view hgext/gpg.py @ 40736:0728d87a8631

store: append to fncache if there are only new files to write Before this patch, if we have to add a new entry to fncache, we write the whole fncache again which slows things down on large fncache which have millions of entries. Addition of a new entry is common operation while pulling new files or commiting a new file. This patch adds a new fncache.addls set which keeps track of the additions happening and store them. When we write the fncache, we will just read the addls set and append those entries at the end of fncache. We make sure that the entries are new entries by loading the fncache and making sure entry does not exists there. In future if we can check if an entry is new without loading the fncache, that will speed up things more. Performance numbers for commiting a new file: mercurial repo before: 0.08784651756286621 after: 0.08474504947662354 mozilla-central before: 1.83314049243927 after: 1.7054164409637451 netbeans before: 0.7953150272369385 after: 0.7202838659286499 pypy before: 0.17805707454681396 after: 0.13431048393249512 In our internal repo, the performance improvement is in seconds. I have used octobus's ASV perf benchmark thing to get the above numbers. I also see some minute perf improvements related to creating a new commit without a new file, but I believe that's just some noise. Differential Revision: https://phab.mercurial-scm.org/D5301
author Pulkit Goyal <pulkit@yandex-team.ru>
date Fri, 23 Nov 2018 18:58:16 +0300
parents c303d65d2e34
children 0531dff73d0b
line wrap: on
line source

# Copyright 2005, 2006 Benoit Boissinot <benoit.boissinot@ens-lyon.org>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    error,
    help,
    match,
    node as hgnode,
    pycompat,
    registrar,
)
from mercurial.utils import (
    dateutil,
    procutil,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

configitem('gpg', 'cmd',
    default='gpg',
)
configitem('gpg', 'key',
    default=None,
)
configitem('gpg', '.*',
    default=None,
    generic=True,
)

# Custom help category
_HELP_CATEGORY = 'gpg'

class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and " --local-user \"%s\"" % key) or ""

    def sign(self, data):
        gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
        return procutil.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = pycompat.mkstemp(prefix="hg-gpg-", suffix=".sig")
            fp = os.fdopen(fd, r'wb')
            fp.write(sig)
            fp.close()
            fd, datafile = pycompat.mkstemp(prefix="hg-gpg-", suffix=".txt")
            fp = os.fdopen(fd, r'wb')
            fp.write(data)
            fp.close()
            gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                      "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
            ret = procutil.filter("", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith("[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith("VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith("ERRSIG"):
                key = l.split(" ", 3)[:2]
                key.append("")
                fingerprint = None
            elif (l.startswith("GOODSIG") or
                  l.startswith("EXPSIG") or
                  l.startswith("EXPKEYSIG") or
                  l.startswith("BADSIG")):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys

def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config("gpg", "cmd")
    gpgkey = opts.get(r'key')
    if not gpgkey:
        gpgkey = ui.config("gpg", "key")
    return gpg(gpgpath, gpgkey)

def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """
    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(".hgsigs")
    for r in reversed(fl.heads()):
        fn = ".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = "localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass

def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = "%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == "ERRSIG":
            ui.write(_("%s Unknown key ID \"%s\"\n") % (prefix, key[1]))
            continue
        if key[0] == "BADSIG":
            ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == "EXPSIG":
            ui.write(_("%s Note: Signature has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        elif key[0] == "EXPKEYSIG":
            ui.write(_("%s Note: This key has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        validkeys.append((key[1], key[2], key[3]))
    return validkeys

@command("sigs", [], _('hg sigs'), helpcategory=_HELP_CATEGORY)
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write("%-30s %s\n" % (keystr(ui, k), r))

@command("sigcheck", [], _('hg sigcheck REV'), helpcategory=_HELP_CATEGORY)
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_("%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(" %s\n" % keystr(ui, key))

def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config("gpg", fingerprint)
    if comment:
        return "%s (%s)" % (user, comment)
    else:
        return user

@command("sign",
         [('l', 'local', None, _('make the signature local')),
          ('f', 'force', None, _('sign even if the sigfile is modified')),
          ('', 'no-commit', None, _('do not commit the sigfile after signing')),
          ('k', 'key', '',
           _('the key id to sign with'), _('ID')),
          ('m', 'message', '',
           _('use text as commit message'), _('TEXT')),
          ('e', 'edit', False, _('invoke editor on commit messages')),
         ] + cmdutil.commitopts2,
         _('hg sign [OPTION]... [REV]...'),
         helpcategory=_HELP_CATEGORY)
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)

def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    opts = pycompat.byteskwargs(opts)
    sigver = "0"
    sigmessage = ""

    date = opts.get('date')
    if date:
        opts['date'] = dateutil.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [node for node in repo.dirstate.parents()
                 if node != hgnode.nullid]
        if len(nodes) > 1:
            raise error.Abort(_('uncommitted merge - please provide a '
                               'specific revision'))
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
                                         hgnode.short(n)))
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_("error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace("\n", "")
        sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts['local']:
        repo.vfs.append("localsigs", sigmessage)
        return

    if not opts["force"]:
        msigs = match.exact(repo.root, '', ['.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(_("working copy of .hgsigs is changed "),
                             hint=_("please commit .hgsigs manually"))

    sigsfile = repo.wvfs(".hgsigs", "ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if '.hgsigs' not in repo.dirstate:
        repo[None].add([".hgsigs"])

    if opts["no_commit"]:
        return

    message = opts['message']
    if not message:
        # we don't translate commit messages
        message = "\n".join(["Added signature for changeset %s"
                             % hgnode.short(n)
                             for n in nodes])
    try:
        editor = cmdutil.getcommiteditor(editform='gpg.sign',
                                         **pycompat.strkwargs(opts))
        repo.commit(message, opts['user'], opts['date'], match=msigs,
                    editor=editor)
    except ValueError as inst:
        raise error.Abort(pycompat.bytestr(inst))

def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == "0":
        return "%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_("unknown signature version"))

def extsetup(ui):
    # Add our category before "Repository maintenance".
    help.CATEGORY_ORDER.insert(
        help.CATEGORY_ORDER.index(command.CATEGORY_MAINTENANCE),
        _HELP_CATEGORY)
    help.CATEGORY_NAMES[_HELP_CATEGORY] = 'GPG signing'