECK_EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > NO_CHECK_EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./wrong.py:5:
   >     return 1 + \
   Use () to wrap long lines in Python, not \
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() creates old style object, use class foo(object)
  [1]
  $ cat > python3-compat.py << NO_CHECK_EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > NO_CHECK_EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > foo.c <<NO_CHECK_EOF
  > void narf() {
  > 	strcpy(foo, bar);
  > 	// strcpy_s is okay, but this comment is not
  > 	strcpy_s(foo, bar);
  > }
  > NO_CHECK_EOF
  $ "$check_code" ./foo.c
  ./foo.c:2:
   > 	strcpy(foo, bar);
   don't use strcpy, use strlcpy or memcpy
  ./foo.c:3:
   > 	// strcpy_s is okay, but this comment is not
   don't use //-style comments
  [1]

  $ cat > is-op.py <<NO_CHECK_EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > NO_CHECK_EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<NO_CHECK_EOF
  > except:
  > NO_CHECK_EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<NO_CHECK_EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > NO_CHECK_EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > error.t <<NO_CHECK_EOF
  >   $ [ foo == bar ]
  > NO_CHECK_EOF
  $ "$check_code" error.t
  error.t:1:
   >   $ [ foo == bar ]
   [ foo == bar ] is a bashism, use [ foo = bar ] instead
  [1]
  $ rm error.t
  $ cat > raise-format.py <<NO_CHECK_EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > NO_CHECK_EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat <<NO_CHECK_EOF > tab.t
  > 	indent
  >   > 	heredoc
  > NO_CHECK_EOF
  $ "$check_code" tab.t
  tab.t:1:
   > 	indent
   don't use tabs to indent
  [1]
  $ rm tab.t

  $ cat > rst.py <<NO_CHECK_EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > NO_CHECK_EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<NO_CHECK_EOF
  > print(_("map inside gettext %s" % v))
  > 
  > print(_("concatenating " " by " " space %s" % v))
  > print(_("concatenating " + " by " + " '+' %s" % v))
  > 
  > print(_("mapping operation in different line %s"
  >         % v))
  > 
  > print(_(
  >         "leading spaces inside of '(' %s" % v))
  > NO_CHECK_EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print(_("map inside gettext %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print(_("concatenating " " by " " space %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print(_("concatenating " + " by " + " '+' %s" % v))
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print(_("mapping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print(_(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<NO_CHECK_EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > NO_CHECK_EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]

'string join across lines with no space' detection

  $ cat > stringjoin.py <<NO_CHECK_EOF
  > foo = (' foo'
  >        'bar foo.'
  >        'bar foo:'
  >        'bar foo@'
  >        'bar foo%'
  >        'bar foo*'
  >        'bar foo+'
  >        'bar foo-'
  >        'bar')
  > NO_CHECK_EOF

'missing _() in ui message' detection

  $ cat > uigettext.py <<NO_CHECK_EOF
  > ui.status("% 10s %05d % -3.2f %*s %%"
  >           # this use '\\\\' instead of '\\', because the latter in
  >           # heredoc on shell becomes just '\'
  >           '\\\\ \n \t \0'
  >           """12345
  >           """
  >           '''.:*+-=
  >           ''' "%-6d \n 123456 .:*+-= foobar")
  > NO_CHECK_EOF

superfluous pass

  $ cat > superfluous_pass.py <<NO_CHECK_EOF
  > # correct examples
  > if foo:
  >     pass
  > else:
  >     # comment-only line means still need pass
  >     pass
  > def nothing():
  >     pass
  > class empty(object):
  >     pass
  > if whatever:
  >     passvalue(value)
  > # bad examples
  > if foo:
  >     "foo"
  >     pass
  > else: # trailing comment doesn't fool checker
  >     wat()
  >     pass
  > def nothing():
  >     "docstring means no pass"
  >     pass
  > class empty(object):
  >     """multiline
  >     docstring also
  >     means no pass"""
  >     pass
  > NO_CHECK_EOF

(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)

  $ "$check_code" stringjoin.py uigettext.py superfluous_pass.py
  stringjoin.py:1:
   > foo = (' foo'
   string join across lines with no space
  stringjoin.py:2:
   >        'bar foo.'
   string join across lines with no space
  stringjoin.py:3:
   >        'bar foo:'
   string join across lines with no space
  stringjoin.py:4:
   >        'bar foo@'
   string join across lines with no space
  stringjoin.py:5:
   >        'bar foo%'
   string join across lines with no space
  stringjoin.py:6:
   >        'bar foo*'
   string join across lines with no space
  stringjoin.py:7:
   >        'bar foo+'
   string join across lines with no space
  stringjoin.py:8:
   >        'bar foo-'
   string join across lines with no space
  uigettext.py:1:
   > ui.status("% 10s %05d % -3.2f %*s %%"
   missing _() in ui message (use () to hide false-positives)
  superfluous_pass.py:14:
   > if foo:
   omit superfluous pass
  superfluous_pass.py:17:
   > else: # trailing comment doesn't fool checker
   omit superfluous pass
  superfluous_pass.py:20:
   > def nothing():
   omit superfluous pass
  superfluous_pass.py:23:
   > class empty(object):
   omit superfluous pass
  [1]

Check code fragments embedded in test script

  $ cat > embedded-code.t <<NO_CHECK_EOF
  > code fragment in doctest style
  >   >>> x = (1,2)
  >   ... 
  >   ... x = (1,2)
  > 
  > code fragment in heredoc style
  >   $ python <<EOF
  >   > x = (1,2)
  >   > EOF
  > 
  > code fragment in file heredoc style
  >   $ python > file.py <<EOF
  >   > x = (1,2)
  >   > EOF
  > NO_CHECK_EOF
  $ "$check_code" embedded-code.t
  embedded-code.t:2:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:4:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:8:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:13:
   > x = (1,2)
   missing whitespace after ,
  [1]

"max warnings per file" is shared by all embedded code fragments

  $ "$check_code" --per-file=3 embedded-code.t
  embedded-code.t:2:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:4:
   > x = (1,2)
   missing whitespace after ,
  embedded-code.t:8:
   > x = (1,2)
   missing whitespace after ,
   (too many errors, giving up)
  [1]