copies: add config option for writing copy metadata to file and/or changset
This introduces a config option that lets you choose to write copy
metadata to the changeset extras instead of to filelog. There's also
an option to write it to both places. I imagine that may possibly be
useful when transitioning an existing repo.
The copy metadata is stored as two fields in extras: one for copies
since p1 and one for copies since p2.
I may need to add more information later in order to make copy tracing
faster. Specifically, I'm thinking out recording which files were
added or removed so that copies._chaincopies() doesn't have to look at
the manifest for that. But that would just be an optimization and that
can be added once we know if it's necessary.
I have also considered saving space by using replacing the destination
file path by an index into the "files" list, but that can also be
changed later (but before the feature is ready to release).
Differential Revision: https://phab.mercurial-scm.org/D6183
Tests discovery against servers without getbundle support:
$ cat >> $HGRCPATH <<EOF
> [ui]
> logtemplate="{rev} {node|short}: {desc} {branches}\n"
> EOF
$ cp $HGRCPATH $HGRCPATH-withcap
$ CAP="getbundle known changegroupsubset bundle2"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap
$ cp $HGRCPATH-withcap $HGRCPATH
Prep for test server without branchmap support
$ CAP="branchmap"
$ . "$TESTDIR/notcapable"
$ cp $HGRCPATH $HGRCPATH-nocap-branchmap
$ cp $HGRCPATH-withcap $HGRCPATH
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> cp $HGRCPATH-nocap $HGRCPATH
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> cp $HGRCPATH-withcap $HGRCPATH
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
new changesets d57206cc072a:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ cp $HGRCPATH-withcap $HGRCPATH
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cp $HGRCPATH-nocap $HGRCPATH
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets a7892891da29:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Remote is empty:
$ tstop ; tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is superset:
$ tstop
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1!
(use 'hg push --new-branch' to create new remote branches)
[255]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Partial pull:
$ tstop ; tstart main
$ hg clone $remote partial --rev name2
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ hg init partial; cd partial
$ hg incoming $remote --rev name2
comparing with http://localhost:$HGPORT/
abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability!
[255]
$ hg pull $remote --rev name2
pulling from http://localhost:$HGPORT/
abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
[255]
$ cd ..
$ tstop
Exercise pushing to server without branchmap capability
$ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
$ hg init rlocal
$ cd rlocal
$ echo A > A
$ hg ci -Am A
adding A
$ cd ..
$ hg clone rlocal rremote
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd rlocal
$ echo B > B
$ hg ci -Am B
adding B
$ cd ..
$ tstart rremote
$ cd rlocal
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
1 27547f69f254: B
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
1 local changesets published
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop