view tests/test-http-api-httpv2.t @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

#require no-chg

  $ . $TESTDIR/wireprotohelpers.sh
  $ enabledummycommands

  $ hg init server
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > EOF
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

HTTP v2 protocol not enabled by default

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003 HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 33\r\n
  s>     \r\n
  s>     API exp-http-v2-0003 not enabled\n

Restart server with support for HTTP v2 API

  $ killdaemons.py
  $ enablehttpv2 server
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Request to unknown command yields 404

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

GET to read-only command yields a 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Missing Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: invalid
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: invalid\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Content-Type header results in 415

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     user-agent: test
  >     content-type: badmedia
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: badmedia\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 415 Unsupported Media Type\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 88\r\n
  s>     \r\n
  s>     client MUST send Content-Type header with value: application/mercurial-exp-framing-0006\n

Request to read-only command works out of the box

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

  $ sendhttpv2peerverbose << EOF
  > command customreadonly
  > EOF
  creating http peer for wire protocol version 2
  sending customreadonly command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 65\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x15\x00\x00\x01\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041
  s>     X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: gen[
    b'customreadonly bytes response'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

Request to read-write command fails because server is read-only by default

GET to read-write request yields 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Even for unknown commands

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     GET /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

SSL required by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 403 ssl required\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Length: 17\r\n
  s>     \r\n
  s>     permission denied

Restart server to allow non-ssl read-write operations

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Authorized request for valid read-write command works

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Authorized request for unknown command is rejected

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/badcommand
  >     user-agent: test
  >     accept: $MEDIATYPE
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

debugreflect isn't enabled by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     user-agent: test
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 34\r\n
  s>     \r\n
  s>     debugreflect service not available

Restart server to get debugreflect endpoint

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Command frames can be reflected via debugreflect

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'command1', b'args': {b'foo': b'val1', b'bar1': b'val'}}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 47\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \'\x00\x00\x01\x00\x01\x01\x11\xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 223\r\n
  s>     \r\n
  s>     received: 1 1 1 \xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1\n
  s>     ["runcommand", {"args": {"bar1": "val", "foo": "val1"}, "command": "command1", "data": null, "redirect": null, "requestid": 1}]\n
  s>     received: <no frame>\n
  s>     {"action": "noop"}

Multiple requests to regular command URL are not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Multiple requests to "multirequest" URL are allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  >     frame 3 1 0 command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     *\r\n (glob)
  s>     user-agent: test\r\n
  s>     content-length: 58\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly\x15\x00\x00\x03\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x03\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Interleaved requests to "multirequest" are processed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request continuation JnamespacesDnameHlistkeys
  >     frame 1 1 0 command-request continuation IbookmarksDnameHlistkeys
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 115\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x11\x00\x00\x01\x00\x01\x01\x15\xa2Dargs\xa1Inamespace\x11\x00\x00\x03\x00\x01\x00\x15\xa2Dargs\xa1Inamespace\x19\x00\x00\x03\x00\x01\x00\x12JnamespacesDnameHlistkeys\x18\x00\x00\x01\x00\x01\x00\x12IbookmarksDnameHlistkeys
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x03\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     28\r\n
  s>      \x00\x00\x03\x00\x02\x041\xa3Ibookmarks@Jnamespaces@Fphases@
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     9\r\n
  s>     \x01\x00\x00\x01\x00\x02\x041\xa0
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Restart server to disable read-write access

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Attempting to run a read-write command via multirequest on read-only URL is not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'pushkey'}
  > EOF
  using raw connection to peer
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 22\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x0e\x00\x00\x01\x00\x01\x01\x11\xa1DnameGpushkey
  s> makefile('rb', None)
  s>     HTTP/1.1 403 Forbidden\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 52\r\n
  s>     \r\n
  s>     insufficient permissions to execute command: pushkey

Defining an invalid content encoding results in warning

  $ hg --config experimental.httppeer.v2-encoder-order=identity,badencoder --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  wire protocol version 2 encoder referenced in config (badencoder) is not known; ignoring
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 56\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  s>     1e\r\n
  s>     \x16\x00\x00\x01\x00\x02\x041
  s>     \x81T\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#if zstd

  $ hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  s> setsockopt(6, 1, 1) -> None (?)
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 70\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     *\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x83Hzstd-8mbDzlibHidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hzstd-8mb
  s>     \r\n
  s>     25\r\n
  s>     \x1d\x00\x00\x01\x00\x02\x042
  s>     (\xb5/\xfd\x00X\xa4\x00\x00p\xa1FstatusBok\x81T\x00\x01\x00\tP\x02
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#endif

  $ cat error.log