view tests/test-convert-svn-branches.t @ 21934:0cb34b3991f8 stable

largefiles: use "normallookup" on "lfdirstate" while reverting

Before this patch, largefiles gotten from revisions other than the
parent of the working directory at "hg revert" become "clean"
unexpectedly in steps below:

    1. "repo.status()" is invoked (for status check before reverting)
      1-1 "dirstate" entry for standinfile SF is "normal"-ed
     (1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed)

    2. "cmdutil.revert()" is invoked
      2-1 standinfile SF is updated in the working directory
      2-2 "dirstate" entry for SF is NOT updated

    3. "lfcommands.updatelfiles()" is invoked (by "overrides.overriderevert()")
      3-1 largefile LF (for SF) is updated in the working directory
      3-2 "dirstate" returns "n" and valid timestamp for SF (by 1-1 and 2-2)
      3-3 "lfdirstate" entry for LF is "normal"-ed
      3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
          timestamp of LF is stored into "lfdirstate" file (by 3-3)
          (ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)

Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 3-3 and 3-4) as "clean".

When largefiles are reverted, they should be "normallookup"-ed
forcibly.

This patch uses "normallookup" on "lfdirstate" while reverting, by
passing "True" to newly added argument "normallookup".

Forcible "normallookup"-ing is not so expensive, because list of
target largefiles is explicitly specified in this case.

This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate" (for ASSUMPTION at 3-4)

  $ "$TESTDIR/hghave" svn svn-bindings || exit 80

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/branches.svndump"

Convert trunk and branches

  $ cat > branchmap <<EOF
  > old3 newbranch
  > 
  > 
  > EOF
  $ hg convert --branchmap=branchmap --datesort -r 10 svn-repo A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  10 init projA
  9 hello
  8 branch trunk, remove c and dir
  7 change a
  6 change b
  5 move and update c
  4 move and update c
  3 change b again
  2 move to old2
  1 move back to old
  0 last change to a

Test template keywords

  $ hg -R A-hg log --template '{rev} {svnuuid}{svnpath}@{svnrev}\n'
  10 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@10
  9 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@9
  8 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old2@8
  7 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@7
  6 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@6
  5 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@6
  4 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@5
  3 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@4
  2 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@3
  1 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@2
  0 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@1

Convert again

  $ hg convert --branchmap=branchmap --datesort svn-repo A-hg
  scanning source...
  sorting...
  converting...
  0 branch trunk@1 into old3

  $ cd A-hg
  $ hg log -G --template 'branch={branches} {rev} {desc|firstline} files: {files}\n'
  o  branch=newbranch 11 branch trunk@1 into old3 files:
  |
  | o  branch= 10 last change to a files: a
  | |
  | | o  branch=old 9 move back to old files:
  | | |
  | | o  branch=old2 8 move to old2 files:
  | | |
  | | o  branch=old 7 change b again files: b
  | | |
  | o |  branch= 6 move and update c files: b
  | | |
  | | o  branch=old 5 move and update c files: c
  | | |
  | | o  branch=old 4 change b files: b
  | | |
  | o |  branch= 3 change a files: a
  | | |
  | | o  branch=old 2 branch trunk, remove c and dir files: c
  | |/
  | o  branch= 1 hello files: a b c dir/e
  |/
  o  branch= 0 init projA files:
  

  $ hg branches
  newbranch                     11:a6d7cc050ad1
  default                       10:6e2b33404495
  old                            9:93c4b0f99529
  old2                           8:b52884d7bead (inactive)
  $ hg tags -q
  tip
  $ cd ..

Test hg failing to call itself

  $ HG=foobar hg convert svn-repo B-hg 2>&1 | grep abort
  abort: Mercurial failed to run itself, check hg executable is in PATH

Convert 'trunk' to branch other than 'default'

  $ cat > branchmap <<EOF
  > None hgtrunk
  > 
  > 
  > EOF
  $ hg convert --branchmap=branchmap --datesort -r 10 svn-repo C-hg
  initializing destination C-hg repository
  scanning source...
  sorting...
  converting...
  10 init projA
  9 hello
  8 branch trunk, remove c and dir
  7 change a
  6 change b
  5 move and update c
  4 move and update c
  3 change b again
  2 move to old2
  1 move back to old
  0 last change to a

  $ cd C-hg
  $ hg branches
  hgtrunk                       10:745f063703b4
  old                            9:aa50d7b8d922
  old2                           8:c85a22267b6e (inactive)
  $ cd ..