view tests/test-pull-branch.t @ 50195:11e6eee4b063

transaction: use the standard transaction mechanism to backup branch

Branch is a bit special :
- It currently does not collaborate with the transaction (or any scoping) for
  writing (this is bad)
- It can change without the lock being taken (it is protected by `wlock`)

So we rely on the same mechanism as for the backup of the other dirstate file:
- we only do a backup if we hold the wlock
- we force a backup though the transaction


Since "branch" write does not collaborate with the transaction, we cannot back
it up "at the last minute" as we do for the dirstate. We have to back it up
"upfront". Since we have a backup, the transaction is no longer doing its
"quick_abort" and get noisy. Which is quite annoying. To work around this, and
to avoid jumping in yet-another-rabbit-hole of "getting branch written
properly", I am doing horrible things to the transaction in the meantime.
We should be able to get this code go away during the next cycle.

In the meantime, I prefer to take this small stop so that we stop abusing the
"journal" and "undo" mechanism instead of the proper backup mechanism of the
transaction.


Also note that this change regress the warning message for the legacy fallback
introduced in 2008 when issue902 got fixed in dd5a501cb97f (Mercurial 1.0).

I feel like this is fine as issue 902 remains fixed, and this would only affect
people deploying a mix of 15 year old Mercurial and modern mercurial, and using
branch and rollback extensively.

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am1 # 0
  adding foo
  $ hg branch branchA
  marked working directory as branch branchA
  (branches are permanent and global, did you want a bookmark?)
  $ echo a1 > foo
  $ hg ci -ma1 # 1

  $ cd ..
  $ hg init tt
  $ cd tt
  $ hg pull ../t
  pulling from ../t
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  new changesets 495a0ec48aaf:50e089d141b7
  (run 'hg update' to get a working copy)
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ echo a2 > foo
  $ hg ci -ma2 # 2

Create branch B:

  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchB
  marked working directory as branch branchB
  $ echo b1 > foo
  $ hg ci -mb1 # 3

  $ cd ../tt

A new branch is there

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+1 heads)
  new changesets 9f878dea0b96:5be59ce5067b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Develop both branches:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a3 > foo
  $ hg ci -ma3 # 4
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b2 > foo
  $ hg ci -mb2 # 5

  $ cd ../tt

Should succeed, no new heads:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  new changesets 7c8fe7e20c32:453e93fa00a5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Add a head on other branch:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a4 > foo
  $ hg ci -ma4 # 6
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.1 > foo
  $ hg ci -m b3.1 # 7
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.2 > foo
  $ hg ci -m b3.2 # 8
  created new head

  $ cd ../tt

Should succeed because there is only one head on our branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files (+1 heads)
  new changesets da3a8a0161c6:b61cab8fe4e8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ hg up -C branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.1 > foo
  $ hg ci -ma5.1 # 9
  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.2 > foo
  $ hg ci -ma5.2 # 10
  created new head
  $ hg up 7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.1 > foo
  $ hg ci -m b4.1 # 11
  $ hg up -C 8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.2 > foo
  $ hg ci -m b4.2 # 12

  $ cd ../tt

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+1 heads)
  new changesets 0c4d148ae29e:ecfc3f4a6fd9
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "d740e1a584e7: a5.2"
  1 other heads for branch "branchA"

Make changes on new branch on tt

  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchC
  marked working directory as branch branchC
  $ echo b1 > bar
  $ hg ci -Am "commit on branchC on tt"
  adding bar

Make changes on default branch on t

  $ cd ../t
  $ hg up -C default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar
  $ hg ci -Am "commit on default on t"
  adding bar

Pull branchC from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7d8ffa4c0b22
  13 local changesets published
  (run 'hg heads' to see heads)

Make changes on default and branchC on tt

  $ cd ../tt
  $ hg pull ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 2b94b54b6b5f
  1 local changesets published
  (run 'hg heads' to see heads)
  $ hg up -C default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar1
  $ hg ci -Am "commit on default on tt"
  adding bar1
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar2
  $ hg ci -Am "commit on branchC on tt"
  adding bar2

Make changes on default and branchC on t

  $ cd ../t
  $ hg up default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar3
  $ hg ci -Am "commit on default on t"
  adding bar3
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar4
  $ hg ci -Am "commit on branchC on tt"
  adding bar4

Pull from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+2 heads)
  new changesets eed40c14b407:e634733b0309
  1 local changesets published
  (run 'hg heads .' to see heads, 'hg merge' to merge)

  $ cd ..