view tests/test-install.t @ 42377:0546ead39a7e stable

manifest: avoid corruption by dropping removed files with pure (issue5801)

Previously, removed files would simply be marked by overwriting the first byte
with NUL and dropping their entry in `self.position`.  But no effort was made to
ignore them when compacting the dictionary into text form.  This allowed them to
slip into the manifest revision, since the code seems to be trying to minimize
the string operations by copying as large a chunk as possible.  As part of this,
compact() walks the existing text based on entries in the `positions` list, and
consumed everything up to the next position entry.   This typically resulted in
a ValueError complaining about unsorted manifest entries.

Sometimes it seems that files do get dropped in large repos- it seems to
correspond to there being a new entry that would take the same slot.  A much
more trivial problem is that if the only changes were removals, `_compact()`
didn't even run because `__delitem__` doesn't add anything to `self.extradata`.
Now there's an explicit variable to flag this, both to allow `_compact()` to
run, and to avoid searching the manifest in cases where there are no removals.

In practice, this behavior was mostly obscured by the check in fastdelta() which
takes a different path that explicitly drops removed files if there are fewer
than 1000 changes.  However, timeless has a repo where after rebasing tens of
commits, a totally different path[1] is taken that bypasses the change count
check and hits this problem.

[1] https://www.mercurial-scm.org/repo/hg/file/2338bdea4474/mercurial/manifest.py#l1511

hg debuginstall
  $ hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob) (no-py3 !)
  checking Python version (3.*) (glob) (py3 !)
  checking Python lib (.*[Ll]ib.*)... (re)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username (test)
  no problems detected

hg debuginstall JSON
  $ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesserver": [*"zlib"*], (glob)
    "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
    "defaulttemplateerror": null,
    "defaulttemplatenotfound": "default",
    "editor": "*", (glob)
    "editornotfound": false,
    "encoding": "ascii",
    "encodingerror": null,
    "extensionserror": null, (no-pure !)
    "hgmodulepolicy": "*", (glob)
    "hgmodules": "*mercurial", (glob)
    "hgver": "*", (glob)
    "hgverextra": "*", (glob)
    "problems": 0,
    "pythonexe": "*", (glob)
    "pythonlib": "*", (glob)
    "pythonsecurity": [*], (glob)
    "pythonver": "*.*.*", (glob)
    "re2": (true|false), (re)
    "templatedirs": "*mercurial?templates", (glob)
    "username": "test",
    "usernameerror": null,
    "vinotfound": false
   }
  ]

hg debuginstall with no username
  $ HGUSER= hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob) (no-py3 !)
  checking Python version (3.*) (glob) (py3 !)
  checking Python lib (.*[Ll]ib.*)... (re)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username...
   no username supplied
   (specify a username in your configuration file)
  1 problems detected, please check your install!
  [1]

hg debuginstall with invalid encoding
  $ HGENCODING=invalidenc hg debuginstall | grep encoding
  checking encoding (invalidenc)...
   unknown encoding: invalidenc

exception message in JSON

  $ HGENCODING=invalidenc HGUSER= hg debuginstall -Tjson | grep error
    "defaulttemplateerror": null,
    "encodingerror": "unknown encoding: invalidenc",
    "extensionserror": null, (no-pure !)
    "usernameerror": "no username supplied",

path variables are expanded (~ is the same as $TESTTMP)
  $ mkdir tools
  $ touch tools/testeditor.exe
#if execbit
  $ chmod 755 tools/testeditor.exe
#endif
  $ HGEDITOR="~/tools/testeditor.exe" hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob) (no-py3 !)
  checking Python version (3.*) (glob) (py3 !)
  checking Python lib (.*[Ll]ib.*)... (re)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... ($TESTTMP/tools/testeditor.exe)
  checking username (test)
  no problems detected

print out the binary post-shlexsplit in the error message when commit editor is
not found (this is intentionally using backslashes to mimic a windows usecase).
  $ HGEDITOR="c:\foo\bar\baz.exe -y -z" hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob) (no-py3 !)
  checking Python version (3.*) (glob) (py3 !)
  checking Python lib (.*[Ll]ib.*)... (re)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (c:\foo\bar\baz.exe) (windows !)
   Can't find editor 'c:\foo\bar\baz.exe' in PATH (windows !)
  checking commit editor... (c:foobarbaz.exe) (no-windows !)
   Can't find editor 'c:foobarbaz.exe' in PATH (no-windows !)
   (specify a commit editor in your configuration file)
  checking username (test)
  1 problems detected, please check your install!
  [1]

#if test-repo
  $ . "$TESTDIR/helpers-testrepo.sh"

  $ cat >> wixxml.py << EOF
  > import os
  > import subprocess
  > import sys
  > import xml.etree.ElementTree as ET
  > from mercurial import pycompat
  > 
  > # MSYS mangles the path if it expands $TESTDIR
  > testdir = os.environ['TESTDIR']
  > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
  > 
  > def directory(node, relpath):
  >     '''generator of files in the xml node, rooted at relpath'''
  >     dirs = node.findall('./{%(wix)s}Directory' % ns)
  > 
  >     for d in dirs:
  >         for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
  >             yield subfile
  > 
  >     files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
  > 
  >     for f in files:
  >         yield pycompat.sysbytes(relpath + f.attrib['Name'])
  > 
  > def hgdirectory(relpath):
  >     '''generator of tracked files, rooted at relpath'''
  >     hgdir = "%s/../mercurial" % (testdir)
  >     args = ['hg', '--cwd', hgdir, 'files', relpath]
  >     proc = subprocess.Popen(args, stdout=subprocess.PIPE,
  >                             stderr=subprocess.PIPE)
  >     output = proc.communicate()[0]
  > 
  >     for line in output.splitlines():
  >         if os.name == 'nt':
  >             yield line.replace(pycompat.sysbytes(os.sep), b'/')
  >         else:
  >             yield line
  > 
  > tracked = [f for f in hgdirectory(sys.argv[1])]
  > 
  > xml = ET.parse("%s/../contrib/packaging/wix/%s.wxs" % (testdir, sys.argv[1]))
  > root = xml.getroot()
  > dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
  > 
  > installed = [f for f in directory(dir, '')]
  > 
  > print('Not installed:')
  > for f in sorted(set(tracked) - set(installed)):
  >     print('  %s' % pycompat.sysstr(f))
  > 
  > print('Not tracked:')
  > for f in sorted(set(installed) - set(tracked)):
  >     print('  %s' % pycompat.sysstr(f))
  > EOF

  $ ( testrepohgenv; "$PYTHON" wixxml.py help )
  Not installed:
    help/common.txt
    help/hg-ssh.8.txt
    help/hg.1.txt
    help/hgignore.5.txt
    help/hgrc.5.txt
  Not tracked:

  $ ( testrepohgenv; "$PYTHON" wixxml.py templates )
  Not installed:
  Not tracked:

#endif

#if virtualenv

Verify that Mercurial is installable with pip. Note that this MUST be
the last test in this file, because we do some nasty things to the
shell environment in order to make the virtualenv work reliably.

  $ cd $TESTTMP
Note: --no-site-packages is deprecated, but some places have an
ancient virtualenv from their linux distro or similar and it's not yet
the default for them.
  $ unset PYTHONPATH
  $ "$PYTHON" -m virtualenv --no-site-packages --never-download installenv >> pip.log
  DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7. (?)
Note: we use this weird path to run pip and hg to avoid platform differences,
since it's bin on most platforms but Scripts on Windows.
  $ ./installenv/*/pip install --no-index $TESTDIR/.. >> pip.log
  DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7. (?)
  $ ./installenv/*/hg debuginstall || cat pip.log
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob) (no-py3 !)
  checking Python version (3.*) (glob) (py3 !)
  checking Python lib (*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*/mercurial)... (glob)
  checking registered compression engines (*) (glob)
  checking available compression engines (*) (glob)
  checking available compression engines for wire protocol (*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates ($TESTTMP/installenv/*/site-packages/mercurial/templates)... (glob)
  checking default template ($TESTTMP/installenv/*/site-packages/mercurial/templates/map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username (test)
  no problems detected
#endif