Mercurial > hg
view tests/test-http.t @ 21934:0cb34b3991f8 stable
largefiles: use "normallookup" on "lfdirstate" while reverting
Before this patch, largefiles gotten from revisions other than the
parent of the working directory at "hg revert" become "clean"
unexpectedly in steps below:
1. "repo.status()" is invoked (for status check before reverting)
1-1 "dirstate" entry for standinfile SF is "normal"-ed
(1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed)
2. "cmdutil.revert()" is invoked
2-1 standinfile SF is updated in the working directory
2-2 "dirstate" entry for SF is NOT updated
3. "lfcommands.updatelfiles()" is invoked (by "overrides.overriderevert()")
3-1 largefile LF (for SF) is updated in the working directory
3-2 "dirstate" returns "n" and valid timestamp for SF (by 1-1 and 2-2)
3-3 "lfdirstate" entry for LF is "normal"-ed
3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file (by 3-3)
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 3-3 and 3-4) as "clean".
When largefiles are reverted, they should be "normallookup"-ed
forcibly.
This patch uses "normallookup" on "lfdirstate" while reverting, by
passing "True" to newly added argument "normallookup".
Forcible "normallookup"-ing is not so expensive, because list of
target largefiles is explicitly specified in this case.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate" (for ASSUMPTION at 3-4)
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Wed, 23 Jul 2014 00:10:24 +0900 |
parents | 63659b809021 |
children | 9fcf772f15ff |
line wrap: on
line source
$ "$TESTDIR/hghave" serve || exit 80 $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused #if windows $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': * (glob) [255] #else $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': Address already in use [255] #endif $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions try to clone via stream, should use pull instead $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2 requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ echo '[hooks]' >> .hg/hgrc $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/ (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ cat << EOT > userpass.py > import base64 > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > auth = req.env.get('HTTP_AUTHORIZATION') > if not auth: > raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who', > [('WWW-Authenticate', 'Basic Realm="mercurial"')]) > if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']: > raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no') > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOT $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \ > --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF #if python243 $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 #endif $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 #if python243 $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest tag -r tip top $ hg -R dest push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ cut -c38- ../access.log "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=stream_out HTTP/1.1" 401 - "GET /?cmd=stream_out HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks #endif $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] check error log $ cat error.log