view tests/test-diffstat.t @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

  $ hg init repo
  $ cd repo
  $ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
  $ hg add a
  $ cp a b
  $ hg add b

Wide diffstat:

  $ hg diff --stat
   a |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   b |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

diffstat width:

  $ COLUMNS=24 hg diff --config ui.interactive=true --stat
   a |  213 ++++++++++++++
   b |  213 ++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

  $ hg ci -m adda

  $ cat >> a <<EOF
  > a
  > a
  > a
  > EOF

Narrow diffstat:

  $ hg diff --stat
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)

  $ hg ci -m appenda

  >>> open("c", "wb").write(b"\0") and None
  $ touch d
  $ hg add c d

Binary diffstat:

  $ hg diff --stat
   c |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Binary git diffstat:

  $ hg diff --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg ci -m createb

  >>> open("file with spaces", "wb").write(b"\0") and None
  $ hg add "file with spaces"

Filename with spaces diffstat:

  $ hg diff --stat
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename with spaces git diffstat:

  $ hg diff --stat --git
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename without "a/" or "b/" (issue5759):

  $ hg diff --config 'diff.noprefix=1' -c1 --stat --git
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  $ hg diff --config 'diff.noprefix=1' -c2 --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
  changeset:   1:3a95b07bb77f
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     appenda
  
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  
  diff --git a a
  --- a
  +++ a
  @@ -211,3 +211,6 @@
   a
   a
   a
  +a
  +a
  +a
  
  changeset:   2:c60a6c753773
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     createb
  
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)
  
  diff --git c c
  new file mode 100644
  index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..f76dd238ade08917e6712764a16a22005a50573d
  GIT binary patch
  literal 1
  Ic${MZ000310RR91
  
  diff --git d d
  new file mode 100644
  

diffstat within directories:

  $ hg rm -f 'file with spaces'

  $ mkdir dir1 dir2
  $ echo new1 > dir1/new
  $ echo new2 > dir2/new
  $ hg add dir1/new dir2/new
  $ hg diff --stat
   dir1/new |  1 +
   dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1 dir2
  warning: dir2 not inside relative root dir1

  $ hg diff --stat --root dir1 -I dir1/old

  $ cd dir1
  $ hg diff --stat .
   dir1/new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat --root .
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
  $ hg diff --stat --root .. --config ui.relative-paths=yes
   new         |  1 +
   ../dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)
  $ hg diff --stat --root ../dir1 ../dir2
  warning: ../dir2 not inside relative root .

  $ hg diff --stat --root . -I old

  $ cd ..

Files with lines beginning with '--' or '++' should be properly counted in diffstat

  $ hg up -Cr tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm dir1/new
  $ rm dir2/new
  $ rm "file with spaces"
  $ cat > file << EOF
  > line 1
  > line 2
  > line 3
  > EOF
  $ hg commit -Am file
  adding file

Lines added starting with '--' should count as additions
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes
  > line 3
  > EOF

  $ hg diff --root .
  diff -r be1569354b24 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  -line 2
  +-- line 2, with dashes
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
  $ hg commit -m filev2
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes, changed again
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +-- line 2, with dashes, changed again
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
  $ cat > file << EOF
  > line 1
  > ++ line 2, switched dashes to plusses
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +++ line 2, switched dashes to plusses
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

When a file is renamed, --git shouldn't loss the info about old file
  $ hg init issue6025
  $ cd issue6025
  $ echo > a
  $ hg ci -Am 'add a'
  adding a
  $ hg mv a b
  $ hg diff --git
  diff --git a/a b/b
  rename from a
  rename to b
  $ hg diff --stat
   a |  1 -
   b |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   a => b |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
  $ echo > c
  $ hg ci -Am 'add c'
  adding c
  $ hg mv c 'new c'
  $ hg diff --git
  diff --git a/c b/new c
  rename from c
  rename to new c
  $ hg diff --stat
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   c => new c |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)

Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)

  $ hg status
  A new c
  R c
  $ hg diff --stat -q
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)