view tests/common-pattern.py @ 50195:11e6eee4b063

transaction: use the standard transaction mechanism to backup branch

Branch is a bit special :
- It currently does not collaborate with the transaction (or any scoping) for
  writing (this is bad)
- It can change without the lock being taken (it is protected by `wlock`)

So we rely on the same mechanism as for the backup of the other dirstate file:
- we only do a backup if we hold the wlock
- we force a backup though the transaction


Since "branch" write does not collaborate with the transaction, we cannot back
it up "at the last minute" as we do for the dirstate. We have to back it up
"upfront". Since we have a backup, the transaction is no longer doing its
"quick_abort" and get noisy. Which is quite annoying. To work around this, and
to avoid jumping in yet-another-rabbit-hole of "getting branch written
properly", I am doing horrible things to the transaction in the meantime.
We should be able to get this code go away during the next cycle.

In the meantime, I prefer to take this small stop so that we stop abusing the
"journal" and "undo" mechanism instead of the proper backup mechanism of the
transaction.


Also note that this change regress the warning message for the legacy fallback
introduced in 2008 when issue902 got fixed in dd5a501cb97f (Mercurial 1.0).

I feel like this is fine as issue 902 remains fixed, and this would only affect
people deploying a mix of 15 year old Mercurial and modern mercurial, and using
branch and rollback extensively.

# common patterns in test at can safely be replaced

import os

substitutions = [
    # list of possible compressions
    (br'(zstd,)?zlib,none,bzip2', br'$USUAL_COMPRESSIONS$'),
    (br'=(zstd,)?zlib', br'=$BUNDLE2_COMPRESSIONS$'),
    # capabilities sent through http
    (
        br'bundlecaps=HG20%2Cbundle2%3DHG20%250A'
        br'bookmarks%250A'
        br'changegroup%253D01%252C02%250A'
        br'checkheads%253Drelated%250A'
        br'digests%253Dmd5%252Csha1%252Csha512%250A'
        br'error%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250A'
        br'hgtagsfnodes%250A'
        br'listkeys%250A'
        br'phases%253Dheads%250A'
        br'pushkey%250A'
        br'remote-changegroup%253Dhttp%252Chttps%250A'
        br'stream%253Dv2',
        # (the replacement patterns)
        br'$USUAL_BUNDLE_CAPS$',
    ),
    (
        br'bundlecaps=HG20%2Cbundle2%3DHG20%250A'
        br'bookmarks%250A'
        br'changegroup%253D01%252C02%250A'
        br'checkheads%3Drelated%0A'
        br'digests%253Dmd5%252Csha1%252Csha512%250A'
        br'error%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250A'
        br'hgtagsfnodes%250A'
        br'listkeys%250A'
        br'phases%253Dheads%250A'
        br'pushkey%250A'
        br'remote-changegroup%253Dhttp%252Chttps',
        # (the replacement patterns)
        br'$USUAL_BUNDLE_CAPS_SERVER$',
    ),
    # bundle2 capabilities sent through ssh
    (
        br'bundle2=HG20%0A'
        br'bookmarks%0A'
        br'changegroup%3D01%2C02%0A'
        br'checkheads%3Drelated%0A'
        br'digests%3Dmd5%2Csha1%2Csha512%0A'
        br'error%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0A'
        br'hgtagsfnodes%0A'
        br'listkeys%0A'
        br'phases%3Dheads%0A'
        br'pushkey%0A'
        br'remote-changegroup%3Dhttp%2Chttps%0A'
        br'stream%3Dv2',
        # (replacement patterns)
        br'$USUAL_BUNDLE2_CAPS$',
    ),
    # bundle2 capabilities advertised by the server
    (
        br'bundle2=HG20%0A'
        br'bookmarks%0A'
        br'changegroup%3D01%2C02%0A'
        br'checkheads%3Drelated%0A'
        br'digests%3Dmd5%2Csha1%2Csha512%0A'
        br'error%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0A'
        br'hgtagsfnodes%0A'
        br'listkeys%0A'
        br'phases%3Dheads%0A'
        br'pushkey%0A'
        br'remote-changegroup%3Dhttp%2Chttps',
        # (replacement patterns)
        br'$USUAL_BUNDLE2_CAPS_SERVER$',
    ),
    (
        br'bundle2=HG20%0A'
        br'bookmarks%0A'
        br'changegroup%3D01%2C02%0A'
        br'digests%3Dmd5%2Csha1%2Csha512%0A'
        br'error%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0A'
        br'hgtagsfnodes%0A'
        br'listkeys%0A'
        br'pushkey%0A'
        br'remote-changegroup%3Dhttp%2Chttps%0A'
        br'stream%3Dv2',
        # (replacement patterns)
        br'$USUAL_BUNDLE2_CAPS_NO_PHASES$',
    ),
    # HTTP access log dates
    (
        br' - - \[\d\d/.../2\d\d\d \d\d:\d\d:\d\d] "(GET|PUT|POST)',
        lambda m: br' - - [$LOGDATE$] "' + m.group(1),
    ),
    # HTTP error log dates
    (
        br' - - \[\d\d/.../2\d\d\d \d\d:\d\d:\d\d] (HG error:|Exception)',
        lambda m: br' - - [$ERRDATE$] ' + m.group(1),
    ),
    # HTTP header dates- RFC 1123
    (
        br'([Dd]ate): [A-Za-z]{3}, \d\d [A-Za-z]{3} \d{4} \d\d:\d\d:\d\d GMT',
        lambda m: br'%s: $HTTP_DATE$' % m.group(1),
    ),
    # LFS expiration value
    (
        br'"expires_at": "\d{4}-\d\d-\d\dT\d\d:\d\d:\d\dZ"',
        br'"expires_at": "$ISO_8601_DATE_TIME$"',
    ),
    # Windows has an extra '/' in the following lines that get globbed away:
    #   pushing to file:/*/$TESTTMP/r2 (glob)
    #   comparing with file:/*/$TESTTMP/r2 (glob)
    #   sub/maybelarge.dat: largefile 34..9c not available from
    #       file:/*/$TESTTMP/largefiles-repo (glob)
    (
        br'(.*file:/)/?(/\$TESTTMP.*)',
        lambda m: m.group(1) + b'*' + m.group(2) + b' (glob)',
    ),
    # `hg clone --stream` output
    (
        br'transferred (\S+?) KB in \S+? seconds \(.+?/sec\)(?: \(glob\))?(.*)',
        lambda m: (
            br'transferred %s KB in * seconds (* */sec) (glob)%s'
            % (m.group(1), m.group(2))
        ),
    ),
]

# Various platform error strings, keyed on a common replacement string
_errors = {
    br'$ENOENT$': (
        # IOError in Python does not have the same error message
        # than in Rust, and automatic conversion is not possible
        # because of module member privacy.
        br'No such file or directory \(os error 2\)',
        # strerror()
        br'No such file or directory',
        # FormatMessage(ERROR_FILE_NOT_FOUND)
        br'The system cannot find the file specified',
    ),
    br'$ENOTDIR$': (
        # strerror()
        br'Not a directory',
        # FormatMessage(ERROR_PATH_NOT_FOUND)
        br'The system cannot find the path specified',
    ),
    br'$ECONNRESET$': (
        # strerror()
        br'Connection reset by peer',
        # FormatMessage(WSAECONNRESET)
        br'An existing connection was forcibly closed by the remote host',
    ),
    br'$EADDRINUSE$': (
        # strerror()
        br'Address already in use',
        # FormatMessage(WSAEADDRINUSE)
        br'Only one usage of each socket address'
        br' \(protocol/network address/port\) is normally permitted',
    ),
    br'$EADDRNOTAVAIL$': (
        # strerror()
        br'Cannot assign requested address',
        br'Can\'t assign requested address',
        # FormatMessage(WSAEADDRNOTAVAIL)
    ),
}

for replace, msgs in _errors.items():
    substitutions.extend((m, replace) for m in msgs)

# Output lines on Windows that can be autocorrected for '\' vs '/' path
# differences.
_winpathfixes = [
    # cloning subrepo s\ss from $TESTTMP/t/s/ss
    # cloning subrepo foo\bar from http://localhost:$HGPORT/foo/bar
    br'(?m)^cloning subrepo \S+\\.*',
    # pulling from $TESTTMP\issue1852a
    br'(?m)^pulling from \$TESTTMP\\.*',
    # pushing to $TESTTMP\a
    br'(?m)^pushing to \$TESTTMP\\.*',
    # pushing subrepo s\ss to $TESTTMP/t/s/ss
    br'(?m)^pushing subrepo \S+\\\S+ to.*',
    # moving d1\d11\a1 to d3/d11/a1
    br'(?m)^moving \S+\\.*',
    # d1\a: not recording move - dummy does not exist
    br'\S+\\\S+: not recording move .+',
    # reverting s\a
    br'(?m)^reverting (?!subrepo ).*\\.*',
    # saved backup bundle to
    #     $TESTTMP\test\.hg\strip-backup/443431ffac4f-2fc5398a-backup.hg
    br'(?m)^saved backup bundle to \$TESTTMP.*\.hg',
    # no changes made to subrepo s\ss since last push to ../tcc/s/ss
    br'(?m)^no changes made to subrepo \S+\\\S+ since.*',
    # changeset 5:9cc5aa7204f0: stuff/maybelarge.dat references missing
    #     $TESTTMP\largefiles-repo-hg\.hg\largefiles\76..38
    br'(?m)^changeset .* references (corrupted|missing) \$TESTTMP\\.*',
    # stuff/maybelarge.dat: largefile 76..38 not available from
    #     file:/*/$TESTTMP\largefiles-repo (glob)
    br'.*: largefile \S+ not available from file:/\*/.+',
]

if os.name == 'nt':
    substitutions.extend(
        [
            (s, lambda match: match.group().replace(b'\\', b'/'))
            for s in _winpathfixes
        ]
    )