view tests/test-hardlinks.t @ 37518:092eff6833a7

lfs: infer the blob store URL from paths.default

If `lfs.url` is specified, it takes precedence.  However, now that we support
serving blobs via hgweb, we shouldn't *require* this setting.  Less
configuration is better (things will work out of the box once this is sorted
out), and git has similar functionality.

This is not a complete solution- it isn't able to infer the blob store from an
explicitly supplied path, and it should consider `paths.default-push` for push.
The pull solution for that is a bit hacky, and this alone is an improvement for
the vast majority of cases.

Even though there are only a handful of references to the saved remote store,
the location of them makes things complicated.

  1) downloading files on demand in the revlog flag processor
  2) copying to readonlyvfs with bundlerepo
  3) downloading in the file prefetch hook
  4) the canupload()/skipdownload() checks
  5) uploading blobs

Since revlog doesn't have a repo or ui reference, we can't avoid creating a
remote store when the extension is loaded.  While the long term goal is to make
sure the prefetch hook is invoked early for every command for efficiency, this
handling in the flag processor is needed as a last ditch fetch.

In order to support the clone command, the remote store needs to be created
later than when the extension loads, since `paths.default` isn't set until just
before the files are checked out.  Therefore, this patch changes the prefetch
hook to ignore the saved reference, and build a new one.

The canupload()/skipdownload() checks simply check if the stored instance is a
`_nullremote`.  Since this can only be set via `lfs.url` (which is reflected in
the saved reference), checking only the instance created when the extension
loaded is fine.

The blob uploading function is called from several places:

  1) a prepush hook
  2) when writing a new bundle
  3) from infinitepush

The prepush hook gets an exchange.pushop, so it has a path to where the push is
going.  The bundle writer and infinitepush don't.  Further, bundle creation for
things like strip and amend are causing blobs to be uploaded.  This seems wrong,
but I don't want to side track this sorting that out, so punt on trying to
handle explicit push paths or `paths.default-push`.

I also think that sending blobs to a remote store when pushing to a local repo
is wrong.  This functionality predates the usercache, so perhaps that's the
reason for it.  I've got some patches floating around to stop sending blobs
remotely in this case, and instead write directly to the other repo's blob
store.  But the tests for corruption handling weren't happy with this change,
and I don't have time to rewrite them.  So exclude filesystem based paths from
this for now.

I don't think there's much of a chance to implement `paths.remote:lfsurl` style
configs, given how early these are resolved vs how late the remote store is
created.  But git has it, so I threw a TODO in there, in case anyone has ideas.

I have no idea why this is now doing http auth twice when it wasn't before.  I
don't think the original blobstore's url is ever being used in these cases.

#require hardlink reporevlogstore

  $ cat > nlinks.py <<EOF
  > from __future__ import print_function
  > import sys
  > from mercurial import util
  > for f in sorted(sys.stdin.readlines()):
  >     f = f[:-1]
  >     print(util.nlinks(f), f)
  > EOF

  $ nlinksdir()
  > {
  >     find "$@" -type f | $PYTHON $TESTTMP/nlinks.py
  > }

Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):

  $ cat > linkcp.py <<EOF
  > from __future__ import absolute_import
  > import sys
  > from mercurial import util
  > util.copyfiles(sys.argv[1], sys.argv[2], hardlink=True)
  > EOF

  $ linkcp()
  > {
  >     $PYTHON $TESTTMP/linkcp.py $1 $2
  > }

Prepare repo r1:

  $ hg init r1
  $ cd r1

  $ echo c1 > f1
  $ hg add f1
  $ hg ci -m0

  $ mkdir d1
  $ cd d1
  $ echo c2 > f2
  $ hg add f2
  $ hg ci -m1
  $ cd ../..

  $ nlinksdir r1/.hg/store
  1 r1/.hg/store/00changelog.i
  1 r1/.hg/store/00manifest.i
  1 r1/.hg/store/data/d1/f2.i
  1 r1/.hg/store/data/f1.i
  1 r1/.hg/store/fncache (repofncache !)
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache (repofncache !)
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots


Create hardlinked clone r2:

  $ hg clone -U --debug r1 r2 --config progress.debug=true
  linking: 1
  linking: 2
  linking: 3
  linking: 4
  linking: 5
  linking: 6
  linking: 7
  linked 7 files

Create non-hardlinked clone r3:

  $ hg clone --pull r1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 40d85e9847f2:7069c422939c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved


Repos r1 and r2 should now contain hardlinked files:

  $ nlinksdir r1/.hg/store
  2 r1/.hg/store/00changelog.i
  2 r1/.hg/store/00manifest.i
  2 r1/.hg/store/data/d1/f2.i
  2 r1/.hg/store/data/f1.i
  2 r1/.hg/store/fncache (repofncache !)
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache (repofncache !)
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots

  $ nlinksdir r2/.hg/store
  2 r2/.hg/store/00changelog.i
  2 r2/.hg/store/00manifest.i
  2 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  2 r2/.hg/store/fncache (repofncache !)

Repo r3 should not be hardlinked:

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache (repofncache !)
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots


Create a non-inlined filelog in r3:

  $ cd r3/d1
  >>> f = open('data1', 'wb')
  >>> for x in range(10000):
  ...     f.write("%s\n" % str(x))
  >>> f.close()
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> f2
  >   hg commit -m$j
  > done
  $ cd ../..

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.d
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache (repofncache !)
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backup.fncache (repofncache !)
  1 r3/.hg/store/undo.backup.phaseroots
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots

Push to repo r1 should break up most hardlinks in r2:

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd r3
  $ hg push
  pushing to $TESTTMP/r1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 10 changesets with 10 changes to 1 files

  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re) (repofncache !)

#if hardlink-whitelisted repofncache
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions


  $ cd r1
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Committing a change to f1 in r1 must break up hardlink f1.i in r2:

  $ echo c1c1 >> f1
  $ hg ci -m00
  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  1 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re) (repofncache !)

#if hardlink-whitelisted repofncache
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

Create a file which exec permissions we will change
  $ cd r3
  $ echo "echo hello world" > f3
  $ hg add f3
  $ hg ci -mf3
  $ cd ..

  $ cd r3
  $ hg tip --template '{rev}:{node|short}\n'
  12:d3b77733a28a
  $ echo bla > f1
  $ chmod +x f3
  $ hg ci -m1
  $ cd ..

Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):

  $ linkcp r3 r4

'checklink' is produced by hardlinking a symlink, which is undefined whether
the symlink should be followed or not. It does behave differently on Linux and
BSD. Just remove it so the test pass on both platforms.

  $ rm -f r4/.hg/cache/checklink

r4 has hardlinks in the working dir (not just inside .hg):

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  2 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  ? r4/.hg/cache/checklink-target (glob) (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  2 r4/.hg/dirstate
  2 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache (repofncache !)
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache (repofncache !)
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  2 r4/f1
  2 r4/f3

Update back to revision 12 in r4 should break hardlink of file f1 and f3:
#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif


  $ hg -R r4 up 12
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved (execbit !)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved (no-execbit !)

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  1 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  2 r4/.hg/cache/checklink-target (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  1 r4/.hg/dirstate
  1 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache (repofncache !)
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  1 r4/f1
  1 r4/f3 (execbit !)
  2 r4/f3 (no-execbit !)

#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif

Test hardlinking outside hg:

  $ mkdir x
  $ echo foo > x/a

  $ linkcp x y
  $ echo bar >> y/a

No diff if hardlink:

  $ diff x/a y/a

Test mq hardlinking:

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init a
  $ cd a

  $ hg qimport -n foo - << EOF
  > # HG changeset patch
  > # Date 1 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/a	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +a
  > EOF
  adding foo to series file

  $ hg qpush
  applying foo
  now at: foo

  $ cd ..
  $ linkcp a b
  $ cd b

  $ hg qimport -n bar - << EOF
  > # HG changeset patch
  > # Date 2 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/b	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +b
  > EOF
  adding bar to series file

  $ hg qpush
  applying bar
  now at: bar

  $ cat .hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar

  $ cat .hg/patches/series
  foo
  bar

  $ cat ../a/.hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo

  $ cat ../a/.hg/patches/series
  foo

Test tags hardlinking:

  $ hg qdel -r qbase:qtip
  patch foo finalized without changeset message
  patch bar finalized without changeset message

  $ hg tag -l lfoo
  $ hg tag foo

  $ cd ..
  $ linkcp b c
  $ cd c

  $ hg tag -l -r 0 lbar
  $ hg tag -r 0 bar

  $ cat .hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
  430ed4828a74fa4047bc816a25500f7472ab4bfe bar

  $ cat .hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
  430ed4828a74fa4047bc816a25500f7472ab4bfe lbar

  $ cat ../b/.hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo

  $ cat ../b/.hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo

  $ cd ..