windows: use normalized path as path to subrepo
path to subrepo is used to identify or check location of subrepo.
it should be normalized (in "/" delimiter form), because it is also
used with narrowmatcher which uses only normalized path even on
Windows environment.
this patch applies "util.pconvert()" on path to subrepo (called
"subpath") to normalize it.
for this patch, referers of below were checked.
- subrepo.state()
- subrepo.itersubrepos()
- subrepo.subrepo()
- context.sub()
- context.substate()
typical usecase is:
for subpath in ctx.substate:
sub = ctx.sub(subpath)
... ctx.substate[subpath] ....
in this case, normalization has no side effect, because keys given
from substate are used as key itself.
other cases shown below also seem to require subpath to be normalized.
- path components are joined by "/", in "commands.forget()":
for subpath in ctx.substate:
subforget[subpath + '/' + fsub] = (fsub, sub)
- normalized "file" is used to check below condition, in
"commands.revert()", "localrepository.commit()", and
"localrepository._checknested()"
file in ctx.substate
- substate.keys() is passed to dirstate.walk()/status() which use
only normalized pathes
$ "$TESTDIR/hghave" git || exit 80
$ echo "[extensions]" >> $HGRCPATH
$ echo "convert=" >> $HGRCPATH
$ echo 'hgext.graphlog =' >> $HGRCPATH
$ GIT_AUTHOR_NAME='test'; export GIT_AUTHOR_NAME
$ GIT_AUTHOR_EMAIL='test@example.org'; export GIT_AUTHOR_EMAIL
$ GIT_AUTHOR_DATE="2007-01-01 00:00:00 +0000"; export GIT_AUTHOR_DATE
$ GIT_COMMITTER_NAME="$GIT_AUTHOR_NAME"; export GIT_COMMITTER_NAME
$ GIT_COMMITTER_EMAIL="$GIT_AUTHOR_EMAIL"; export GIT_COMMITTER_EMAIL
$ GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"; export GIT_COMMITTER_DATE
$ count=10
$ commit()
> {
> GIT_AUTHOR_DATE="2007-01-01 00:00:$count +0000"
> GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"
> git commit "$@" >/dev/null 2>/dev/null || echo "git commit error"
> count=`expr $count + 1`
> }
$ mkdir git-repo
$ cd git-repo
$ git init-db >/dev/null 2>/dev/null
$ echo a > a
$ mkdir d
$ echo b > d/b
$ git add a d
$ commit -a -m t1
Remove the directory, then try to replace it with a file
(issue 754)
$ git rm -f d/b
rm 'd/b'
$ commit -m t2
$ echo d > d
$ git add d
$ commit -m t3
$ echo b >> a
$ commit -a -m t4.1
$ git checkout -b other HEAD~ >/dev/null 2>/dev/null
$ echo c > a
$ echo a >> a
$ commit -a -m t4.2
$ git checkout master >/dev/null 2>/dev/null
$ git pull --no-commit . other > /dev/null 2>/dev/null
$ commit -m 'Merge branch other'
$ cd ..
$ hg convert --datesort git-repo
assuming destination git-repo-hg
initializing destination git-repo-hg repository
scanning source...
sorting...
converting...
5 t1
4 t2
3 t3
2 t4.1
1 t4.2
0 Merge branch other
updating bookmarks
$ hg up -q -R git-repo-hg
$ hg -R git-repo-hg tip -v
changeset: 5:c78094926be2
bookmark: master
tag: tip
parent: 3:f5f5cb45432b
parent: 4:4e174f80c67c
user: test <test@example.org>
date: Mon Jan 01 00:00:15 2007 +0000
files: a
description:
Merge branch other
$ count=10
$ mkdir git-repo2
$ cd git-repo2
$ git init-db >/dev/null 2>/dev/null
$ echo foo > foo
$ git add foo
$ commit -a -m 'add foo'
$ echo >> foo
$ commit -a -m 'change foo'
$ git checkout -b Bar HEAD~ >/dev/null 2>/dev/null
$ echo quux >> quux
$ git add quux
$ commit -a -m 'add quux'
$ echo bar > bar
$ git add bar
$ commit -a -m 'add bar'
$ git checkout -b Baz HEAD~ >/dev/null 2>/dev/null
$ echo baz > baz
$ git add baz
$ commit -a -m 'add baz'
$ git checkout master >/dev/null 2>/dev/null
$ git pull --no-commit . Bar Baz > /dev/null 2>/dev/null
$ commit -m 'Octopus merge'
$ echo bar >> bar
$ commit -a -m 'change bar'
$ git checkout -b Foo HEAD~ >/dev/null 2>/dev/null
$ echo >> foo
$ commit -a -m 'change foo'
$ git checkout master >/dev/null 2>/dev/null
$ git pull --no-commit -s ours . Foo > /dev/null 2>/dev/null
$ commit -m 'Discard change to foo'
$ cd ..
$ glog()
> {
> hg glog --template '{rev} "{desc|firstline}" files: {files}\n' "$@"
> }
$ splitrepo()
> {
> msg="$1"
> files="$2"
> opts=$3
> echo "% $files: $msg"
> prefix=`echo "$files" | sed -e 's/ /-/g'`
> fmap="$prefix.fmap"
> repo="$prefix.repo"
> for i in $files; do
> echo "include $i" >> "$fmap"
> done
> hg -q convert $opts --filemap "$fmap" --datesort git-repo2 "$repo"
> hg up -q -R "$repo"
> glog -R "$repo"
> hg -R "$repo" manifest --debug
> }
full conversion
$ hg -q convert --datesort git-repo2 fullrepo
$ hg up -q -R fullrepo
$ glog -R fullrepo
@ 9 "Discard change to foo" files: foo
|\
| o 8 "change foo" files: foo
| |
o | 7 "change bar" files: bar
|/
o 6 "(octopus merge fixup)" files:
|\
| o 5 "Octopus merge" files: baz
| |\
o | | 4 "add baz" files: baz
| | |
+---o 3 "add bar" files: bar
| |
o | 2 "add quux" files: quux
| |
| o 1 "change foo" files: foo
|/
o 0 "add foo" files: foo
$ hg -R fullrepo manifest --debug
245a3b8bc653999c2b22cdabd517ccb47aecafdf 644 bar
354ae8da6e890359ef49ade27b68bbc361f3ca88 644 baz
9277c9cc8dd4576fc01a17939b4351e5ada93466 644 foo
88dfeab657e8cf2cef3dec67b914f49791ae76b1 644 quux
$ splitrepo 'octopus merge' 'foo bar baz'
% foo bar baz: octopus merge
@ 8 "Discard change to foo" files: foo
|\
| o 7 "change foo" files: foo
| |
o | 6 "change bar" files: bar
|/
o 5 "(octopus merge fixup)" files:
|\
| o 4 "Octopus merge" files: baz
| |\
o | | 3 "add baz" files: baz
| | |
+---o 2 "add bar" files: bar
| |
| o 1 "change foo" files: foo
|/
o 0 "add foo" files: foo
245a3b8bc653999c2b22cdabd517ccb47aecafdf 644 bar
354ae8da6e890359ef49ade27b68bbc361f3ca88 644 baz
9277c9cc8dd4576fc01a17939b4351e5ada93466 644 foo
$ splitrepo 'only some parents of an octopus merge; "discard" a head' 'foo baz quux'
% foo baz quux: only some parents of an octopus merge; "discard" a head
@ 6 "Discard change to foo" files: foo
|
o 5 "change foo" files: foo
|
o 4 "Octopus merge" files:
|\
| o 3 "add baz" files: baz
| |
| o 2 "add quux" files: quux
| |
o | 1 "change foo" files: foo
|/
o 0 "add foo" files: foo
354ae8da6e890359ef49ade27b68bbc361f3ca88 644 baz
9277c9cc8dd4576fc01a17939b4351e5ada93466 644 foo
88dfeab657e8cf2cef3dec67b914f49791ae76b1 644 quux
test binary conversion (issue 1359)
$ mkdir git-repo3
$ cd git-repo3
$ git init-db >/dev/null 2>/dev/null
$ python -c 'file("b", "wb").write("".join([chr(i) for i in range(256)])*16)'
$ git add b
$ commit -a -m addbinary
$ cd ..
convert binary file
$ hg convert git-repo3 git-repo3-hg
initializing destination git-repo3-hg repository
scanning source...
sorting...
converting...
0 addbinary
updating bookmarks
$ cd git-repo3-hg
$ hg up -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ python -c 'print len(file("b", "rb").read())'
4096
$ cd ..
test author vs committer
$ mkdir git-repo4
$ cd git-repo4
$ git init-db >/dev/null 2>/dev/null
$ echo >> foo
$ git add foo
$ commit -a -m addfoo
$ echo >> foo
$ GIT_AUTHOR_NAME="nottest"
$ commit -a -m addfoo2
$ cd ..
convert author committer
$ hg convert git-repo4 git-repo4-hg
initializing destination git-repo4-hg repository
scanning source...
sorting...
converting...
1 addfoo
0 addfoo2
updating bookmarks
$ hg -R git-repo4-hg log -v
changeset: 1:d63e967f93da
bookmark: master
tag: tip
user: nottest <test@example.org>
date: Mon Jan 01 00:00:21 2007 +0000
files: foo
description:
addfoo2
committer: test <test@example.org>
changeset: 0:0735477b0224
user: test <test@example.org>
date: Mon Jan 01 00:00:20 2007 +0000
files: foo
description:
addfoo
--sourceorder should fail
$ hg convert --sourcesort git-repo4 git-repo4-sourcesort-hg
initializing destination git-repo4-sourcesort-hg repository
abort: --sourcesort is not supported by this data source
[255]
damage git repository and convert again
$ cat > damage.py <<EOF
> import os
> for root, dirs, files in os.walk('git-repo4/.git/objects'):
> if files:
> path = os.path.join(root, files[0])
> os.remove(path)
> break
> EOF
$ python damage.py
$ hg convert git-repo4 git-repo4-broken-hg 2>&1 | \
> grep 'abort:' | sed 's/abort:.*/abort:/g'
abort: