view tests/test-remove.t @ 37518:092eff6833a7

lfs: infer the blob store URL from paths.default

If `lfs.url` is specified, it takes precedence.  However, now that we support
serving blobs via hgweb, we shouldn't *require* this setting.  Less
configuration is better (things will work out of the box once this is sorted
out), and git has similar functionality.

This is not a complete solution- it isn't able to infer the blob store from an
explicitly supplied path, and it should consider `paths.default-push` for push.
The pull solution for that is a bit hacky, and this alone is an improvement for
the vast majority of cases.

Even though there are only a handful of references to the saved remote store,
the location of them makes things complicated.

  1) downloading files on demand in the revlog flag processor
  2) copying to readonlyvfs with bundlerepo
  3) downloading in the file prefetch hook
  4) the canupload()/skipdownload() checks
  5) uploading blobs

Since revlog doesn't have a repo or ui reference, we can't avoid creating a
remote store when the extension is loaded.  While the long term goal is to make
sure the prefetch hook is invoked early for every command for efficiency, this
handling in the flag processor is needed as a last ditch fetch.

In order to support the clone command, the remote store needs to be created
later than when the extension loads, since `paths.default` isn't set until just
before the files are checked out.  Therefore, this patch changes the prefetch
hook to ignore the saved reference, and build a new one.

The canupload()/skipdownload() checks simply check if the stored instance is a
`_nullremote`.  Since this can only be set via `lfs.url` (which is reflected in
the saved reference), checking only the instance created when the extension
loaded is fine.

The blob uploading function is called from several places:

  1) a prepush hook
  2) when writing a new bundle
  3) from infinitepush

The prepush hook gets an exchange.pushop, so it has a path to where the push is
going.  The bundle writer and infinitepush don't.  Further, bundle creation for
things like strip and amend are causing blobs to be uploaded.  This seems wrong,
but I don't want to side track this sorting that out, so punt on trying to
handle explicit push paths or `paths.default-push`.

I also think that sending blobs to a remote store when pushing to a local repo
is wrong.  This functionality predates the usercache, so perhaps that's the
reason for it.  I've got some patches floating around to stop sending blobs
remotely in this case, and instead write directly to the other repo's blob
store.  But the tests for corruption handling weren't happy with this change,
and I don't have time to rewrite them.  So exclude filesystem based paths from
this for now.

I don't think there's much of a chance to implement `paths.remote:lfsurl` style
configs, given how early these are resolved vs how late the remote store is
created.  But git has it, so I threw a TODO in there, in case anyone has ideas.

I have no idea why this is now doing http auth twice when it wasn't before.  I
don't think the original blobstore's url is ever being used in these cases.

  $ remove() {
  >     hg rm $@
  >     echo "exit code: $?"
  >     hg st
  >     # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
  >     find . -name .hg -prune -o -type f -print | sort
  >     hg up -C
  > }

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > disable=False
  > assume-tty = 1
  > delay = 0
  > # set changedelay really large so we don't see nested topics
  > changedelay = 30000
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg init a
  $ cd a
  $ echo a > foo

file not managed

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is untracked
  exit code: 1
  ? foo
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg add foo
  $ hg commit -m1

the table cases
00 state added, options none

  $ echo b > bar
  $ hg add bar
  $ remove bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file has been marked for add (use 'hg forget' to undo add)
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

01 state clean, options none

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

02 state modified, options none

  $ echo b >> foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is modified (use -f to force removal)
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

03 state missing, options none

  $ rm foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

10 state added, options -f

  $ echo b > bar
  $ hg add bar
  $ remove -f bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

11 state clean, options -f

  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

12 state modified, options -f

  $ echo b >> foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

13 state missing, options -f

  $ rm foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

20 state added, options -A

  $ echo b > bar
  $ hg add bar
  $ remove -A bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file still exists
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

21 state clean, options -Av

  $ remove -Av foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

22 state modified, options -Av

  $ echo b >> foo
  $ remove -Av foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

23 state missing, options -A

  $ rm foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

30 state added, options -Af

  $ echo b > bar
  $ hg add bar
  $ remove -Af bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

31 state clean, options -Af

  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

32 state modified, options -Af

  $ echo b >> foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

33 state missing, options -Af

  $ rm foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

test some directory stuff

  $ mkdir test
  $ echo a > test/foo
  $ echo b > test/bar
  $ hg ci -Am2
  adding test/bar
  adding test/foo

dir, options none

  $ rm test/bar
  $ remove test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -f

  $ rm test/bar
  $ remove -f test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Av

  $ rm test/bar
  $ remove -Av test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  not removing test/foo: file still exists
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -A <dir>
  $ rm test/bar
  $ remove -A test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

without any files/dirs, options -A
  $ rm test/bar
  $ remove -A
  \r (no-eol) (esc)
  skipping [=====================>                      ] 1/2\r (no-eol) (esc)
  skipping [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Af

  $ rm test/bar
  $ remove -Af test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar
  removing test/foo
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

test remove dropping empty trees (issue1861)

  $ mkdir -p issue1861/b/c
  $ echo x > issue1861/x
  $ echo y > issue1861/b/c/y
  $ hg ci -Am add
  adding issue1861/b/c/y
  adding issue1861/x
  $ hg rm issue1861/b
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing issue1861/b/c/y
  $ hg ci -m remove
  $ ls issue1861
  x

test that commit does not crash if the user removes a newly added file

  $ touch f1
  $ hg add f1
  $ rm f1
  $ hg ci -A -mx
  removing f1
  nothing changed
  [1]

handling of untracked directories and missing files

  $ mkdir d1
  $ echo a > d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing d1: no tracked files
  [1]
  $ hg add d1/a
  $ rm d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing d1/a

  $ hg rm --after nosuch
  nosuch: * (glob)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  [1]

test dry-run for remove

  $ hg init testdryrun
  $ cd testdryrun
  $ echo a>a
  $ hg ci -qAm1
  $ hg remove a -nv
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing a
  $ hg diff

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > largefiles=
  > EOF
  $ echo 'B as largefile' > B
  $ hg add --large B
  $ hg ci -m "B"
  $ hg remove B -nv
  removing B
  $ hg st

  $ cd ..