add: add back forgotten files even when not matching exactly (BC)
I accidentally did 'hg forget .' and tried to undo the operation with
'hg add .'. I expected the files to be reported as either modified or
clean, but they were still reported as removed. It turns out that
forgotten files are only added back if they are listed explicitly, as
shown by the following two invocations. This makes it hard to recover
from the mistake of forgetting a lot of files.
$ hg forget README && hg add README && hg status -A README
C README
$ hg forget README && hg add . && hg status -A README
R README
The problem lies in cmdutil.add(). That method checks that the file
isn't already tracked before adding it, but it does so by checking the
dirstate, which does have an entry for forgotten files (state 'r'). We
should instead be checking whether the file exists in the
workingctx. The workingctx is also what we later call add() on, and
that method takes care of transforming the add() into a normallookup()
on the dirstate.
Since we're changing repo.dirstate into wctx, let's also change
repo.walk into wctx.walk for consistency (repo.walk calls wctx.walk,
so we're simply inlining the call).
# record.py
#
# Copyright 2007 Bryan O'Sullivan <bos@serpentine.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''commands to interactively select changes for commit/qrefresh'''
from mercurial.i18n import _
from mercurial import cmdutil, commands, extensions, hg, patch
from mercurial import util
import copy, cStringIO, errno, os, re, shutil, tempfile
cmdtable = {}
command = cmdutil.command(cmdtable)
testedwith = 'internal'
lines_re = re.compile(r'@@ -(\d+),(\d+) \+(\d+),(\d+) @@\s*(.*)')
def scanpatch(fp):
"""like patch.iterhunks, but yield different events
- ('file', [header_lines + fromfile + tofile])
- ('context', [context_lines])
- ('hunk', [hunk_lines])
- ('range', (-start,len, +start,len, proc))
"""
lr = patch.linereader(fp)
def scanwhile(first, p):
"""scan lr while predicate holds"""
lines = [first]
while True:
line = lr.readline()
if not line:
break
if p(line):
lines.append(line)
else:
lr.push(line)
break
return lines
while True:
line = lr.readline()
if not line:
break
if line.startswith('diff --git a/') or line.startswith('diff -r '):
def notheader(line):
s = line.split(None, 1)
return not s or s[0] not in ('---', 'diff')
header = scanwhile(line, notheader)
fromfile = lr.readline()
if fromfile.startswith('---'):
tofile = lr.readline()
header += [fromfile, tofile]
else:
lr.push(fromfile)
yield 'file', header
elif line[0] == ' ':
yield 'context', scanwhile(line, lambda l: l[0] in ' \\')
elif line[0] in '-+':
yield 'hunk', scanwhile(line, lambda l: l[0] in '-+\\')
else:
m = lines_re.match(line)
if m:
yield 'range', m.groups()
else:
yield 'other', line
class header(object):
"""patch header
XXX shouldn't we move this to mercurial/patch.py ?
"""
diffgit_re = re.compile('diff --git a/(.*) b/(.*)$')
diff_re = re.compile('diff -r .* (.*)$')
allhunks_re = re.compile('(?:index|new file|deleted file) ')
pretty_re = re.compile('(?:new file|deleted file) ')
special_re = re.compile('(?:index|new|deleted|copy|rename) ')
def __init__(self, header):
self.header = header
self.hunks = []
def binary(self):
return util.any(h.startswith('index ') for h in self.header)
def pretty(self, fp):
for h in self.header:
if h.startswith('index '):
fp.write(_('this modifies a binary file (all or nothing)\n'))
break
if self.pretty_re.match(h):
fp.write(h)
if self.binary():
fp.write(_('this is a binary file\n'))
break
if h.startswith('---'):
fp.write(_('%d hunks, %d lines changed\n') %
(len(self.hunks),
sum([max(h.added, h.removed) for h in self.hunks])))
break
fp.write(h)
def write(self, fp):
fp.write(''.join(self.header))
def allhunks(self):
return util.any(self.allhunks_re.match(h) for h in self.header)
def files(self):
match = self.diffgit_re.match(self.header[0])
if match:
fromfile, tofile = match.groups()
if fromfile == tofile:
return [fromfile]
return [fromfile, tofile]
else:
return self.diff_re.match(self.header[0]).groups()
def filename(self):
return self.files()[-1]
def __repr__(self):
return '<header %s>' % (' '.join(map(repr, self.files())))
def special(self):
return util.any(self.special_re.match(h) for h in self.header)
def countchanges(hunk):
"""hunk -> (n+,n-)"""
add = len([h for h in hunk if h[0] == '+'])
rem = len([h for h in hunk if h[0] == '-'])
return add, rem
class hunk(object):
"""patch hunk
XXX shouldn't we merge this with patch.hunk ?
"""
maxcontext = 3
def __init__(self, header, fromline, toline, proc, before, hunk, after):
def trimcontext(number, lines):
delta = len(lines) - self.maxcontext
if False and delta > 0:
return number + delta, lines[:self.maxcontext]
return number, lines
self.header = header
self.fromline, self.before = trimcontext(fromline, before)
self.toline, self.after = trimcontext(toline, after)
self.proc = proc
self.hunk = hunk
self.added, self.removed = countchanges(self.hunk)
def write(self, fp):
delta = len(self.before) + len(self.after)
if self.after and self.after[-1] == '\\ No newline at end of file\n':
delta -= 1
fromlen = delta + self.removed
tolen = delta + self.added
fp.write('@@ -%d,%d +%d,%d @@%s\n' %
(self.fromline, fromlen, self.toline, tolen,
self.proc and (' ' + self.proc)))
fp.write(''.join(self.before + self.hunk + self.after))
pretty = write
def filename(self):
return self.header.filename()
def __repr__(self):
return '<hunk %r@%d>' % (self.filename(), self.fromline)
def parsepatch(fp):
"""patch -> [] of headers -> [] of hunks """
class parser(object):
"""patch parsing state machine"""
def __init__(self):
self.fromline = 0
self.toline = 0
self.proc = ''
self.header = None
self.context = []
self.before = []
self.hunk = []
self.headers = []
def addrange(self, limits):
fromstart, fromend, tostart, toend, proc = limits
self.fromline = int(fromstart)
self.toline = int(tostart)
self.proc = proc
def addcontext(self, context):
if self.hunk:
h = hunk(self.header, self.fromline, self.toline, self.proc,
self.before, self.hunk, context)
self.header.hunks.append(h)
self.fromline += len(self.before) + h.removed
self.toline += len(self.before) + h.added
self.before = []
self.hunk = []
self.proc = ''
self.context = context
def addhunk(self, hunk):
if self.context:
self.before = self.context
self.context = []
self.hunk = hunk
def newfile(self, hdr):
self.addcontext([])
h = header(hdr)
self.headers.append(h)
self.header = h
def addother(self, line):
pass # 'other' lines are ignored
def finished(self):
self.addcontext([])
return self.headers
transitions = {
'file': {'context': addcontext,
'file': newfile,
'hunk': addhunk,
'range': addrange},
'context': {'file': newfile,
'hunk': addhunk,
'range': addrange,
'other': addother},
'hunk': {'context': addcontext,
'file': newfile,
'range': addrange},
'range': {'context': addcontext,
'hunk': addhunk},
'other': {'other': addother},
}
p = parser()
state = 'context'
for newstate, data in scanpatch(fp):
try:
p.transitions[state][newstate](p, data)
except KeyError:
raise patch.PatchError('unhandled transition: %s -> %s' %
(state, newstate))
state = newstate
return p.finished()
def filterpatch(ui, headers):
"""Interactively filter patch chunks into applied-only chunks"""
def prompt(skipfile, skipall, query, chunk):
"""prompt query, and process base inputs
- y/n for the rest of file
- y/n for the rest
- ? (help)
- q (quit)
Return True/False and possibly updated skipfile and skipall.
"""
newpatches = None
if skipall is not None:
return skipall, skipfile, skipall, newpatches
if skipfile is not None:
return skipfile, skipfile, skipall, newpatches
while True:
resps = _('[Ynesfdaq?]'
'$$ &Yes, record this change'
'$$ &No, skip this change'
'$$ &Edit this change manually'
'$$ &Skip remaining changes to this file'
'$$ Record remaining changes to this &file'
'$$ &Done, skip remaining changes and files'
'$$ Record &all changes to all remaining files'
'$$ &Quit, recording no changes'
'$$ &? (display help)')
r = ui.promptchoice("%s %s" % (query, resps))
ui.write("\n")
if r == 8: # ?
for c, t in ui.extractchoices(resps)[1]:
ui.write('%s - %s\n' % (c, t.lower()))
continue
elif r == 0: # yes
ret = True
elif r == 1: # no
ret = False
elif r == 2: # Edit patch
if chunk is None:
ui.write(_('cannot edit patch for whole file'))
ui.write("\n")
continue
if chunk.header.binary():
ui.write(_('cannot edit patch for binary file'))
ui.write("\n")
continue
# Patch comment based on the Git one (based on comment at end of
# http://mercurial.selenic.com/wiki/RecordExtension)
phelp = '---' + _("""
To remove '-' lines, make them ' ' lines (context).
To remove '+' lines, delete them.
Lines starting with # will be removed from the patch.
If the patch applies cleanly, the edited hunk will immediately be
added to the record list. If it does not apply cleanly, a rejects
file will be generated: you can use that when you try again. If
all lines of the hunk are removed, then the edit is aborted and
the hunk is left unchanged.
""")
(patchfd, patchfn) = tempfile.mkstemp(prefix="hg-editor-",
suffix=".diff", text=True)
ncpatchfp = None
try:
# Write the initial patch
f = os.fdopen(patchfd, "w")
chunk.header.write(f)
chunk.write(f)
f.write('\n'.join(['# ' + i for i in phelp.splitlines()]))
f.close()
# Start the editor and wait for it to complete
editor = ui.geteditor()
util.system("%s \"%s\"" % (editor, patchfn),
environ={'HGUSER': ui.username()},
onerr=util.Abort, errprefix=_("edit failed"),
out=ui.fout)
# Remove comment lines
patchfp = open(patchfn)
ncpatchfp = cStringIO.StringIO()
for line in patchfp:
if not line.startswith('#'):
ncpatchfp.write(line)
patchfp.close()
ncpatchfp.seek(0)
newpatches = parsepatch(ncpatchfp)
finally:
os.unlink(patchfn)
del ncpatchfp
# Signal that the chunk shouldn't be applied as-is, but
# provide the new patch to be used instead.
ret = False
elif r == 3: # Skip
ret = skipfile = False
elif r == 4: # file (Record remaining)
ret = skipfile = True
elif r == 5: # done, skip remaining
ret = skipall = False
elif r == 6: # all
ret = skipall = True
elif r == 7: # quit
raise util.Abort(_('user quit'))
return ret, skipfile, skipall, newpatches
seen = set()
applied = {} # 'filename' -> [] of chunks
skipfile, skipall = None, None
pos, total = 1, sum(len(h.hunks) for h in headers)
for h in headers:
pos += len(h.hunks)
skipfile = None
fixoffset = 0
hdr = ''.join(h.header)
if hdr in seen:
continue
seen.add(hdr)
if skipall is None:
h.pretty(ui)
msg = (_('examine changes to %s?') %
_(' and ').join("'%s'" % f for f in h.files()))
r, skipfile, skipall, np = prompt(skipfile, skipall, msg, None)
if not r:
continue
applied[h.filename()] = [h]
if h.allhunks():
applied[h.filename()] += h.hunks
continue
for i, chunk in enumerate(h.hunks):
if skipfile is None and skipall is None:
chunk.pretty(ui)
if total == 1:
msg = _("record this change to '%s'?") % chunk.filename()
else:
idx = pos - len(h.hunks) + i
msg = _("record change %d/%d to '%s'?") % (idx, total,
chunk.filename())
r, skipfile, skipall, newpatches = prompt(skipfile,
skipall, msg, chunk)
if r:
if fixoffset:
chunk = copy.copy(chunk)
chunk.toline += fixoffset
applied[chunk.filename()].append(chunk)
elif newpatches is not None:
for newpatch in newpatches:
for newhunk in newpatch.hunks:
if fixoffset:
newhunk.toline += fixoffset
applied[newhunk.filename()].append(newhunk)
else:
fixoffset += chunk.removed - chunk.added
return sum([h for h in applied.itervalues()
if h[0].special() or len(h) > 1], [])
@command("record",
# same options as commit + white space diff options
commands.table['^commit|ci'][1][:] + commands.diffwsopts,
_('hg record [OPTION]... [FILE]...'))
def record(ui, repo, *pats, **opts):
'''interactively select changes to commit
If a list of files is omitted, all changes reported by :hg:`status`
will be candidates for recording.
See :hg:`help dates` for a list of formats valid for -d/--date.
You will be prompted for whether to record changes to each
modified file, and for files with multiple changes, for each
change to use. For each query, the following responses are
possible::
y - record this change
n - skip this change
e - edit this change manually
s - skip remaining changes to this file
f - record remaining changes to this file
d - done, skip remaining changes and files
a - record all changes to all remaining files
q - quit, recording no changes
? - display help
This command is not available when committing a merge.'''
dorecord(ui, repo, commands.commit, 'commit', False, *pats, **opts)
def qrefresh(origfn, ui, repo, *pats, **opts):
if not opts['interactive']:
return origfn(ui, repo, *pats, **opts)
mq = extensions.find('mq')
def committomq(ui, repo, *pats, **opts):
# At this point the working copy contains only changes that
# were accepted. All other changes were reverted.
# We can't pass *pats here since qrefresh will undo all other
# changed files in the patch that aren't in pats.
mq.refresh(ui, repo, **opts)
# backup all changed files
dorecord(ui, repo, committomq, 'qrefresh', True, *pats, **opts)
# This command registration is replaced during uisetup().
@command('qrecord',
[],
_('hg qrecord [OPTION]... PATCH [FILE]...'),
inferrepo=True)
def qrecord(ui, repo, patch, *pats, **opts):
'''interactively record a new patch
See :hg:`help qnew` & :hg:`help record` for more information and
usage.
'''
try:
mq = extensions.find('mq')
except KeyError:
raise util.Abort(_("'mq' extension not loaded"))
repo.mq.checkpatchname(patch)
def committomq(ui, repo, *pats, **opts):
opts['checkname'] = False
mq.new(ui, repo, patch, *pats, **opts)
dorecord(ui, repo, committomq, 'qnew', False, *pats, **opts)
def qnew(origfn, ui, repo, patch, *args, **opts):
if opts['interactive']:
return qrecord(ui, repo, patch, *args, **opts)
return origfn(ui, repo, patch, *args, **opts)
def dorecord(ui, repo, commitfunc, cmdsuggest, backupall, *pats, **opts):
if not ui.interactive():
raise util.Abort(_('running non-interactively, use %s instead') %
cmdsuggest)
# make sure username is set before going interactive
if not opts.get('user'):
ui.username() # raise exception, username not provided
def recordfunc(ui, repo, message, match, opts):
"""This is generic record driver.
Its job is to interactively filter local changes, and
accordingly prepare working directory into a state in which the
job can be delegated to a non-interactive commit command such as
'commit' or 'qrefresh'.
After the actual job is done by non-interactive command, the
working directory is restored to its original state.
In the end we'll record interesting changes, and everything else
will be left in place, so the user can continue working.
"""
cmdutil.checkunfinished(repo, commit=True)
merge = len(repo[None].parents()) > 1
if merge:
raise util.Abort(_('cannot partially commit a merge '
'(use "hg commit" instead)'))
status = repo.status(match=match)
diffopts = opts.copy()
diffopts['nodates'] = True
diffopts['git'] = True
diffopts = patch.diffopts(ui, opts=diffopts)
chunks = patch.diff(repo, changes=status, opts=diffopts)
fp = cStringIO.StringIO()
fp.write(''.join(chunks))
fp.seek(0)
# 1. filter patch, so we have intending-to apply subset of it
try:
chunks = filterpatch(ui, parsepatch(fp))
except patch.PatchError, err:
raise util.Abort(_('error parsing patch: %s') % err)
del fp
contenders = set()
for h in chunks:
try:
contenders.update(set(h.files()))
except AttributeError:
pass
changed = status.modified + status.added + status.removed
newfiles = [f for f in changed if f in contenders]
if not newfiles:
ui.status(_('no changes to record\n'))
return 0
modified = set(status.modified)
# 2. backup changed files, so we can restore them in the end
if backupall:
tobackup = changed
else:
tobackup = [f for f in newfiles if f in modified]
backups = {}
if tobackup:
backupdir = repo.join('record-backups')
try:
os.mkdir(backupdir)
except OSError, err:
if err.errno != errno.EEXIST:
raise
try:
# backup continues
for f in tobackup:
fd, tmpname = tempfile.mkstemp(prefix=f.replace('/', '_')+'.',
dir=backupdir)
os.close(fd)
ui.debug('backup %r as %r\n' % (f, tmpname))
util.copyfile(repo.wjoin(f), tmpname)
shutil.copystat(repo.wjoin(f), tmpname)
backups[f] = tmpname
fp = cStringIO.StringIO()
for c in chunks:
if c.filename() in backups:
c.write(fp)
dopatch = fp.tell()
fp.seek(0)
# 3a. apply filtered patch to clean repo (clean)
if backups:
hg.revert(repo, repo.dirstate.p1(),
lambda key: key in backups)
# 3b. (apply)
if dopatch:
try:
ui.debug('applying patch\n')
ui.debug(fp.getvalue())
patch.internalpatch(ui, repo, fp, 1, eolmode=None)
except patch.PatchError, err:
raise util.Abort(str(err))
del fp
# 4. We prepared working directory according to filtered
# patch. Now is the time to delegate the job to
# commit/qrefresh or the like!
# Make all of the pathnames absolute.
newfiles = [repo.wjoin(nf) for nf in newfiles]
commitfunc(ui, repo, *newfiles, **opts)
return 0
finally:
# 5. finally restore backed-up files
try:
for realname, tmpname in backups.iteritems():
ui.debug('restoring %r to %r\n' % (tmpname, realname))
util.copyfile(tmpname, repo.wjoin(realname))
# Our calls to copystat() here and above are a
# hack to trick any editors that have f open that
# we haven't modified them.
#
# Also note that this racy as an editor could
# notice the file's mtime before we've finished
# writing it.
shutil.copystat(tmpname, repo.wjoin(realname))
os.unlink(tmpname)
if tobackup:
os.rmdir(backupdir)
except OSError:
pass
# wrap ui.write so diff output can be labeled/colorized
def wrapwrite(orig, *args, **kw):
label = kw.pop('label', '')
for chunk, l in patch.difflabel(lambda: args):
orig(chunk, label=label + l)
oldwrite = ui.write
extensions.wrapfunction(ui, 'write', wrapwrite)
try:
return cmdutil.commit(ui, repo, recordfunc, pats, opts)
finally:
ui.write = oldwrite
def uisetup(ui):
try:
mq = extensions.find('mq')
except KeyError:
return
cmdtable["qrecord"] = \
(qrecord,
# same options as qnew, but copy them so we don't get
# -i/--interactive for qrecord and add white space diff options
mq.cmdtable['^qnew'][1][:] + commands.diffwsopts,
_('hg qrecord [OPTION]... PATCH [FILE]...'))
_wrapcmd('qnew', mq.cmdtable, qnew, _("interactively record a new patch"))
_wrapcmd('qrefresh', mq.cmdtable, qrefresh,
_("interactively select changes to refresh"))
def _wrapcmd(cmd, table, wrapfn, msg):
entry = extensions.wrapcommand(table, cmd, wrapfn)
entry[1].append(('i', 'interactive', None, msg))