view tests/test-subrepo-recursion.t @ 18792:10669e24eb6c

completion: add a debugpathcomplete command

The bash_completion code uses "hg status" to generate a list of
possible completions for commands that operate on files in the
working directory. In a large working directory, this can result
in a single tab-completion being very slow (several seconds) as a
result of checking the status of every file, even when there is no
need to check status or no possible matches.

The new debugpathcomplete command gains performance in a few simple
ways:

* Allow completion to operate on just a single directory. When used
  to complete the right commands, this considerably reduces the
  number of completions returned, at no loss in functionality.

* Never check the status of files. For completions that really must
  know if a file is modified, it is faster to use status:

  hg status -nm 'glob:myprefix**'

Performance:

Here are the commands used by bash_completion to complete, run in
the root of the mozilla-central working dir (~77,000 files) and
another repo (~165,000 files):

All "normal state" files (used by e.g. remove, revert):

                            mozilla    other
  status -nmcd 'glob:**'       1.77     4.10 sec
  debugpathcomplete -f -n      0.53     1.26
  debugpathcomplete -n         0.17     0.41

("-f" means "complete full paths", rather than the current directory)

Tracked files matching "a":

                            mozilla    other
  status -nmcd 'glob:a**'      0.26     0.47
  debugpathcomplete -f -n a    0.10     0.24
  debugpathcomplete -n a       0.10     0.22

We should be able to further improve completion performance once
the critbit work lands. Right now, our performance is limited by
the need to iterate over all keys in the dirstate.

Create test repository:

  $ hg init repo
  $ cd repo
  $ echo x1 > x.txt

  $ hg init foo
  $ cd foo
  $ echo y1 > y.txt

  $ hg init bar
  $ cd bar
  $ echo z1 > z.txt

  $ cd ..
  $ echo 'bar = bar' > .hgsub

  $ cd ..
  $ echo 'foo = foo' > .hgsub

Add files --- .hgsub files must go first to trigger subrepos:

  $ hg add -S .hgsub
  $ hg add -S foo/.hgsub
  $ hg add -S foo/bar
  adding foo/bar/z.txt (glob)
  $ hg add -S
  adding x.txt
  adding foo/y.txt (glob)

Test recursive status without committing anything:

  $ hg status -S
  A .hgsub
  A foo/.hgsub
  A foo/bar/z.txt
  A foo/y.txt
  A x.txt

Test recursive diff without committing anything:

  $ hg diff --nodates -S foo
  diff -r 000000000000 foo/.hgsub
  --- /dev/null
  +++ b/foo/.hgsub
  @@ -0,0 +1,1 @@
  +bar = bar
  diff -r 000000000000 foo/y.txt
  --- /dev/null
  +++ b/foo/y.txt
  @@ -0,0 +1,1 @@
  +y1
  diff -r 000000000000 foo/bar/z.txt
  --- /dev/null
  +++ b/foo/bar/z.txt
  @@ -0,0 +1,1 @@
  +z1

Commits:

  $ hg commit -m fails
  abort: uncommitted changes in subrepo foo
  (use --subrepos for recursive commit)
  [255]

The --subrepos flag overwrite the config setting:

  $ hg commit -m 0-0-0 --config ui.commitsubrepos=No --subrepos
  committing subrepository foo
  committing subrepository foo/bar (glob)

  $ cd foo
  $ echo y2 >> y.txt
  $ hg commit -m 0-1-0

  $ cd bar
  $ echo z2 >> z.txt
  $ hg commit -m 0-1-1

  $ cd ..
  $ hg commit -m 0-2-1

  $ cd ..
  $ hg commit -m 1-2-1

Change working directory:

  $ echo y3 >> foo/y.txt
  $ echo z3 >> foo/bar/z.txt
  $ hg status -S
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status call crossing repository boundaries:

  $ hg status -S foo/bar/z.txt
  M foo/bar/z.txt
  $ hg status -S -I 'foo/?.txt'
  M foo/y.txt
  $ hg status -S -I '**/?.txt'
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S -I '**/?.txt'
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status from within a subdirectory:

  $ mkdir dir
  $ cd dir
  $ echo a1 > a.txt
  $ hg status -S
  M foo/bar/z.txt
  M foo/y.txt
  ? dir/a.txt
  $ hg diff --nodates -S
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status with relative path:

  $ hg status -S ..
  M ../foo/bar/z.txt
  M ../foo/y.txt
  ? a.txt
  $ hg diff --nodates -S ..
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3
  $ cd ..

Cleanup and final commit:

  $ rm -r dir
  $ hg commit --subrepos -m 2-3-2
  committing subrepository foo
  committing subrepository foo/bar (glob)

Test explicit path commands within subrepos: add/forget
  $ echo z1 > foo/bar/z2.txt
  $ hg status -S
  ? foo/bar/z2.txt
  $ hg add foo/bar/z2.txt
  $ hg status -S
  A foo/bar/z2.txt
  $ hg forget foo/bar/z2.txt
  $ hg status -S
  ? foo/bar/z2.txt
  $ hg forget foo/bar/z2.txt
  not removing foo/bar/z2.txt: file is already untracked (glob)
  [1]
  $ hg status -S
  ? foo/bar/z2.txt
  $ rm foo/bar/z2.txt

Log with the relationships between repo and its subrepo:

  $ hg log --template '{rev}:{node|short} {desc}\n'
  2:1326fa26d0c0 2-3-2
  1:4b3c9ff4f66b 1-2-1
  0:23376cbba0d8 0-0-0

  $ hg -R foo log --template '{rev}:{node|short} {desc}\n'
  3:65903cebad86 2-3-2
  2:d254738c5f5e 0-2-1
  1:8629ce7dcc39 0-1-0
  0:af048e97ade2 0-0-0

  $ hg -R foo/bar log --template '{rev}:{node|short} {desc}\n'
  2:31ecbdafd357 2-3-2
  1:9647f22de499 0-1-1
  0:4904098473f9 0-0-0

Status between revisions:

  $ hg status -S
  $ hg status -S --rev 0:1
  M .hgsubstate
  M foo/.hgsubstate
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S -I '**/?.txt' --rev 0:1
  diff -r af048e97ade2 -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,1 +1,2 @@
   y1
  +y2
  diff -r 4904098473f9 -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,1 +1,2 @@
   z1
  +z2

Enable progress extension for archive tests:

  $ cp $HGRCPATH $HGRCPATH.no-progress
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress =
  > [progress]
  > assume-tty = 1
  > delay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

Test archiving to a directory tree (the doubled lines in the output
only show up in the test output, not in real usage):

  $ hg archive --subrepos ../archive
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
                                                              \r (no-eol) (esc)
  $ find ../archive | sort
  ../archive
  ../archive/.hg_archival.txt
  ../archive/.hgsub
  ../archive/.hgsubstate
  ../archive/foo
  ../archive/foo/.hgsub
  ../archive/foo/.hgsubstate
  ../archive/foo/bar
  ../archive/foo/bar/z.txt
  ../archive/foo/y.txt
  ../archive/x.txt

Test archiving to zip file (unzip output is unstable):

  $ hg archive --subrepos ../archive.zip
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
                                                              \r (no-eol) (esc)

Test archiving a revision that references a subrepo that is not yet
cloned:

  $ hg clone -U . ../empty
  $ cd ../empty
  $ hg archive --subrepos -r tip ../archive.tar.gz
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (glob) (esc)
                                                              \r (no-eol) (esc)
  cloning subrepo foo from $TESTTMP/repo/foo
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar (glob)

The newly cloned subrepos contain no working copy:

  $ hg -R foo summary
  parent: -1:000000000000  (no revision checked out)
  branch: default
  commit: (clean)
  update: 4 new changesets (update)

Disable progress extension and cleanup:

  $ mv $HGRCPATH.no-progress $HGRCPATH

Test archiving when there is a directory in the way for a subrepo
created by archive:

  $ hg clone -U . ../almost-empty
  $ cd ../almost-empty
  $ mkdir foo
  $ echo f > foo/f
  $ hg archive --subrepos -r tip archive
  cloning subrepo foo from $TESTTMP/empty/foo
  abort: destination '$TESTTMP/almost-empty/foo' is not empty (in subrepo foo) (glob)
  [255]

Clone and test outgoing:

  $ cd ..
  $ hg clone repo repo2
  updating to branch default
  cloning subrepo foo from $TESTTMP/repo/foo
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar (glob)
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd repo2
  $ hg outgoing -S
  comparing with $TESTTMP/repo (glob)
  searching for changes
  no changes found
  comparing with $TESTTMP/repo/foo
  searching for changes
  no changes found
  comparing with $TESTTMP/repo/foo/bar
  searching for changes
  no changes found
  [1]

Make nested change:

  $ echo y4 >> foo/y.txt
  $ hg diff --nodates -S
  diff -r 65903cebad86 foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,3 +1,4 @@
   y1
   y2
   y3
  +y4
  $ hg commit --subrepos -m 3-4-2
  committing subrepository foo
  $ hg outgoing -S
  comparing with $TESTTMP/repo (glob)
  searching for changes
  changeset:   3:2655b8ecc4ee
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo/foo
  searching for changes
  changeset:   4:e96193d6cb36
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo/foo/bar
  searching for changes
  no changes found


Switch to original repo and setup default path:

  $ cd ../repo
  $ echo '[paths]' >> .hg/hgrc
  $ echo 'default = ../repo2' >> .hg/hgrc

Test incoming:

  $ hg incoming -S
  comparing with $TESTTMP/repo2 (glob)
  searching for changes
  changeset:   3:2655b8ecc4ee
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo2/foo
  searching for changes
  changeset:   4:e96193d6cb36
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo2/foo/bar
  searching for changes
  no changes found

  $ hg incoming -S --bundle incoming.hg
  abort: cannot combine --bundle and --subrepos
  [255]

Test missing subrepo:

  $ rm -r foo
  $ hg status -S
  warning: error "unknown revision '65903cebad86f1a84bd4f1134f62fa7dcb7a1c98'" in subrepository "foo"

Issue2619: IndexError: list index out of range on hg add with subrepos
The subrepo must sorts after the explicit filename.

  $ cd ..
  $ hg init test
  $ cd test
  $ hg init x
  $ echo "x = x" >> .hgsub
  $ hg add .hgsub
  $ touch a x/a
  $ hg add a x/a

  $ cd ..