Mercurial > hg
view tests/test-commit-interactive-curses.t @ 37173:05ff1a155a21
memctx: create parent contexts using "repo[p]" syntax
I want to reduce dependence on basectx.__new__() and move that code
over to repo.__getitem__().
Differential Revision: https://phab.mercurial-scm.org/D2968
author | Martin von Zweigbergk <martinvonz@google.com> |
---|---|
date | Thu, 29 Mar 2018 22:22:51 -0700 |
parents | 4441705b7111 |
children | b95a6fb7ae66 03350f5234a4 |
line wrap: on
line source
#require tic Set up a repo $ cp $HGRCPATH $HGRCPATH.pretest $ cat <<EOF >> $HGRCPATH > [ui] > interactive = true > interface = curses > [experimental] > crecordtest = testModeCommands > EOF Record with noeol at eof (issue5268) $ hg init noeol $ cd noeol $ printf '0' > a $ printf '0\n' > b $ hg ci -Aqm initial $ printf '1\n0' > a $ printf '1\n0\n' > b $ cat <<EOF >testModeCommands > c > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "add hunks" -d "0 0" $ cd .. Normal repo $ hg init a $ cd a Committing some changes but stopping on the way $ echo "a" > a $ hg add a $ cat <<EOF >testModeCommands > TOGGLE > X > EOF $ hg commit -i -m "a" -d "0 0" no changes to record [1] $ hg tip changeset: -1:000000000000 tag: tip user: date: Thu Jan 01 00:00:00 1970 +0000 Committing some changes $ cat <<EOF >testModeCommands > X > EOF $ hg commit -i -m "a" -d "0 0" $ hg tip changeset: 0:cb9a9f314b8b tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: a Check that commit -i works with no changes $ hg commit -i no changes to record [1] Committing only one file $ echo "a" >> a >>> open('b', 'wb').write("1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n") $ hg add b $ cat <<EOF >testModeCommands > TOGGLE > KEY_DOWN > X > EOF $ hg commit -i -m "one file" -d "0 0" $ hg tip changeset: 1:fb2705a663ea tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: one file $ hg cat -r tip a a $ cat a a a Committing only one hunk while aborting edition of hunk - Untoggle all the hunks, go down to the second file - unfold it - go down to second hunk (1 for the first hunk, 1 for the first hunkline, 1 for the second hunk, 1 for the second hunklike) - toggle the second hunk - toggle on and off the amend mode (to check that it toggles off) - edit the hunk and quit the editor immediately with non-zero status - commit $ printf "printf 'editor ran\n'; exit 1" > editor.sh $ echo "x" > c $ cat b >> c $ echo "y" >> c $ mv c b $ cat <<EOF >testModeCommands > A > KEY_DOWN > f > KEY_DOWN > KEY_DOWN > KEY_DOWN > KEY_DOWN > TOGGLE > a > a > e > X > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "one hunk" -d "0 0" editor ran $ rm editor.sh $ hg tip changeset: 2:7d10dfe755a8 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: one hunk $ hg cat -r tip b 1 2 3 4 5 6 7 8 9 10 y $ cat b x 1 2 3 4 5 6 7 8 9 10 y $ hg commit -m "other hunks" $ hg tip changeset: 3:a6735021574d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: other hunks $ hg cat -r tip b x 1 2 3 4 5 6 7 8 9 10 y Newly added files can be selected with the curses interface $ hg update -C . 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "hello" > x $ hg add x $ cat <<EOF >testModeCommands > TOGGLE > TOGGLE > X > EOF $ hg st A x ? testModeCommands $ hg commit -i -m "newly added file" -d "0 0" $ hg st ? testModeCommands Amend option works $ echo "hello world" > x $ hg diff -c . diff -r a6735021574d -r 2b0e9be4d336 x --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/x Thu Jan 01 00:00:00 1970 +0000 @@ -0,0 +1,1 @@ +hello $ cat <<EOF >testModeCommands > a > X > EOF $ hg commit -i -m "newly added file" -d "0 0" saved backup bundle to $TESTTMP/a/.hg/strip-backup/2b0e9be4d336-3cf0bc8c-amend.hg $ hg diff -c . diff -r a6735021574d -r c1d239d165ae x --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/x Thu Jan 01 00:00:00 1970 +0000 @@ -0,0 +1,1 @@ +hello world Editing a hunk puts you back on that hunk when done editing (issue5041) To do that, we change two lines in a file, pretend to edit the second line, exit, toggle the line selected at the end of the edit and commit. The first line should be recorded if we were put on the second line at the end of the edit. $ hg update -C . 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "foo" > x $ echo "hello world" >> x $ echo "bar" >> x $ cat <<EOF >testModeCommands > f > KEY_DOWN > KEY_DOWN > KEY_DOWN > KEY_DOWN > e > TOGGLE > X > EOF $ printf "printf 'editor ran\n'; exit 0" > editor.sh $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "edit hunk" -d "0 0" editor ran $ hg cat -r . x foo hello world Testing the review option. The entire final filtered patch should show up in the editor and be editable. We will unselect the second file and the first hunk of the third file. During review, we will decide that "lower" sounds better than "bottom", and the final commit should reflect this edition. $ hg update -C . 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "top" > c $ cat x >> c $ echo "bottom" >> c $ mv c x $ echo "third a" >> a $ echo "we will unselect this" >> b $ cat > editor.sh <<EOF > cat "\$1" > cat "\$1" | sed s/bottom/lower/ > tmp > mv tmp "\$1" > EOF $ cat > testModeCommands <<EOF > KEY_DOWN > TOGGLE > KEY_DOWN > f > KEY_DOWN > TOGGLE > R > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "review hunks" -d "0 0" # To remove '-' lines, make them ' ' lines (context). # To remove '+' lines, delete them. # Lines starting with # will be removed from the patch. # # If the patch applies cleanly, the edited patch will immediately # be finalised. If it does not apply cleanly, rejects files will be # generated. You can use those when you try again. diff --git a/a b/a --- a/a +++ b/a @@ -1,2 +1,3 @@ a a +third a diff --git a/x b/x --- a/x +++ b/x @@ -1,2 +1,3 @@ foo hello world +bottom $ hg cat -r . a a a third a $ hg cat -r . b x 1 2 3 4 5 6 7 8 9 10 y $ hg cat -r . x foo hello world lower Check spacemovesdown $ cat <<EOF >> $HGRCPATH > [experimental] > spacemovesdown = true > EOF $ cat <<EOF >testModeCommands > TOGGLE > TOGGLE > X > EOF $ hg status -q M b M x $ hg commit -i -m "nothing to commit?" -d "0 0" no changes to record [1] Check ui.interface logic for the chunkselector The default interface is text $ cp $HGRCPATH.pretest $HGRCPATH $ chunkselectorinterface() { > $PYTHON <<EOF > from mercurial import hg, ui;\ > repo = hg.repository(ui.ui.load(), ".");\ > print(repo.ui.interface("chunkselector")) > EOF > } $ chunkselectorinterface text If only the default is set, we'll use that for the feature, too $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > EOF $ chunkselectorinterface curses It is possible to override the default interface with a feature specific interface $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = text > interface.chunkselector = curses > EOF $ chunkselectorinterface curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > interface.chunkselector = text > EOF $ chunkselectorinterface text If a bad interface name is given, we use the default value (with a nice error message to suggest that the configuration needs to be fixed) $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > EOF $ chunkselectorinterface invalid value for ui.interface: blah (using text) text $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > interface.chunkselector = blah > EOF $ chunkselectorinterface invalid value for ui.interface.chunkselector: blah (using curses) curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > interface.chunkselector = curses > EOF $ chunkselectorinterface invalid value for ui.interface: blah curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > interface.chunkselector = blah > EOF $ chunkselectorinterface invalid value for ui.interface: blah invalid value for ui.interface.chunkselector: blah (using text) text