view doc/check-seclevel.py @ 27934:1779ff7426c9 stable

hgweb: update canvas.width before dynamically redrawing graph (issue2683)

After 91ac8cb79125 graph canvas width is decided once on the initial rendering.
However, after graph page gets scrolled down to load more, it might need more
horizontal space to draw, so it needs to resize the canvas dynamically.

The exact problem that this patch solves can be seen using:

    hg init testfork
    cd testfork
    echo 0 > foo
    hg ci -Am0
    echo 1 > foo
    hg ci -m1
    hg up 0
    echo 2 > foo
    hg ci -m2
    hg gl -T '{rev}\n'

    @  2
    |
    | o  1
    |/
    o  0

    hg serve

And then by navigating to http://127.0.0.1:8000/graph/tip?revcount=1

"revcount=1" makes sure the initial graph contains only revision 2. And because
the initial canvas width takes only that one revision into count, after the
(immediate) AJAX update revision 1 will be cut off from the graph.

We can safely set canvas width to the new value we get from the AJAX request
because every time graph is updated, it is completely redrawn using all the
requested nodes (in the case above it will use /graph/2?revcount=61), so the
value is guaranteed not to decrease.

P.S.: Sorry for parsing HTML with regexes, but I didn't start it.

#!/usr/bin/env python
#
# checkseclevel - checking section title levels in each online help document

import sys, os
import optparse

# import from the live mercurial repo
os.environ['HGMODULEPOLICY'] = 'py'
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
from mercurial.commands import table
from mercurial.help import helptable
from mercurial import extensions
from mercurial import minirst
from mercurial import ui as uimod

level2mark = ['"', '=', '-', '.', '#']
reservedmarks = ['"']

mark2level = {}
for m, l in zip(level2mark, xrange(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3

def showavailables(ui, initlevel):
    ui.warn(('    available marks and order of them in this help: %s\n') %
            (', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1:]])))

def checkseclevel(ui, doc, name, initlevel):
    ui.note(('checking "%s"\n') % name)
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block['type'] != 'section':
            continue
        mark = block['underline']
        title = block['lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            ui.warn(('invalid section mark %r for "%s" of %s\n') %
                    (mark * 4, title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            ui.warn(('gap of section level at "%s" of %s\n') %
                    (title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        ui.note(('appropriate section level for "%s %s"\n') %
                (mark * (nextlevel * 2), title))
        curlevel = nextlevel

    return errorcnt

def checkcmdtable(ui, cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split("|")[0].lstrip("^")
        if not entry[0].__doc__:
            ui.note(('skip checking %s: no help document\n') %
                    (namefmt % name))
            continue
        errorcnt += checkseclevel(ui, entry[0].__doc__,
                                  namefmt % name,
                                  initlevel)
    return errorcnt

def checkhghelps(ui):
    errorcnt = 0
    for names, sec, doc in helptable:
        if callable(doc):
            doc = doc(ui)
        errorcnt += checkseclevel(ui, doc,
                                  '%s help topic' % names[0],
                                  initlevel_topic)

    errorcnt += checkcmdtable(ui, table, '%s command', initlevel_cmd)

    for name in sorted(extensions.enabled().keys() +
                       extensions.disabled().keys()):
        mod = extensions.load(ui, name, None)
        if not mod.__doc__:
            ui.note(('skip checking %s extension: no help document\n') % name)
            continue
        errorcnt += checkseclevel(ui, mod.__doc__,
                                  '%s extension' % name,
                                  initlevel_ext)

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(ui, cmdtable,
                                      '%s command of ' + name + ' extension',
                                      initlevel_ext_cmd)
    return errorcnt

def checkfile(ui, filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        with open(filename) as fp:
            doc = fp.read()

    ui.note(('checking input from %s with initlevel %d\n') %
            (filename, initlevel))
    return checkseclevel(ui, doc, 'input from %s' % filename, initlevel)

def main():
    optparser = optparse.OptionParser("""%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
""")
    optparser.add_option("-v", "--verbose",
                         help="enable additional output",
                         action="store_true")
    optparser.add_option("-d", "--debug",
                         help="debug mode",
                         action="store_true")
    optparser.add_option("-f", "--file",
                         help="filename to read in (or '-' for stdin)",
                         action="store", default="")

    optparser.add_option("-t", "--topic",
                         help="parse file as help topic",
                         action="store_const", dest="initlevel", const=0)
    optparser.add_option("-c", "--command",
                         help="parse file as help of core command",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-e", "--extension",
                         help="parse file as help of extension",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-C", "--extension-command",
                         help="parse file as help of extension command",
                         action="store_const", dest="initlevel", const=3)

    optparser.add_option("-l", "--initlevel",
                         help="set initial section level manually",
                         action="store", type="int", default=0)

    (options, args) = optparser.parse_args()

    ui = uimod.ui()
    ui.setconfig('ui', 'verbose', options.verbose, '--verbose')
    ui.setconfig('ui', 'debug', options.debug, '--debug')

    if options.file:
        if checkfile(ui, options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps(ui):
            sys.exit(1)

if __name__ == "__main__":
    main()