merge: store ACTION_KEEP_ABSENT when we are keeping the file absent locally
If a file is not present on the local side, and it's unchanged between other
merge parent and ancestor, we don't use any action, neither we had a if-else
branch for that condition. This leads to bid-merge missing that there is a
such action possible which can be performed.
As test changes demonstrate, we now choose the locally deleted side instead
of choosing the remote one consistently. This is also wrong behavior which is
resulted because of missing possible action. It will be fixed in next patch.
This whole logic is not acurrate as we should prompt user on what to do
when this kind of criss-cross merge is in play.
Differential Revision: https://phab.mercurial-scm.org/D8940
$ hg init ignorerepo
$ cd ignorerepo
debugignore with no hgignore should be deterministic:
$ hg debugignore
<nevermatcher>
Issue562: .hgignore requires newline at end:
$ touch foo
$ touch bar
$ touch baz
$ cat > makeignore.py <<EOF
> f = open(".hgignore", "w")
> f.write("ignore\n")
> f.write("foo\n")
> # No EOL here
> f.write("bar")
> f.close()
> EOF
$ "$PYTHON" makeignore.py
Should display baz only:
$ hg status
? baz
$ rm foo bar baz .hgignore makeignore.py
$ touch a.o
$ touch a.c
$ touch syntax
$ mkdir dir
$ touch dir/a.o
$ touch dir/b.o
$ touch dir/c.o
$ hg add dir/a.o
$ hg commit -m 0
$ hg add dir/b.o
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
$ echo "*.o" > .hgignore
$ hg status
abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
[255]
Ensure given files are relative to cwd
$ echo "dir/.*\.o" > .hgignore
$ hg status -i
I dir/c.o
$ hg debugignore dir/c.o dir/missing.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
dir/missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
$ cd dir
$ hg debugignore c.o missing.o
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
For icasefs, inexact matches also work, except for missing files
#if icasefs
$ hg debugignore c.O missing.O
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.O is not ignored
#endif
$ cd ..
$ echo ".*\.o" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
Ensure that comments work:
$ touch 'foo#bar' 'quux#' 'quu0#'
#if no-windows
$ touch 'baz\' 'baz\wat' 'ba0\#wat' 'ba1\\' 'ba1\\wat' 'quu0\'
#endif
$ cat <<'EOF' >> .hgignore
> # full-line comment
> # whitespace-only comment line
> syntax# pattern, no whitespace, then comment
> a.c # pattern, then whitespace, then comment
> baz\\# # (escaped) backslash, then comment
> ba0\\\#w # (escaped) backslash, escaped comment character, then comment
> ba1\\\\# # (escaped) backslashes, then comment
> foo\#b # escaped comment character
> quux\## escaped comment character at end of name
> EOF
$ hg status
A dir/b.o
? .hgignore
? quu0#
? quu0\ (no-windows !)
$ cat <<'EOF' > .hgignore
> .*\.o
> syntax: glob
> syntax# pattern, no whitespace, then comment
> a.c # pattern, then whitespace, then comment
> baz\\#* # (escaped) backslash, then comment
> ba0\\\#w* # (escaped) backslash, escaped comment character, then comment
> ba1\\\\#* # (escaped) backslashes, then comment
> foo\#b* # escaped comment character
> quux\## escaped comment character at end of name
> quu0[\#]# escaped comment character inside [...]
> EOF
$ hg status
A dir/b.o
? .hgignore
? ba1\\wat (no-windows !)
? baz\wat (no-windows !)
? quu0\ (no-windows !)
$ rm 'foo#bar' 'quux#' 'quu0#'
#if no-windows
$ rm 'baz\' 'baz\wat' 'ba0\#wat' 'ba1\\' 'ba1\\wat' 'quu0\'
#endif
Check that '^\.' does not ignore the root directory:
$ echo "^\." > .hgignore
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
Test that patterns from ui.ignore options are read:
$ echo > .hgignore
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
> EOF
$ echo "glob:**.o" > .hg/testhgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
empty out testhgignore
$ echo > .hg/testhgignore
Test relative ignore path (issue4473):
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.relative = .hg/testhgignorerel
> EOF
$ echo "glob:*.o" > .hg/testhgignorerel
$ cd dir
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ hg debugignore
<includematcher includes='.*\\.o(?:/|$)'>
$ cd ..
$ echo > .hg/testhgignorerel
$ echo "syntax: glob" > .hgignore
$ echo "re:.*\.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "syntax: invalid" > .hgignore
$ hg status
$TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
? syntax
$ echo "syntax: glob" > .hgignore
$ echo "*.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "relglob:syntax*" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
$ echo "relglob:*" > .hgignore
$ hg status
A dir/b.o
$ cd dir
$ hg status .
A b.o
$ hg debugignore
<includematcher includes='.*(?:/|$)'>
$ hg debugignore b.o
b.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)
$ cd ..
Check patterns that match only the directory
"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.
$ echo "^dir\$" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o (fsmonitor !)
? syntax
Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)
$ echo "syntax: glob" > .hgignore
$ echo "dir/**/c.o" >> .hgignore
$ touch dir/c.o
$ mkdir dir/subdir
$ touch dir/subdir/c.o
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? syntax
$ hg debugignore a.c
a.c is not ignored
$ hg debugignore dir/c.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)
Check rooted globs
$ hg purge --all --config extensions.purge=
$ echo "syntax: rootglob" > .hgignore
$ echo "a/*.ext" >> .hgignore
$ for p in a b/a aa; do mkdir -p $p; touch $p/b.ext; done
$ hg status -A 'set:**.ext'
? aa/b.ext
? b/a/b.ext
I a/b.ext
Check using 'include:' in ignore file
$ hg purge --all --config extensions.purge=
$ touch foo.included
$ echo ".*.included" > otherignore
$ hg status -I "include:otherignore"
? foo.included
$ echo "include:otherignore" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? otherignore
Check recursive uses of 'include:'
$ echo "include:nested/ignore" >> otherignore
$ mkdir nested nested/more
$ echo "glob:*ignore" > nested/ignore
$ echo "rootglob:a" >> nested/ignore
$ touch a nested/a nested/more/a
$ hg status
A dir/b.o
? nested/a
? nested/more/a
$ rm a nested/a nested/more/a
$ cp otherignore goodignore
$ echo "include:badignore" >> otherignore
$ hg status
skipping unreadable pattern file 'badignore': $ENOENT$
A dir/b.o
$ mv goodignore otherignore
Check using 'include:' while in a non-root directory
$ cd ..
$ hg -R ignorerepo status
A dir/b.o
$ cd ignorerepo
Check including subincludes
$ hg revert -q --all
$ hg purge --all --config extensions.purge=
$ echo ".hgignore" > .hgignore
$ mkdir dir1 dir2
$ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
$ echo "subinclude:dir2/.hgignore" >> .hgignore
$ echo "glob:file*2" > dir2/.hgignore
$ hg status
? dir1/file1
? dir1/file2
? dir2/file1
Check including subincludes with other patterns
$ echo "subinclude:dir1/.hgignore" >> .hgignore
$ mkdir dir1/subdir
$ touch dir1/subdir/file1
$ echo "rootglob:f?le1" > dir1/.hgignore
$ hg status
? dir1/file2
? dir1/subdir/file1
? dir2/file1
$ rm dir1/subdir/file1
$ echo "regexp:f.le1" > dir1/.hgignore
$ hg status
? dir1/file2
? dir2/file1
Check multiple levels of sub-ignores
$ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
$ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
$ echo "glob:subfil*3" >> dir1/subdir/.hgignore
$ hg status
? dir1/file2
? dir1/subdir/subfile4
? dir2/file1
Check include subignore at the same level
$ mv dir1/subdir/.hgignore dir1/.hgignoretwo
$ echo "regexp:f.le1" > dir1/.hgignore
$ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
$ echo "glob:file*2" > dir1/.hgignoretwo
$ hg status | grep file2
[1]
$ hg debugignore dir1/file2
dir1/file2 is ignored
(ignore rule in dir2/.hgignore, line 1: 'file*2')
#if windows
Windows paths are accepted on input
$ rm dir1/.hgignore
$ echo "dir1/file*" >> .hgignore
$ hg debugignore "dir1\file2"
dir1/file2 is ignored
(ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
$ hg up -qC .
#endif