rhg: in path_encode, split Dest into VecDest and MeasureDest
Two separate types make the write semantics easier to understand
because we can consider the two sinks separately.
Having two independent compiled functions for size measurement
and for actual encoding seems likely to improve performance, too.
(and maybe we should get rid of measurement altogether)
Getting rid of [Dest] also removes the ugly option rewrapping
code, which is good.
#require test-repo
Set vars:
$ . "$TESTDIR/helpers-testrepo.sh"
$ CONTRIBDIR="$TESTDIR/../contrib"
Prepare repo:
$ hg init
$ echo this is file a > a
$ hg add a
$ hg commit -m first
$ echo adding to file a >> a
$ hg commit -m second
$ echo adding more to file a >> a
$ hg commit -m third
$ hg up -r 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo merge-this >> a
$ hg commit -m merge-able
created new head
$ hg up -r 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
perfstatus
$ cat >> $HGRCPATH << EOF
> [extensions]
> perf=$CONTRIBDIR/perf.py
> [perf]
> presleep=0
> stub=on
> parentscount=1
> EOF
$ hg help -e perf
perf extension - helper extension to measure performance
Configurations
==============
"perf"
------
"all-timing"
When set, additional statistics will be reported for each benchmark: best,
worst, median average. If not set only the best timing is reported
(default: off).
"presleep"
number of second to wait before any group of runs (default: 1)
"pre-run"
number of run to perform before starting measurement.
"profile-benchmark"
Enable profiling for the benchmarked section. (The first iteration is
benchmarked)
"run-limits"
Control the number of runs each benchmark will perform. The option value
should be a list of '<time>-<numberofrun>' pairs. After each run the
conditions are considered in order with the following logic:
If benchmark has been running for <time> seconds, and we have performed
<numberofrun> iterations, stop the benchmark,
The default value is: '3.0-100, 10.0-3'
"stub"
When set, benchmarks will only be run once, useful for testing (default:
off)
list of commands:
perf::addremove
(no help text available)
perf::ancestors
(no help text available)
perf::ancestorset
(no help text available)
perf::annotate
(no help text available)
perf::bdiff benchmark a bdiff between revisions
perf::bookmarks
benchmark parsing bookmarks from disk to memory
perf::branchmap
benchmark the update of a branchmap
perf::branchmapload
benchmark reading the branchmap
perf::branchmapupdate
benchmark branchmap update from for <base> revs to <target>
revs
perf::bundle benchmark the creation of a bundle from a repository
perf::bundleread
Benchmark reading of bundle files.
perf::cca (no help text available)
perf::changegroupchangelog
Benchmark producing a changelog group for a changegroup.
perf::changeset
(no help text available)
perf::ctxfiles
(no help text available)
perf::delta-find
benchmark the process of finding a valid delta for a revlog
revision
perf::diffwd Profile diff of working directory changes
perf::dirfoldmap
benchmap a 'dirstate._map.dirfoldmap.get()' request
perf::dirs (no help text available)
perf::dirstate
benchmap the time of various distate operations
perf::dirstatedirs
benchmap a 'dirstate.hasdir' call from an empty 'dirs' cache
perf::dirstatefoldmap
benchmap a 'dirstate._map.filefoldmap.get()' request
perf::dirstatewrite
benchmap the time it take to write a dirstate on disk
perf::discovery
benchmark discovery between local repo and the peer at given
path
perf::fncacheencode
(no help text available)
perf::fncacheload
(no help text available)
perf::fncachewrite
(no help text available)
perf::heads benchmark the computation of a changelog heads
perf::helper-mergecopies
find statistics about potential parameters for
'perfmergecopies'
perf::helper-pathcopies
find statistic about potential parameters for the
'perftracecopies'
perf::ignore benchmark operation related to computing ignore
perf::index benchmark index creation time followed by a lookup
perf::linelogedits
(no help text available)
perf::loadmarkers
benchmark the time to parse the on-disk markers for a repo
perf::log (no help text available)
perf::lookup (no help text available)
perf::lrucachedict
(no help text available)
perf::manifest
benchmark the time to read a manifest from disk and return a
usable
perf::mergecalculate
(no help text available)
perf::mergecopies
measure runtime of 'copies.mergecopies'
perf::moonwalk
benchmark walking the changelog backwards
perf::nodelookup
(no help text available)
perf::nodemap
benchmark the time necessary to look up revision from a cold
nodemap
perf::parents
benchmark the time necessary to fetch one changeset's parents.
perf::pathcopies
benchmark the copy tracing logic
perf::phases benchmark phasesets computation
perf::phasesremote
benchmark time needed to analyse phases of the remote server
perf::progress
printing of progress bars
perf::rawfiles
(no help text available)
perf::revlogchunks
Benchmark operations on revlog chunks.
perf::revlogindex
Benchmark operations against a revlog index.
perf::revlogrevision
Benchmark obtaining a revlog revision.
perf::revlogrevisions
Benchmark reading a series of revisions from a revlog.
perf::revlogwrite
Benchmark writing a series of revisions to a revlog.
perf::revrange
(no help text available)
perf::revset benchmark the execution time of a revset
perf::startup
(no help text available)
perf::status benchmark the performance of a single status call
perf::tags (no help text available)
perf::templating
test the rendering time of a given template
perf::unbundle
benchmark application of a bundle in a repository.
perf::unidiff
benchmark a unified diff between revisions
perf::volatilesets
benchmark the computation of various volatile set
perf::walk (no help text available)
perf::write microbenchmark ui.write (and others)
(use 'hg help -v perf' to show built-in aliases and global options)
$ hg help perfaddremove
hg perf::addremove
aliases: perfaddremove
(no help text available)
options:
-T --template TEMPLATE display with template
(some details hidden, use --verbose to show complete help)
$ hg perfaddremove
$ hg perfancestors
$ hg perfancestorset 2
$ hg perfannotate a
$ hg perfbdiff -c 1
$ hg perfbdiff --alldata 1
$ hg perfunidiff -c 1
$ hg perfunidiff --alldata 1
$ hg perfbookmarks
$ hg perfbranchmap
$ hg perfbranchmapload
$ hg perfbranchmapupdate --base "not tip" --target "tip"
benchmark of branchmap with 3 revisions with 1 new ones
$ hg perfcca
$ hg perfchangegroupchangelog
$ hg perfchangegroupchangelog --cgversion 01
$ hg perfchangeset 2
$ hg perfctxfiles 2
$ hg perfdiffwd
$ hg perfdirfoldmap
$ hg perfdirs
$ hg perfdirstate
$ hg perfdirstate --contains
$ hg perfdirstate --iteration
$ hg perfdirstatedirs
$ hg perfdirstatefoldmap
$ hg perfdirstatewrite
#if repofncache
$ hg perffncacheencode
$ hg perffncacheload
$ hg debugrebuildfncache
fncache already up to date
$ hg perffncachewrite
$ hg debugrebuildfncache
fncache already up to date
#endif
$ hg perfheads
$ hg perfignore
$ hg perfindex
$ hg perflinelogedits -n 1
$ hg perfloadmarkers
$ hg perflog
$ hg perflookup 2
$ hg perflrucache
$ hg perfmanifest 2
$ hg perfmanifest -m 44fe2c8352bb3a478ffd7d8350bbc721920134d1
$ hg perfmanifest -m 44fe2c8352bb
abort: manifest revision must be integer or full node
[255]
$ hg perfmergecalculate -r 3
$ hg perfmoonwalk
$ hg perfnodelookup 2
$ hg perfpathcopies 1 2
$ hg perfprogress --total 1000
$ hg perfrawfiles 2
$ hg perfrevlogindex -c
#if reporevlogstore
$ hg perfrevlogrevisions .hg/store/data/a.i
#endif
$ hg perfrevlogrevision -m 0
$ hg perfrevlogchunks -c
$ hg perfrevrange
$ hg perfrevset 'all()'
$ hg perfstartup
$ hg perfstatus
$ hg perfstatus --dirstate
$ hg perftags
$ hg perftemplating
$ hg perfvolatilesets
$ hg perfwalk
$ hg perfparents
$ hg perfdiscovery -q .
Test run control
----------------
Simple single entry
$ hg perfparents --config perf.stub=no --config perf.run-limits='0.000000001-15'
! wall * comb * user * sys * (best of 15) (glob)
Multiple entries
$ hg perfparents --config perf.stub=no --config perf.run-limits='500000-1, 0.000000001-5'
! wall * comb * user * sys * (best of 5) (glob)
error case are ignored
$ hg perfparents --config perf.stub=no --config perf.run-limits='500, 0.000000001-5'
malformatted run limit entry, missing "-": 500
! wall * comb * user * sys * (best of 5) (glob)
$ hg perfparents --config perf.stub=no --config perf.run-limits='aaa-12, 0.000000001-5'
malformatted run limit entry, could not convert string to float: 'aaa': aaa-12
! wall * comb * user * sys * (best of 5) (glob)
$ hg perfparents --config perf.stub=no --config perf.run-limits='12-aaaaaa, 0.000000001-5'
malformatted run limit entry, invalid literal for int() with base 10: 'aaaaaa': 12-aaaaaa
! wall * comb * user * sys * (best of 5) (glob)
test actual output
------------------
normal output:
$ hg perfheads --config perf.stub=no
! wall * comb * user * sys * (best of *) (glob)
detailed output:
$ hg perfheads --config perf.all-timing=yes --config perf.stub=no
! wall * comb * user * sys * (best of *) (glob)
! wall * comb * user * sys * (max of *) (glob)
! wall * comb * user * sys * (avg of *) (glob)
! wall * comb * user * sys * (median of *) (glob)
test json output
----------------
normal output:
$ hg perfheads --template json --config perf.stub=no
[
{
"comb": *, (glob)
"count": *, (glob)
"sys": *, (glob)
"user": *, (glob)
"wall": * (glob)
}
]
detailed output:
$ hg perfheads --template json --config perf.all-timing=yes --config perf.stub=no
[
{
"avg.comb": *, (glob)
"avg.count": *, (glob)
"avg.sys": *, (glob)
"avg.user": *, (glob)
"avg.wall": *, (glob)
"comb": *, (glob)
"count": *, (glob)
"max.comb": *, (glob)
"max.count": *, (glob)
"max.sys": *, (glob)
"max.user": *, (glob)
"max.wall": *, (glob)
"median.comb": *, (glob)
"median.count": *, (glob)
"median.sys": *, (glob)
"median.user": *, (glob)
"median.wall": *, (glob)
"sys": *, (glob)
"user": *, (glob)
"wall": * (glob)
}
]
Test pre-run feature
--------------------
(perf discovery has some spurious output)
$ hg perfdiscovery . --config perf.stub=no --config perf.run-limits='0.000000001-1' --config perf.pre-run=0
! wall * comb * user * sys * (best of 1) (glob)
searching for changes
$ hg perfdiscovery . --config perf.stub=no --config perf.run-limits='0.000000001-1' --config perf.pre-run=1
! wall * comb * user * sys * (best of 1) (glob)
searching for changes
searching for changes
$ hg perfdiscovery . --config perf.stub=no --config perf.run-limits='0.000000001-1' --config perf.pre-run=3
! wall * comb * user * sys * (best of 1) (glob)
searching for changes
searching for changes
searching for changes
searching for changes
$ hg perf::bundle 'last(all(), 5)'
$ hg bundle --exact --rev 'last(all(), 5)' last-5.hg
4 changesets found
$ hg perf::unbundle last-5.hg
test profile-benchmark option
------------------------------
Function to check that statprof ran
$ statprofran () {
> egrep 'Sample count:|No samples recorded' > /dev/null
> }
$ hg perfdiscovery . --config perf.stub=no --config perf.run-limits='0.000000001-1' --config perf.profile-benchmark=yes 2>&1 | statprofran
Check perf.py for historical portability
----------------------------------------
$ cd "$TESTDIR/.."
$ (testrepohg files -r 1.2 glob:mercurial/*.c glob:mercurial/*.py;
> testrepohg files -r tip glob:mercurial/*.c glob:mercurial/*.py) |
> "$TESTDIR"/check-perf-code.py contrib/perf.py
contrib/perf.py:\d+: (re)
> from mercurial import (
import newer module separately in try clause for early Mercurial
contrib/perf.py:\d+: (re)
> from mercurial import (
import newer module separately in try clause for early Mercurial
contrib/perf.py:\d+: (re)
> origindexpath = orig.opener.join(indexfile)
use getvfs()/getsvfs() for early Mercurial
contrib/perf.py:\d+: (re)
> origdatapath = orig.opener.join(datafile)
use getvfs()/getsvfs() for early Mercurial
contrib/perf.py:\d+: (re)
> vfs = vfsmod.vfs(tmpdir)
use getvfs()/getsvfs() for early Mercurial
contrib/perf.py:\d+: (re)
> vfs.options = getattr(orig.opener, 'options', None)
use getvfs()/getsvfs() for early Mercurial
[1]