Mercurial > hg
view tests/test-clone-r.t @ 37518:092eff6833a7
lfs: infer the blob store URL from paths.default
If `lfs.url` is specified, it takes precedence. However, now that we support
serving blobs via hgweb, we shouldn't *require* this setting. Less
configuration is better (things will work out of the box once this is sorted
out), and git has similar functionality.
This is not a complete solution- it isn't able to infer the blob store from an
explicitly supplied path, and it should consider `paths.default-push` for push.
The pull solution for that is a bit hacky, and this alone is an improvement for
the vast majority of cases.
Even though there are only a handful of references to the saved remote store,
the location of them makes things complicated.
1) downloading files on demand in the revlog flag processor
2) copying to readonlyvfs with bundlerepo
3) downloading in the file prefetch hook
4) the canupload()/skipdownload() checks
5) uploading blobs
Since revlog doesn't have a repo or ui reference, we can't avoid creating a
remote store when the extension is loaded. While the long term goal is to make
sure the prefetch hook is invoked early for every command for efficiency, this
handling in the flag processor is needed as a last ditch fetch.
In order to support the clone command, the remote store needs to be created
later than when the extension loads, since `paths.default` isn't set until just
before the files are checked out. Therefore, this patch changes the prefetch
hook to ignore the saved reference, and build a new one.
The canupload()/skipdownload() checks simply check if the stored instance is a
`_nullremote`. Since this can only be set via `lfs.url` (which is reflected in
the saved reference), checking only the instance created when the extension
loaded is fine.
The blob uploading function is called from several places:
1) a prepush hook
2) when writing a new bundle
3) from infinitepush
The prepush hook gets an exchange.pushop, so it has a path to where the push is
going. The bundle writer and infinitepush don't. Further, bundle creation for
things like strip and amend are causing blobs to be uploaded. This seems wrong,
but I don't want to side track this sorting that out, so punt on trying to
handle explicit push paths or `paths.default-push`.
I also think that sending blobs to a remote store when pushing to a local repo
is wrong. This functionality predates the usercache, so perhaps that's the
reason for it. I've got some patches floating around to stop sending blobs
remotely in this case, and instead write directly to the other repo's blob
store. But the tests for corruption handling weren't happy with this change,
and I don't have time to rewrite them. So exclude filesystem based paths from
this for now.
I don't think there's much of a chance to implement `paths.remote:lfsurl` style
configs, given how early these are resolved vs how late the remote store is
created. But git has it, so I threw a TODO in there, in case anyone has ideas.
I have no idea why this is now doing http auth twice when it wasn't before. I
don't think the original blobstore's url is ever being used in these cases.
| author | Matt Harbison <matt_harbison@yahoo.com> |
|---|---|
| date | Sat, 07 Apr 2018 22:22:20 -0400 |
| parents | d4e62df1c73d |
| children | 828a45233036 |
line wrap: on
line source
$ hg init test $ cd test $ echo 0 >> afile $ hg add afile $ hg commit -m "0.0" $ echo 1 >> afile $ hg commit -m "0.1" $ echo 2 >> afile $ hg commit -m "0.2" $ echo 3 >> afile $ hg commit -m "0.3" $ hg update -C 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo 1 >> afile $ hg commit -m "1.1" created new head $ echo 2 >> afile $ hg commit -m "1.2" $ echo a line > fred $ echo 3 >> afile $ hg add fred $ hg commit -m "1.3" $ hg mv afile adifferentfile $ hg commit -m "1.3m" $ hg update -C 3 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ hg mv afile anotherfile $ hg commit -m "0.3m" $ hg debugindex -f 1 afile rev flag size link p1 p2 nodeid 0 0000 2 0 -1 -1 362fef284ce2 1 0000 4 1 0 -1 125144f7e028 2 0000 6 2 1 -1 4c982badb186 3 0000 8 3 2 -1 19b1fc555737 $ hg debugindex adifferentfile rev linkrev nodeid p1 p2 0 7 2565f3199a74 000000000000 000000000000 $ hg debugindex anotherfile rev linkrev nodeid p1 p2 0 8 2565f3199a74 000000000000 000000000000 $ hg debugindex fred rev linkrev nodeid p1 p2 0 6 12ab3bcc5ea4 000000000000 000000000000 $ hg debugindex --manifest rev linkrev nodeid p1 p2 0 0 43eadb1d2d06 000000000000 000000000000 1 1 8b89697eba2c 43eadb1d2d06 000000000000 2 2 626a32663c2f 8b89697eba2c 000000000000 3 3 f54c32f13478 626a32663c2f 000000000000 4 6 de68e904d169 626a32663c2f 000000000000 5 7 09bb521d218d de68e904d169 000000000000 6 8 1fde233dfb0f f54c32f13478 000000000000 $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 9 changesets, 7 total revisions $ cd .. $ for i in 0 1 2 3 4 5 6 7 8; do > echo > echo ---- hg clone -r "$i" test test-"$i" > hg clone -r "$i" test test-"$i" > cd test-"$i" > hg verify > cd .. > done ---- hg clone -r 0 test test-0 adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets f9ee2f85a263 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 1 changesets, 1 total revisions ---- hg clone -r 1 test test-1 adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files new changesets f9ee2f85a263:34c2bf6b0626 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 2 changesets, 2 total revisions ---- hg clone -r 2 test test-2 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files new changesets f9ee2f85a263:e38ba6f5b7e0 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 3 changesets, 3 total revisions ---- hg clone -r 3 test test-3 adding changesets adding manifests adding file changes added 4 changesets with 4 changes to 1 files new changesets f9ee2f85a263:eebf5a27f8ca updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 4 changesets, 4 total revisions ---- hg clone -r 4 test test-4 adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files new changesets f9ee2f85a263:095197eb4973 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 2 changesets, 2 total revisions ---- hg clone -r 5 test test-5 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files new changesets f9ee2f85a263:1bb50a9436a7 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 3 changesets, 3 total revisions ---- hg clone -r 6 test test-6 adding changesets adding manifests adding file changes added 4 changesets with 5 changes to 2 files new changesets f9ee2f85a263:7373c1169842 updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 2 files, 4 changesets, 5 total revisions ---- hg clone -r 7 test test-7 adding changesets adding manifests adding file changes added 5 changesets with 6 changes to 3 files new changesets f9ee2f85a263:a6a34bfa0076 updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 3 files, 5 changesets, 6 total revisions ---- hg clone -r 8 test test-8 adding changesets adding manifests adding file changes added 5 changesets with 5 changes to 2 files new changesets f9ee2f85a263:aa35859c02ea updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved checking changesets checking manifests crosschecking files in changesets and manifests checking files 2 files, 5 changesets, 5 total revisions $ cd test-8 $ hg pull ../test-7 pulling from ../test-7 searching for changes adding changesets adding manifests adding file changes added 4 changesets with 2 changes to 3 files (+1 heads) new changesets 095197eb4973:a6a34bfa0076 (run 'hg heads' to see heads, 'hg merge' to merge) $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 9 changesets, 7 total revisions $ cd .. $ hg clone test test-9 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd test-9 $ hg branch foobar marked working directory as branch foobar (branches are permanent and global, did you want a bookmark?) $ echo file2 >> file2 $ hg add file2 $ hg commit -m "changeset9" $ echo file3 >> file3 $ hg add file3 $ hg commit -m "changeset10" $ cd .. $ hg clone -r 9 -u foobar test-9 test-10 adding changesets adding manifests adding file changes added 6 changesets with 6 changes to 3 files new changesets f9ee2f85a263:7100abb79635 updating to branch foobar 2 files updated, 0 files merged, 0 files removed, 0 files unresolved