filelog: wrap revlog instead of inheriting it (API)
The revlog base class exposes a ton of methods. Inheriting the
revlog class for filelog will make it difficult to expose a
clean interface. There will be abstraction violations.
This commit breaks the inheritance of revlog by the filelog
class. Filelog instances now contain a reference to a revlog
instance. Various properties and methods are now proxied to
that instance.
There is precedence for doing this: manifestlog does something
similar. Although, manifestlog has a cleaner interface than
filelog. We'll get there with filelog...
The new filelog class exposes a handful of extra properties and
methods that aren't part of the declared filelog interface.
Every extra item was added in order to get a test to pass. The
set of tests that failed without these extra proxies has
significant overlap with the set of tests that don't work with
the simple store repo. There should be no surprise there.
Hopefully the hardest part about this commit to review are the
changes to bundlerepo and unionrepo. Both repository types
define a custom revlog or revlog-like class and then have a
custom filelog that inherits from both filelog and their custom
revlog. This code has been changed so the filelog types don't
inherit from revlog. Instead, they replace the revlog instance
on the created filelog. This is super hacky. I plan to fix this
in a future commit by parameterizing filelog.__init__.
Because Python function call overhead is a thing, this change
could impact performance by introducing a nearly empty proxy
function for various methods and properties. I would gladly
measure the performance impact of it, but I'm not sure what
operations have tight loops over filelog attribute lookups
or function calls. I know some of the DAG traversal code can
be sensitive about the performance of e.g. parentrevs(). However,
many of these functions are implemented on the revlog class and
therefore have direct access to self.parentrevs() and aren't
going through a proxy.
.. api::
filelog.filelog is now a standalone class and doesn't inherit
from revlog. Instead, it wraps a revlog instance at self._revlog.
This change was made in an attempt to formalize storage APIs and
prevent revlog implementation details leaking through to callers.
Differential Revision: https://phab.mercurial-scm.org/D3154
# Revision graph generator for Mercurial
#
# Copyright 2008 Dirkjan Ochtman <dirkjan@ochtman.nl>
# Copyright 2007 Joel Rosdahl <joel@rosdahl.net>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""supports walking the history as DAGs suitable for graphical output
The most basic format we use is that of::
(id, type, data, [parentids])
The node and parent ids are arbitrary integers which identify a node in the
context of the graph returned. Type is a constant specifying the node type.
Data depends on type.
"""
from __future__ import absolute_import
from .node import nullrev
from . import (
dagop,
smartset,
util,
)
CHANGESET = 'C'
PARENT = 'P'
GRANDPARENT = 'G'
MISSINGPARENT = 'M'
# Style of line to draw. None signals a line that ends and is removed at this
# point. A number prefix means only the last N characters of the current block
# will use that style, the rest will use the PARENT style. Add a - sign
# (so making N negative) and all but the first N characters use that style.
EDGES = {PARENT: '|', GRANDPARENT: ':', MISSINGPARENT: None}
def dagwalker(repo, revs):
"""cset DAG generator yielding (id, CHANGESET, ctx, [parentinfo]) tuples
This generator function walks through revisions (which should be ordered
from bigger to lower). It returns a tuple for each node.
Each parentinfo entry is a tuple with (edgetype, parentid), where edgetype
is one of PARENT, GRANDPARENT or MISSINGPARENT. The node and parent ids
are arbitrary integers which identify a node in the context of the graph
returned.
"""
gpcache = {}
for rev in revs:
ctx = repo[rev]
# partition into parents in the rev set and missing parents, then
# augment the lists with markers, to inform graph drawing code about
# what kind of edge to draw between nodes.
pset = set(p.rev() for p in ctx.parents() if p.rev() in revs)
mpars = [p.rev() for p in ctx.parents()
if p.rev() != nullrev and p.rev() not in pset]
parents = [(PARENT, p) for p in sorted(pset)]
for mpar in mpars:
gp = gpcache.get(mpar)
if gp is None:
# precompute slow query as we know reachableroots() goes
# through all revs (issue4782)
if not isinstance(revs, smartset.baseset):
revs = smartset.baseset(revs)
gp = gpcache[mpar] = sorted(set(dagop.reachableroots(
repo, revs, [mpar])))
if not gp:
parents.append((MISSINGPARENT, mpar))
pset.add(mpar)
else:
parents.extend((GRANDPARENT, g) for g in gp if g not in pset)
pset.update(gp)
yield (ctx.rev(), CHANGESET, ctx, parents)
def nodes(repo, nodes):
"""cset DAG generator yielding (id, CHANGESET, ctx, [parentids]) tuples
This generator function walks the given nodes. It only returns parents
that are in nodes, too.
"""
include = set(nodes)
for node in nodes:
ctx = repo[node]
parents = set((PARENT, p.rev()) for p in ctx.parents()
if p.node() in include)
yield (ctx.rev(), CHANGESET, ctx, sorted(parents))
def colored(dag, repo):
"""annotates a DAG with colored edge information
For each DAG node this function emits tuples::
(id, type, data, (col, color), [(col, nextcol, color)])
with the following new elements:
- Tuple (col, color) with column and color index for the current node
- A list of tuples indicating the edges between the current node and its
parents.
"""
seen = []
colors = {}
newcolor = 1
config = {}
for key, val in repo.ui.configitems('graph'):
if '.' in key:
branch, setting = key.rsplit('.', 1)
# Validation
if setting == "width" and val.isdigit():
config.setdefault(branch, {})[setting] = int(val)
elif setting == "color" and val.isalnum():
config.setdefault(branch, {})[setting] = val
if config:
getconf = util.lrucachefunc(
lambda rev: config.get(repo[rev].branch(), {}))
else:
getconf = lambda rev: {}
for (cur, type, data, parents) in dag:
# Compute seen and next
if cur not in seen:
seen.append(cur) # new head
colors[cur] = newcolor
newcolor += 1
col = seen.index(cur)
color = colors.pop(cur)
next = seen[:]
# Add parents to next
addparents = [p for pt, p in parents if p not in next]
next[col:col + 1] = addparents
# Set colors for the parents
for i, p in enumerate(addparents):
if not i:
colors[p] = color
else:
colors[p] = newcolor
newcolor += 1
# Add edges to the graph
edges = []
for ecol, eid in enumerate(seen):
if eid in next:
bconf = getconf(eid)
edges.append((
ecol, next.index(eid), colors[eid],
bconf.get('width', -1),
bconf.get('color', '')))
elif eid == cur:
for ptype, p in parents:
bconf = getconf(p)
edges.append((
ecol, next.index(p), color,
bconf.get('width', -1),
bconf.get('color', '')))
# Yield and move on
yield (cur, type, data, (col, color), edges)
seen = next
def asciiedges(type, char, state, rev, parents):
"""adds edge info to changelog DAG walk suitable for ascii()"""
seen = state['seen']
if rev not in seen:
seen.append(rev)
nodeidx = seen.index(rev)
knownparents = []
newparents = []
for ptype, parent in parents:
if parent == rev:
# self reference (should only be seen in null rev)
continue
if parent in seen:
knownparents.append(parent)
else:
newparents.append(parent)
state['edges'][parent] = state['styles'].get(ptype, '|')
ncols = len(seen)
width = 1 + ncols * 2
nextseen = seen[:]
nextseen[nodeidx:nodeidx + 1] = newparents
edges = [(nodeidx, nextseen.index(p)) for p in knownparents]
seen[:] = nextseen
while len(newparents) > 2:
# ascii() only knows how to add or remove a single column between two
# calls. Nodes with more than two parents break this constraint so we
# introduce intermediate expansion lines to grow the active node list
# slowly.
edges.append((nodeidx, nodeidx))
edges.append((nodeidx, nodeidx + 1))
nmorecols = 1
width += 2
yield (type, char, width, (nodeidx, edges, ncols, nmorecols))
char = '\\'
nodeidx += 1
ncols += 1
edges = []
del newparents[0]
if len(newparents) > 0:
edges.append((nodeidx, nodeidx))
if len(newparents) > 1:
edges.append((nodeidx, nodeidx + 1))
nmorecols = len(nextseen) - ncols
if nmorecols > 0:
width += 2
# remove current node from edge characters, no longer needed
state['edges'].pop(rev, None)
yield (type, char, width, (nodeidx, edges, ncols, nmorecols))
def _fixlongrightedges(edges):
for (i, (start, end)) in enumerate(edges):
if end > start:
edges[i] = (start, end + 1)
def _getnodelineedgestail(
echars, idx, pidx, ncols, coldiff, pdiff, fix_tail):
if fix_tail and coldiff == pdiff and coldiff != 0:
# Still going in the same non-vertical direction.
if coldiff == -1:
start = max(idx + 1, pidx)
tail = echars[idx * 2:(start - 1) * 2]
tail.extend(["/", " "] * (ncols - start))
return tail
else:
return ["\\", " "] * (ncols - idx - 1)
else:
remainder = (ncols - idx - 1)
return echars[-(remainder * 2):] if remainder > 0 else []
def _drawedges(echars, edges, nodeline, interline):
for (start, end) in edges:
if start == end + 1:
interline[2 * end + 1] = "/"
elif start == end - 1:
interline[2 * start + 1] = "\\"
elif start == end:
interline[2 * start] = echars[2 * start]
else:
if 2 * end >= len(nodeline):
continue
nodeline[2 * end] = "+"
if start > end:
(start, end) = (end, start)
for i in range(2 * start + 1, 2 * end):
if nodeline[i] != "+":
nodeline[i] = "-"
def _getpaddingline(echars, idx, ncols, edges):
# all edges up to the current node
line = echars[:idx * 2]
# an edge for the current node, if there is one
if (idx, idx - 1) in edges or (idx, idx) in edges:
# (idx, idx - 1) (idx, idx)
# | | | | | | | |
# +---o | | o---+
# | | X | | X | |
# | |/ / | |/ /
# | | | | | |
line.extend(echars[idx * 2:(idx + 1) * 2])
else:
line.extend([' ', ' '])
# all edges to the right of the current node
remainder = ncols - idx - 1
if remainder > 0:
line.extend(echars[-(remainder * 2):])
return line
def _drawendinglines(lines, extra, edgemap, seen):
"""Draw ending lines for missing parent edges
None indicates an edge that ends at between this node and the next
Replace with a short line ending in ~ and add / lines to any edges to
the right.
"""
if None not in edgemap.values():
return
# Check for more edges to the right of our ending edges.
# We need enough space to draw adjustment lines for these.
edgechars = extra[::2]
while edgechars and edgechars[-1] is None:
edgechars.pop()
shift_size = max((edgechars.count(None) * 2) - 1, 0)
while len(lines) < 3 + shift_size:
lines.append(extra[:])
if shift_size:
empties = []
toshift = []
first_empty = extra.index(None)
for i, c in enumerate(extra[first_empty::2], first_empty // 2):
if c is None:
empties.append(i * 2)
else:
toshift.append(i * 2)
targets = list(range(first_empty, first_empty + len(toshift) * 2, 2))
positions = toshift[:]
for line in lines[-shift_size:]:
line[first_empty:] = [' '] * (len(line) - first_empty)
for i in range(len(positions)):
pos = positions[i] - 1
positions[i] = max(pos, targets[i])
line[pos] = '/' if pos > targets[i] else extra[toshift[i]]
map = {1: '|', 2: '~'}
for i, line in enumerate(lines):
if None not in line:
continue
line[:] = [c or map.get(i, ' ') for c in line]
# remove edges that ended
remove = [p for p, c in edgemap.items() if c is None]
for parent in remove:
del edgemap[parent]
seen.remove(parent)
def asciistate():
"""returns the initial value for the "state" argument to ascii()"""
return {
'seen': [],
'edges': {},
'lastcoldiff': 0,
'lastindex': 0,
'styles': EDGES.copy(),
'graphshorten': False,
}
def ascii(ui, state, type, char, text, coldata):
"""prints an ASCII graph of the DAG
takes the following arguments (one call per node in the graph):
- ui to write to
- Somewhere to keep the needed state in (init to asciistate())
- Column of the current node in the set of ongoing edges.
- Type indicator of node data, usually 'C' for changesets.
- Payload: (char, lines):
- Character to use as node's symbol.
- List of lines to display as the node's text.
- Edges; a list of (col, next_col) indicating the edges between
the current node and its parents.
- Number of columns (ongoing edges) in the current revision.
- The difference between the number of columns (ongoing edges)
in the next revision and the number of columns (ongoing edges)
in the current revision. That is: -1 means one column removed;
0 means no columns added or removed; 1 means one column added.
"""
idx, edges, ncols, coldiff = coldata
assert -2 < coldiff < 2
edgemap, seen = state['edges'], state['seen']
# Be tolerant of history issues; make sure we have at least ncols + coldiff
# elements to work with. See test-glog.t for broken history test cases.
echars = [c for p in seen for c in (edgemap.get(p, '|'), ' ')]
echars.extend(('|', ' ') * max(ncols + coldiff - len(seen), 0))
if coldiff == -1:
# Transform
#
# | | | | | |
# o | | into o---+
# |X / |/ /
# | | | |
_fixlongrightedges(edges)
# add_padding_line says whether to rewrite
#
# | | | | | | | |
# | o---+ into | o---+
# | / / | | | # <--- padding line
# o | | | / /
# o | |
add_padding_line = (len(text) > 2 and coldiff == -1 and
[x for (x, y) in edges if x + 1 < y])
# fix_nodeline_tail says whether to rewrite
#
# | | o | | | | o | |
# | | |/ / | | |/ /
# | o | | into | o / / # <--- fixed nodeline tail
# | |/ / | |/ /
# o | | o | |
fix_nodeline_tail = len(text) <= 2 and not add_padding_line
# nodeline is the line containing the node character (typically o)
nodeline = echars[:idx * 2]
nodeline.extend([char, " "])
nodeline.extend(
_getnodelineedgestail(
echars, idx, state['lastindex'], ncols, coldiff,
state['lastcoldiff'], fix_nodeline_tail))
# shift_interline is the line containing the non-vertical
# edges between this entry and the next
shift_interline = echars[:idx * 2]
for i in xrange(2 + coldiff):
shift_interline.append(' ')
count = ncols - idx - 1
if coldiff == -1:
for i in xrange(count):
shift_interline.extend(['/', ' '])
elif coldiff == 0:
shift_interline.extend(echars[(idx + 1) * 2:ncols * 2])
else:
for i in xrange(count):
shift_interline.extend(['\\', ' '])
# draw edges from the current node to its parents
_drawedges(echars, edges, nodeline, shift_interline)
# lines is the list of all graph lines to print
lines = [nodeline]
if add_padding_line:
lines.append(_getpaddingline(echars, idx, ncols, edges))
# If 'graphshorten' config, only draw shift_interline
# when there is any non vertical flow in graph.
if state['graphshorten']:
if any(c in '\/' for c in shift_interline if c):
lines.append(shift_interline)
# Else, no 'graphshorten' config so draw shift_interline.
else:
lines.append(shift_interline)
# make sure that there are as many graph lines as there are
# log strings
extra_interline = echars[:(ncols + coldiff) * 2]
if len(lines) < len(text):
while len(lines) < len(text):
lines.append(extra_interline[:])
_drawendinglines(lines, extra_interline, edgemap, seen)
while len(text) < len(lines):
text.append("")
if any(len(char) > 1 for char in edgemap.values()):
# limit drawing an edge to the first or last N lines of the current
# section the rest of the edge is drawn like a parent line.
parent = state['styles'][PARENT][-1:]
def _drawgp(char, i):
# should a grandparent character be drawn for this line?
if len(char) < 2:
return True
num = int(char[:-1])
# either skip first num lines or take last num lines, based on sign
return -num <= i if num < 0 else (len(lines) - i) <= num
for i, line in enumerate(lines):
line[:] = [c[-1:] if _drawgp(c, i) else parent for c in line]
edgemap.update(
(e, (c if len(c) < 2 else parent)) for e, c in edgemap.items())
# print lines
indentation_level = max(ncols, ncols + coldiff)
for (line, logstr) in zip(lines, text):
ln = "%-*s %s" % (2 * indentation_level, "".join(line), logstr)
ui.write(ln.rstrip() + '\n')
# ... and start over
state['lastcoldiff'] = coldiff
state['lastindex'] = idx