view hgext/split.py @ 40736:0728d87a8631

store: append to fncache if there are only new files to write

Before this patch, if we have to add a new entry to fncache, we write the whole
fncache again which slows things down on large fncache which have millions of
entries. Addition of a new entry is common operation while pulling new files or
commiting a new file.

This patch adds a new fncache.addls set which keeps track of the additions
happening and store them. When we write the fncache, we will just read the addls
set and append those entries at the end of fncache.
We make sure that the entries are new entries by loading the fncache and making
sure entry does not exists there. In future if we can check if an entry is new
without loading the fncache, that will speed up things more.

Performance numbers for commiting a new file:

mercurial repo
before: 0.08784651756286621
after: 0.08474504947662354

mozilla-central
before: 1.83314049243927
after: 1.7054164409637451

netbeans
before: 0.7953150272369385
after: 0.7202838659286499

pypy
before: 0.17805707454681396
after: 0.13431048393249512

In our internal repo, the performance improvement is in seconds.

I have used octobus's ASV perf benchmark thing to get the above numbers. I also
see some minute perf improvements related to creating a new commit without a new
file, but I believe that's just some noise.

Differential Revision: https://phab.mercurial-scm.org/D5301

# split.py - split a changeset into smaller ones
#
# Copyright 2015 Laurent Charignon <[e-mail]>
# Copyright 2017 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""command to split a changeset into smaller ones (EXPERIMENTAL)"""

from __future__ import absolute_import

from mercurial.i18n import _

from mercurial.node import (
    nullid,
    short,
)

from mercurial import (
    bookmarks,
    cmdutil,
    commands,
    error,
    hg,
    obsolete,
    phases,
    pycompat,
    registrar,
    revsetlang,
    scmutil,
)

# allow people to use split without explicitly enabling rebase extension
from . import (
    rebase,
)

cmdtable = {}
command = registrar.command(cmdtable)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('split',
    [('r', 'rev', '', _("revision to split"), _('REV')),
     ('', 'rebase', True, _('rebase descendants after split')),
    ] + cmdutil.commitopts2,
    _('hg split [--no-rebase] [[-r] REV]'),
    helpcategory=command.CATEGORY_CHANGE_MANAGEMENT, helpbasic=True)
def split(ui, repo, *revs, **opts):
    """split a changeset into smaller ones

    Repeatedly prompt changes and commit message for new changesets until there
    is nothing left in the original changeset.

    If --rev was not given, split the working directory parent.

    By default, rebase connected non-obsoleted descendants onto the new
    changeset. Use --no-rebase to avoid the rebase.
    """
    opts = pycompat.byteskwargs(opts)
    revlist = []
    if opts.get('rev'):
        revlist.append(opts.get('rev'))
    revlist.extend(revs)
    with repo.wlock(), repo.lock(), repo.transaction('split') as tr:
        revs = scmutil.revrange(repo, revlist or ['.'])
        if len(revs) > 1:
            raise error.Abort(_('cannot split multiple revisions'))

        rev = revs.first()
        ctx = repo[rev]
        if rev is None or ctx.node() == nullid:
            ui.status(_('nothing to split\n'))
            return 1
        if ctx.node() is None:
            raise error.Abort(_('cannot split working directory'))

        # rewriteutil.precheck is not very useful here because:
        # 1. null check is done above and it's more friendly to return 1
        #    instead of abort
        # 2. mergestate check is done below by cmdutil.bailifchanged
        # 3. unstable check is more complex here because of --rebase
        #
        # So only "public" check is useful and it's checked directly here.
        if ctx.phase() == phases.public:
            raise error.Abort(_('cannot split public changeset'),
                              hint=_("see 'hg help phases' for details"))

        descendants = list(repo.revs('(%d::) - (%d)', rev, rev))
        alloworphaned = obsolete.isenabled(repo, obsolete.allowunstableopt)
        if opts.get('rebase'):
            # Skip obsoleted descendants and their descendants so the rebase
            # won't cause conflicts for sure.
            torebase = list(repo.revs('%ld - (%ld & obsolete())::',
                                      descendants, descendants))
            if not alloworphaned and len(torebase) != len(descendants):
                raise error.Abort(_('split would leave orphaned changesets '
                                    'behind'))
        else:
            if not alloworphaned and descendants:
                raise error.Abort(
                    _('cannot split changeset with children without rebase'))
            torebase = ()

        if len(ctx.parents()) > 1:
            raise error.Abort(_('cannot split a merge changeset'))

        cmdutil.bailifchanged(repo)

        # Deactivate bookmark temporarily so it won't get moved unintentionally
        bname = repo._activebookmark
        if bname and repo._bookmarks[bname] != ctx.node():
            bookmarks.deactivate(repo)

        wnode = repo['.'].node()
        top = None
        try:
            top = dosplit(ui, repo, tr, ctx, opts)
        finally:
            # top is None: split failed, need update --clean recovery.
            # wnode == ctx.node(): wnode split, no need to update.
            if top is None or wnode != ctx.node():
                hg.clean(repo, wnode, show_stats=False)
            if bname:
                bookmarks.activate(repo, bname)
        if torebase and top:
            dorebase(ui, repo, torebase, top)

def dosplit(ui, repo, tr, ctx, opts):
    committed = [] # [ctx]

    # Set working parent to ctx.p1(), and keep working copy as ctx's content
    # NOTE: if we can have "update without touching working copy" API, the
    # revert step could be cheaper.
    hg.clean(repo, ctx.p1().node(), show_stats=False)
    parents = repo.changelog.parents(ctx.node())
    ui.pushbuffer()
    cmdutil.revert(ui, repo, ctx, parents)
    ui.popbuffer() # discard "reverting ..." messages

    # Any modified, added, removed, deleted result means split is incomplete
    incomplete = lambda repo: any(repo.status()[:4])

    # Main split loop
    while incomplete(repo):
        if committed:
            header = (_('HG: Splitting %s. So far it has been split into:\n')
                      % short(ctx.node()))
            for c in committed:
                firstline = c.description().split('\n', 1)[0]
                header += _('HG: - %s: %s\n') % (short(c.node()), firstline)
            header += _('HG: Write commit message for the next split '
                        'changeset.\n')
        else:
            header = _('HG: Splitting %s. Write commit message for the '
                       'first split changeset.\n') % short(ctx.node())
        opts.update({
            'edit': True,
            'interactive': True,
            'message': header + ctx.description(),
        })
        commands.commit(ui, repo, **pycompat.strkwargs(opts))
        newctx = repo['.']
        committed.append(newctx)

    if not committed:
        raise error.Abort(_('cannot split an empty revision'))

    scmutil.cleanupnodes(repo, {ctx.node(): [c.node() for c in committed]},
                         operation='split', fixphase=True)

    return committed[-1]

def dorebase(ui, repo, src, destctx):
    rebase.rebase(ui, repo, rev=[revsetlang.formatspec('%ld', src)],
                  dest=revsetlang.formatspec('%d', destctx.rev()))