view tests/test-push.t @ 50195:11e6eee4b063

transaction: use the standard transaction mechanism to backup branch

Branch is a bit special :
- It currently does not collaborate with the transaction (or any scoping) for
  writing (this is bad)
- It can change without the lock being taken (it is protected by `wlock`)

So we rely on the same mechanism as for the backup of the other dirstate file:
- we only do a backup if we hold the wlock
- we force a backup though the transaction


Since "branch" write does not collaborate with the transaction, we cannot back
it up "at the last minute" as we do for the dirstate. We have to back it up
"upfront". Since we have a backup, the transaction is no longer doing its
"quick_abort" and get noisy. Which is quite annoying. To work around this, and
to avoid jumping in yet-another-rabbit-hole of "getting branch written
properly", I am doing horrible things to the transaction in the meantime.
We should be able to get this code go away during the next cycle.

In the meantime, I prefer to take this small stop so that we stop abusing the
"journal" and "undo" mechanism instead of the proper backup mechanism of the
transaction.


Also note that this change regress the warning message for the legacy fallback
introduced in 2008 when issue902 got fixed in dd5a501cb97f (Mercurial 1.0).

I feel like this is fine as issue 902 remains fixed, and this would only affect
people deploying a mix of 15 year old Mercurial and modern mercurial, and using
branch and rollback extensively.

==================================
Basic testing for the push command
==================================

Testing of the '--rev' flag
===========================

  $ hg init test-revflag
  $ hg -R test-revflag unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  new changesets bfaf4b5cbf01:916f1afdef90 (9 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    echo
  >    hg init test-revflag-"$i"
  >    hg -R test-revflag push -r "$i" test-revflag-"$i"
  >    hg -R test-revflag-"$i" verify -q
  > done
  
  pushing to test-revflag-0
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  
  pushing to test-revflag-1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-3
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  
  pushing to test-revflag-4
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  
  pushing to test-revflag-5
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  
  pushing to test-revflag-6
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  
  pushing to test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  
  pushing to test-revflag-8
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files

  $ cd test-revflag-8

  $ hg pull ../test-revflag-7
  pulling from ../test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  new changesets c70afb1ee985:faa2e4234c7a
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg verify -q

  $ cd ..

Test server side validation during push
=======================================

  $ hg init test-validation
  $ cd test-validation

  $ cat > .hg/hgrc <<EOF
  > [server]
  > validate=1
  > EOF

  $ echo alpha > alpha
  $ echo beta > beta
  $ hg addr
  adding alpha
  adding beta
  $ hg ci -m 1

  $ cd ..
  $ hg clone test-validation test-validation-clone
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

#if reporevlogstore

Test spurious filelog entries:

  $ cd test-validation-clone
  $ echo blah >> beta
  $ cp .hg/store/data/beta.i tmp1
  $ hg ci -m 2
  $ cp .hg/store/data/beta.i tmp2
  $ hg -q rollback
  $ mv tmp2 .hg/store/data/beta.i
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'

Expected to fail:

  $ hg verify -q
   beta@1: dddc47b3ba30 not in manifests
  not checking dirstate because of previous errors
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: received spurious file revlog entry
  [255]

  $ hg -q rollback
  $ mv tmp1 .hg/store/data/beta.i
  $ echo beta > beta

Test missing filelog entries:

  $ cp .hg/store/data/beta.i tmp
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'
  $ mv tmp .hg/store/data/beta.i

Expected to fail:

  $ hg verify -q
   beta@1: manifest refers to unknown revision dddc47b3ba30
  not checking dirstate because of previous errors
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: missing file data for beta:dddc47b3ba30e54484720ce0f4f768a0f4b6efb9 - run hg verify
  [255]

  $ cd ..

#endif

Test push hook locking
=====================

  $ hg init 1

  $ echo '[ui]' >> 1/.hg/hgrc
  $ echo 'timeout = 10' >> 1/.hg/hgrc

  $ echo foo > 1/foo
  $ hg --cwd 1 ci -A -m foo
  adding foo

  $ hg clone 1 2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone 2 3
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat <<EOF > $TESTTMP/debuglocks-pretxn-hook.sh
  > hg debuglocks
  > true
  > EOF
  $ echo '[hooks]' >> 2/.hg/hgrc
  $ echo "pretxnchangegroup.a = sh $TESTTMP/debuglocks-pretxn-hook.sh" >> 2/.hg/hgrc
  $ echo 'changegroup.push = hg push -qf ../1' >> 2/.hg/hgrc

  $ echo bar >> 3/foo
  $ hg --cwd 3 ci -m bar

  $ hg --cwd 3 push ../2 --config devel.legacy.exchange=bundle1
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  lock:  user *, process * (*s) (glob)
  wlock: free
  added 1 changesets with 1 changes to 1 files

  $ hg --cwd 1 --config extensions.strip= strip tip -q
  $ hg --cwd 2 --config extensions.strip= strip tip -q
  $ hg --cwd 3 push ../2 # bundle2+
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  lock:  user *, process * (*s) (glob)
  wlock: user *, process * (*s) (glob)
  added 1 changesets with 1 changes to 1 files

Test bare push with multiple race checking options
--------------------------------------------------

  $ hg init test-bare-push-no-concurrency
  $ hg init test-bare-push-unrelated-concurrency
  $ hg -R test-revflag push -r 0 test-bare-push-no-concurrency --config server.concurrent-push-mode=strict
  pushing to test-bare-push-no-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg -R test-revflag push -r 0 test-bare-push-unrelated-concurrency --config server.concurrent-push-mode=check-related
  pushing to test-bare-push-unrelated-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg -R test-revflag push 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://fakehost|touch${IFS}owned/path'
  pushing to ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg
  [255]
  $ hg -R test-revflag push 'ssh://fakehost%7Ctouch%20owned/path'
  pushing to ssh://fakehost%7Ctouch%20owned/path
  abort: no suitable response from remote hg
  [255]

  $ [ ! -f owned ] || echo 'you got owned'

Test `commands.push.require-revs`
---------------------------------

  $ hg clone -q test-revflag test-require-revs-source
  $ hg init test-require-revs-dest
  $ cd test-require-revs-source
  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default = ../test-require-revs-dest
  > [commands]
  > push.require-revs=1
  > EOF
  $ hg push
  pushing to $TESTTMP/test-require-revs-dest
  abort: no revisions specified to push
  (did you mean "hg push -r ."?)
  [10]
  $ hg push -r 0
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg bookmark -r 0 push-this-bookmark
(test that -B (bookmark) works for specifying "revs")
  $ hg push -B push-this-bookmark
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  no changes found
  exporting bookmark push-this-bookmark
  [1]
(test that -b (branch)  works for specifying "revs")
  $ hg push -b default
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  abort: push creates new remote head [0-9a-f]+ (re)
  (merge or see 'hg help push' for details about pushing new heads)
  [20]
(demonstrate that even though we don't have anything to exchange, we're still
showing the error)
  $ hg push
  pushing to $TESTTMP/test-require-revs-dest
  abort: no revisions specified to push
  (did you mean "hg push -r ."?)
  [10]
  $ hg push --config paths.default:pushrev=0
  pushing to $TESTTMP/test-require-revs-dest
  searching for changes
  no changes found
  [1]