Mercurial > hg
view mercurial/dispatch.py @ 50757:19108906abaf stable
extensions: imp module is removed in Python 3.12 - use importlib to load files
imp has been deprecated for a long time, and has finally been removed in Python
3.12 .
imp was only used for loading extensions that has been specified with direct
.py path or path to a package directory. The same use cases can be achieved
quite simple with importlib, , possiby with small changes in corner cases with
undefined behaviour, such as extensions without .py source.
There might also be corner cases and undefined behaviour around use of
sys.modules and reloading.
author | Mads Kiilerich <mads@kiilerich.com> |
---|---|
date | Wed, 28 Jun 2023 14:23:13 +0200 |
parents | 9a322ccd2fdc |
children | d718eddf01d9 |
line wrap: on
line source
# dispatch.py - command dispatching for mercurial # # Copyright 2005-2007 Olivia Mackall <olivia@selenic.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. import errno import getopt import io import os import pdb import re import signal import sys import traceback from .i18n import _ from .pycompat import getattr from hgdemandimport import tracing from . import ( cmdutil, color, commands, demandimport, encoding, error, extensions, fancyopts, help, hg, hook, localrepo, profiling, pycompat, rcutil, registrar, requirements as requirementsmod, scmutil, ui as uimod, util, vfs, ) from .utils import ( procutil, stringutil, urlutil, ) class request: def __init__( self, args, ui=None, repo=None, fin=None, fout=None, ferr=None, fmsg=None, prereposetups=None, ): self.args = args self.ui = ui self.repo = repo # input/output/error streams self.fin = fin self.fout = fout self.ferr = ferr # separate stream for status/error messages self.fmsg = fmsg # remember options pre-parsed by _earlyparseopts() self.earlyoptions = {} # reposetups which run before extensions, useful for chg to pre-fill # low-level repo state (for example, changelog) before extensions. self.prereposetups = prereposetups or [] # store the parsed and canonical command self.canonical_command = None def _runexithandlers(self): exc = None handlers = self.ui._exithandlers try: while handlers: func, args, kwargs = handlers.pop() try: func(*args, **kwargs) except: # re-raises below if exc is None: exc = sys.exc_info()[1] self.ui.warnnoi18n(b'error in exit handlers:\n') self.ui.traceback(force=True) finally: if exc is not None: raise exc def _flushstdio(ui, err): status = None # In all cases we try to flush stdio streams. if util.safehasattr(ui, 'fout'): assert ui is not None # help pytype assert ui.fout is not None # help pytype try: ui.fout.flush() except IOError as e: err = e status = -1 if util.safehasattr(ui, 'ferr'): assert ui is not None # help pytype assert ui.ferr is not None # help pytype try: if err is not None and err.errno != errno.EPIPE: ui.ferr.write( b'abort: %s\n' % encoding.strtolocal(err.strerror) ) ui.ferr.flush() # There's not much we can do about an I/O error here. So (possibly) # change the status code and move on. except IOError: status = -1 return status def run(): """run the command in sys.argv""" try: initstdio() with tracing.log('parse args into request'): req = request(pycompat.sysargv[1:]) status = dispatch(req) _silencestdio() except KeyboardInterrupt: # Catch early/late KeyboardInterrupt as last ditch. Here nothing will # be printed to console to avoid another IOError/KeyboardInterrupt. status = -1 sys.exit(status & 255) def initstdio(): # stdio streams on Python 3 are io.TextIOWrapper instances proxying another # buffer. These streams will normalize \n to \r\n by default. Mercurial's # preferred mechanism for writing output (ui.write()) uses io.BufferedWriter # instances, which write to the underlying stdio file descriptor in binary # mode. ui.write() uses \n for line endings and no line ending normalization # is attempted through this interface. This "just works," even if the system # preferred line ending is not \n. # # But some parts of Mercurial (e.g. hooks) can still send data to sys.stdout # and sys.stderr. They will inherit the line ending normalization settings, # potentially causing e.g. \r\n to be emitted. Since emitting \n should # "just work," here we change the sys.* streams to disable line ending # normalization, ensuring compatibility with our ui type. if sys.stdout is not None: # write_through is new in Python 3.7. kwargs = { "newline": "\n", "line_buffering": sys.stdout.line_buffering, } if util.safehasattr(sys.stdout, "write_through"): # pytype: disable=attribute-error kwargs["write_through"] = sys.stdout.write_through # pytype: enable=attribute-error sys.stdout = io.TextIOWrapper( sys.stdout.buffer, sys.stdout.encoding, sys.stdout.errors, **kwargs ) if sys.stderr is not None: kwargs = { "newline": "\n", "line_buffering": sys.stderr.line_buffering, } if util.safehasattr(sys.stderr, "write_through"): # pytype: disable=attribute-error kwargs["write_through"] = sys.stderr.write_through # pytype: enable=attribute-error sys.stderr = io.TextIOWrapper( sys.stderr.buffer, sys.stderr.encoding, sys.stderr.errors, **kwargs ) if sys.stdin is not None: # No write_through on read-only stream. sys.stdin = io.TextIOWrapper( sys.stdin.buffer, sys.stdin.encoding, sys.stdin.errors, # None is universal newlines mode. newline=None, line_buffering=sys.stdin.line_buffering, ) def _silencestdio(): for fp in (sys.stdout, sys.stderr): if fp is None: continue # Check if the file is okay try: fp.flush() continue except IOError: pass # Otherwise mark it as closed to silence "Exception ignored in" # message emitted by the interpreter finalizer. try: fp.close() except IOError: pass def _formatargs(args): return b' '.join(procutil.shellquote(a) for a in args) def dispatch(req): """run the command specified in req.args; returns an integer status code""" err = None try: status = _rundispatch(req) except error.StdioError as e: err = e status = -1 ret = _flushstdio(req.ui, err) if ret and not status: status = ret return status def _rundispatch(req): with tracing.log('dispatch._rundispatch'): if req.ferr: ferr = req.ferr elif req.ui: ferr = req.ui.ferr else: ferr = procutil.stderr try: if not req.ui: req.ui = uimod.ui.load() req.earlyoptions.update(_earlyparseopts(req.ui, req.args)) if req.earlyoptions[b'traceback']: req.ui.setconfig(b'ui', b'traceback', b'on', b'--traceback') # set ui streams from the request if req.fin: req.ui.fin = req.fin if req.fout: req.ui.fout = req.fout if req.ferr: req.ui.ferr = req.ferr if req.fmsg: req.ui.fmsg = req.fmsg except error.Abort as inst: ferr.write(inst.format()) return -1 formattedargs = _formatargs(req.args) starttime = util.timer() ret = 1 # default of Python exit code on unhandled exception try: ret = _runcatch(req) or 0 except error.ProgrammingError as inst: req.ui.error(_(b'** ProgrammingError: %s\n') % inst) if inst.hint: req.ui.error(_(b'** (%s)\n') % inst.hint) raise except KeyboardInterrupt as inst: try: if isinstance(inst, error.SignalInterrupt): msg = _(b"killed!\n") else: msg = _(b"interrupted!\n") req.ui.error(msg) except error.SignalInterrupt: # maybe pager would quit without consuming all the output, and # SIGPIPE was raised. we cannot print anything in this case. pass except BrokenPipeError: pass ret = -1 finally: duration = util.timer() - starttime req.ui.flush() # record blocked times if req.ui.logblockedtimes: req.ui._blockedtimes[b'command_duration'] = duration * 1000 req.ui.log( b'uiblocked', b'ui blocked ms\n', **pycompat.strkwargs(req.ui._blockedtimes) ) return_code = ret & 255 req.ui.log( b"commandfinish", b"%s exited %d after %0.2f seconds\n", formattedargs, return_code, duration, return_code=return_code, duration=duration, canonical_command=req.canonical_command, ) try: req._runexithandlers() except: # exiting, so no re-raises ret = ret or -1 # do flush again since ui.log() and exit handlers may write to ui req.ui.flush() return ret def _runcatch(req): with tracing.log('dispatch._runcatch'): def catchterm(*args): raise error.SignalInterrupt ui = req.ui try: for name in 'SIGBREAK', 'SIGHUP', 'SIGTERM': num = getattr(signal, name, None) if num: signal.signal(num, catchterm) except ValueError: pass # happens if called in a thread def _runcatchfunc(): realcmd = None try: cmdargs = fancyopts.fancyopts( req.args[:], commands.globalopts, {} ) cmd = cmdargs[0] aliases, entry = cmdutil.findcmd(cmd, commands.table, False) realcmd = aliases[0] except ( error.UnknownCommand, error.AmbiguousCommand, IndexError, getopt.GetoptError, ): # Don't handle this here. We know the command is # invalid, but all we're worried about for now is that # it's not a command that server operators expect to # be safe to offer to users in a sandbox. pass if realcmd == b'serve' and b'--stdio' in cmdargs: # We want to constrain 'hg serve --stdio' instances pretty # closely, as many shared-ssh access tools want to grant # access to run *only* 'hg -R $repo serve --stdio'. We # restrict to exactly that set of arguments, and prohibit # any repo name that starts with '--' to prevent # shenanigans wherein a user does something like pass # --debugger or --config=ui.debugger=1 as a repo # name. This used to actually run the debugger. nbargs = 4 hashiddenaccess = b'--hidden' in cmdargs if hashiddenaccess: nbargs += 1 if ( len(req.args) != nbargs or req.args[0] != b'-R' or req.args[1].startswith(b'--') or req.args[2] != b'serve' or req.args[3] != b'--stdio' or hashiddenaccess and req.args[4] != b'--hidden' ): raise error.Abort( _(b'potentially unsafe serve --stdio invocation: %s') % (stringutil.pprint(req.args),) ) try: debugger = b'pdb' debugtrace = {b'pdb': pdb.set_trace} debugmortem = {b'pdb': pdb.post_mortem} # read --config before doing anything else # (e.g. to change trust settings for reading .hg/hgrc) cfgs = _parseconfig(req.ui, req.earlyoptions[b'config']) if req.repo: # copy configs that were passed on the cmdline (--config) to # the repo ui for sec, name, val in cfgs: req.repo.ui.setconfig( sec, name, val, source=b'--config' ) # developer config: ui.debugger debugger = ui.config(b"ui", b"debugger") debugmod = pdb if not debugger or ui.plain(): # if we are in HGPLAIN mode, then disable custom debugging debugger = b'pdb' elif req.earlyoptions[b'debugger']: # This import can be slow for fancy debuggers, so only # do it when absolutely necessary, i.e. when actual # debugging has been requested with demandimport.deactivated(): try: debugmod = __import__(debugger) except ImportError: pass # Leave debugmod = pdb debugtrace[debugger] = debugmod.set_trace debugmortem[debugger] = debugmod.post_mortem # enter the debugger before command execution if req.earlyoptions[b'debugger']: ui.warn( _( b"entering debugger - " b"type c to continue starting hg or h for help\n" ) ) if ( debugger != b'pdb' and debugtrace[debugger] == debugtrace[b'pdb'] ): ui.warn( _( b"%s debugger specified " b"but its module was not found\n" ) % debugger ) with demandimport.deactivated(): debugtrace[debugger]() try: return _dispatch(req) finally: ui.flush() except: # re-raises # enter the debugger when we hit an exception if req.earlyoptions[b'debugger']: traceback.print_exc() debugmortem[debugger](sys.exc_info()[2]) raise return _callcatch(ui, _runcatchfunc) def _callcatch(ui, func): """like scmutil.callcatch but handles more high-level exceptions about config parsing and commands. besides, use handlecommandexception to handle uncaught exceptions. """ detailed_exit_code = -1 try: return scmutil.callcatch(ui, func) except error.AmbiguousCommand as inst: detailed_exit_code = 10 ui.warn( _(b"hg: command '%s' is ambiguous:\n %s\n") % (inst.prefix, b" ".join(inst.matches)) ) except error.CommandError as inst: detailed_exit_code = 10 if inst.command: ui.pager(b'help') msgbytes = pycompat.bytestr(inst.message) ui.warn(_(b"hg %s: %s\n") % (inst.command, msgbytes)) commands.help_(ui, inst.command, full=False, command=True) else: ui.warn(_(b"hg: %s\n") % inst.message) ui.warn(_(b"(use 'hg help -v' for a list of global options)\n")) except error.UnknownCommand as inst: detailed_exit_code = 10 nocmdmsg = _(b"hg: unknown command '%s'\n") % inst.command try: # check if the command is in a disabled extension # (but don't check for extensions themselves) formatted = help.formattedhelp( ui, commands, inst.command, unknowncmd=True ) ui.warn(nocmdmsg) ui.write(formatted) except (error.UnknownCommand, error.Abort): suggested = False if inst.all_commands: sim = error.getsimilar(inst.all_commands, inst.command) if sim: ui.warn(nocmdmsg) ui.warn(b"(%s)\n" % error.similarity_hint(sim)) suggested = True if not suggested: ui.warn(nocmdmsg) ui.warn(_(b"(use 'hg help' for a list of commands)\n")) except IOError: raise except KeyboardInterrupt: raise except: # probably re-raises if not handlecommandexception(ui): raise if ui.configbool(b'ui', b'detailed-exit-code'): return detailed_exit_code else: return -1 def aliasargs(fn, givenargs): args = [] # only care about alias 'args', ignore 'args' set by extensions.wrapfunction if not util.safehasattr(fn, '_origfunc'): args = getattr(fn, 'args', args) if args: cmd = b' '.join(map(procutil.shellquote, args)) nums = [] def replacer(m): num = int(m.group(1)) - 1 nums.append(num) if num < len(givenargs): return givenargs[num] raise error.InputError(_(b'too few arguments for command alias')) cmd = re.sub(br'\$(\d+|\$)', replacer, cmd) givenargs = [x for i, x in enumerate(givenargs) if i not in nums] args = pycompat.shlexsplit(cmd) return args + givenargs def aliasinterpolate(name, args, cmd): """interpolate args into cmd for shell aliases This also handles $0, $@ and "$@". """ # util.interpolate can't deal with "$@" (with quotes) because it's only # built to match prefix + patterns. replacemap = {b'$%d' % (i + 1): arg for i, arg in enumerate(args)} replacemap[b'$0'] = name replacemap[b'$$'] = b'$' replacemap[b'$@'] = b' '.join(args) # Typical Unix shells interpolate "$@" (with quotes) as all the positional # parameters, separated out into words. Emulate the same behavior here by # quoting the arguments individually. POSIX shells will then typically # tokenize each argument into exactly one word. replacemap[b'"$@"'] = b' '.join(procutil.shellquote(arg) for arg in args) # escape '\$' for regex regex = b'|'.join(replacemap.keys()).replace(b'$', br'\$') r = re.compile(regex) return r.sub(lambda x: replacemap[x.group()], cmd) class cmdalias: def __init__(self, ui, name, definition, cmdtable, source): self.name = self.cmd = name self.cmdname = b'' self.definition = definition self.fn = None self.givenargs = [] self.opts = [] self.help = b'' self.badalias = None self.unknowncmd = False self.source = source try: aliases, entry = cmdutil.findcmd(self.name, cmdtable) for alias, e in cmdtable.items(): if e is entry: self.cmd = alias break self.shadows = True except error.UnknownCommand: self.shadows = False if not self.definition: self.badalias = _(b"no definition for alias '%s'") % self.name return if self.definition.startswith(b'!'): shdef = self.definition[1:] self.shell = True def fn(ui, *args): env = {b'HG_ARGS': b' '.join((self.name,) + args)} def _checkvar(m): if m.groups()[0] == b'$': return m.group() elif int(m.groups()[0]) <= len(args): return m.group() else: ui.debug( b"No argument found for substitution " b"of %i variable in alias '%s' definition.\n" % (int(m.groups()[0]), self.name) ) return b'' cmd = re.sub(br'\$(\d+|\$)', _checkvar, shdef) cmd = aliasinterpolate(self.name, args, cmd) return ui.system( cmd, environ=env, blockedtag=b'alias_%s' % self.name ) self.fn = fn self.alias = True self._populatehelp(ui, name, shdef, self.fn) return try: args = pycompat.shlexsplit(self.definition) except ValueError as inst: self.badalias = _(b"error in definition for alias '%s': %s") % ( self.name, stringutil.forcebytestr(inst), ) return earlyopts, args = _earlysplitopts(args) if earlyopts: self.badalias = _( b"error in definition for alias '%s': %s may " b"only be given on the command line" ) % (self.name, b'/'.join(pycompat.ziplist(*earlyopts)[0])) return self.cmdname = cmd = args.pop(0) self.givenargs = args try: tableentry = cmdutil.findcmd(cmd, cmdtable, False)[1] if len(tableentry) > 2: self.fn, self.opts, cmdhelp = tableentry else: self.fn, self.opts = tableentry cmdhelp = None self.alias = True self._populatehelp(ui, name, cmd, self.fn, cmdhelp) except error.UnknownCommand: self.badalias = _( b"alias '%s' resolves to unknown command '%s'" ) % ( self.name, cmd, ) self.unknowncmd = True except error.AmbiguousCommand: self.badalias = _( b"alias '%s' resolves to ambiguous command '%s'" ) % ( self.name, cmd, ) def _populatehelp(self, ui, name, cmd, fn, defaulthelp=None): # confine strings to be passed to i18n.gettext() cfg = {} for k in (b'doc', b'help', b'category'): v = ui.config(b'alias', b'%s:%s' % (name, k), None) if v is None: continue if not encoding.isasciistr(v): self.badalias = _( b"non-ASCII character in alias definition '%s:%s'" ) % (name, k) return cfg[k] = v self.help = cfg.get(b'help', defaulthelp or b'') if self.help and self.help.startswith(b"hg " + cmd): # drop prefix in old-style help lines so hg shows the alias self.help = self.help[4 + len(cmd) :] self.owndoc = b'doc' in cfg doc = cfg.get(b'doc', pycompat.getdoc(fn)) if doc is not None: doc = pycompat.sysstr(doc) self.__doc__ = doc self.helpcategory = cfg.get( b'category', registrar.command.CATEGORY_NONE ) @property def args(self): args = pycompat.maplist(util.expandpath, self.givenargs) return aliasargs(self.fn, args) def __getattr__(self, name): adefaults = { 'norepo': True, 'intents': set(), 'optionalrepo': False, 'inferrepo': False, } if name not in adefaults: raise AttributeError(name) if self.badalias or util.safehasattr(self, 'shell'): return adefaults[name] return getattr(self.fn, name) def __call__(self, ui, *args, **opts): if self.badalias: hint = None if self.unknowncmd: try: # check if the command is in a disabled extension cmd, ext = extensions.disabledcmd(ui, self.cmdname)[:2] hint = _(b"'%s' is provided by '%s' extension") % (cmd, ext) except error.UnknownCommand: pass raise error.ConfigError(self.badalias, hint=hint) if self.shadows: ui.debug( b"alias '%s' shadows command '%s'\n" % (self.name, self.cmdname) ) ui.log( b'commandalias', b"alias '%s' expands to '%s'\n", self.name, self.definition, ) if util.safehasattr(self, 'shell'): return self.fn(ui, *args, **opts) else: try: return util.checksignature(self.fn)(ui, *args, **opts) except error.SignatureError: args = b' '.join([self.cmdname] + self.args) ui.debug(b"alias '%s' expands to '%s'\n" % (self.name, args)) raise class lazyaliasentry: """like a typical command entry (func, opts, help), but is lazy""" def __init__(self, ui, name, definition, cmdtable, source): self.ui = ui self.name = name self.definition = definition self.cmdtable = cmdtable.copy() self.source = source self.alias = True @util.propertycache def _aliasdef(self): return cmdalias( self.ui, self.name, self.definition, self.cmdtable, self.source ) def __getitem__(self, n): aliasdef = self._aliasdef if n == 0: return aliasdef elif n == 1: return aliasdef.opts elif n == 2: return aliasdef.help else: raise IndexError def __iter__(self): for i in range(3): yield self[i] def __len__(self): return 3 def addaliases(ui, cmdtable): # aliases are processed after extensions have been loaded, so they # may use extension commands. Aliases can also use other alias definitions, # but only if they have been defined prior to the current definition. for alias, definition in ui.configitems(b'alias', ignoresub=True): try: if cmdtable[alias].definition == definition: continue except (KeyError, AttributeError): # definition might not exist or it might not be a cmdalias pass source = ui.configsource(b'alias', alias) entry = lazyaliasentry(ui, alias, definition, cmdtable, source) cmdtable[alias] = entry def _parse(ui, args): options = {} cmdoptions = {} try: args = fancyopts.fancyopts(args, commands.globalopts, options) except getopt.GetoptError as inst: raise error.CommandError(None, stringutil.forcebytestr(inst)) if args: cmd, args = args[0], args[1:] aliases, entry = cmdutil.findcmd( cmd, commands.table, ui.configbool(b"ui", b"strict") ) cmd = aliases[0] args = aliasargs(entry[0], args) defaults = ui.config(b"defaults", cmd) if defaults: args = ( pycompat.maplist(util.expandpath, pycompat.shlexsplit(defaults)) + args ) c = list(entry[1]) else: cmd = None c = [] # combine global options into local for o in commands.globalopts: c.append((o[0], o[1], options[o[1]], o[3])) try: args = fancyopts.fancyopts(args, c, cmdoptions, gnu=True) except getopt.GetoptError as inst: raise error.CommandError(cmd, stringutil.forcebytestr(inst)) # separate global options back out for o in commands.globalopts: n = o[1] options[n] = cmdoptions[n] del cmdoptions[n] return (cmd, cmd and entry[0] or None, args, options, cmdoptions) def _parseconfig(ui, config): """parse the --config options from the command line""" configs = [] for cfg in config: try: name, value = [cfgelem.strip() for cfgelem in cfg.split(b'=', 1)] section, name = name.split(b'.', 1) if not section or not name: raise IndexError ui.setconfig(section, name, value, b'--config') configs.append((section, name, value)) except (IndexError, ValueError): raise error.InputError( _( b'malformed --config option: %r ' b'(use --config section.name=value)' ) % pycompat.bytestr(cfg) ) return configs def _earlyparseopts(ui, args): options = {} fancyopts.fancyopts( args, commands.globalopts, options, gnu=not ui.plain(b'strictflags'), early=True, optaliases={b'repository': [b'repo']}, ) return options def _earlysplitopts(args): """Split args into a list of possible early options and remainder args""" shortoptions = b'R:' # TODO: perhaps 'debugger' should be included longoptions = [b'cwd=', b'repository=', b'repo=', b'config='] return fancyopts.earlygetopt( args, shortoptions, longoptions, gnu=True, keepsep=True ) def runcommand(lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions): # run pre-hook, and abort if it fails hook.hook( lui, repo, b"pre-%s" % cmd, True, args=b" ".join(fullargs), pats=cmdpats, opts=cmdoptions, ) try: ret = _runcommand(ui, options, cmd, d) # run post-hook, passing command result hook.hook( lui, repo, b"post-%s" % cmd, False, args=b" ".join(fullargs), result=ret, pats=cmdpats, opts=cmdoptions, ) except Exception: # run failure hook and re-raise hook.hook( lui, repo, b"fail-%s" % cmd, False, args=b" ".join(fullargs), pats=cmdpats, opts=cmdoptions, ) raise return ret def _readsharedsourceconfig(ui, path): """if the current repository is shared one, this tries to read .hg/hgrc of shared source if we are in share-safe mode Config read is loaded into the ui object passed This should be called before reading .hg/hgrc or the main repo as that overrides config set in shared source""" try: with open(os.path.join(path, b".hg", b"requires"), "rb") as fp: requirements = set(fp.read().splitlines()) if not ( requirementsmod.SHARESAFE_REQUIREMENT in requirements and requirementsmod.SHARED_REQUIREMENT in requirements ): return hgvfs = vfs.vfs(os.path.join(path, b".hg")) sharedvfs = localrepo._getsharedvfs(hgvfs, requirements) root = sharedvfs.base ui.readconfig(sharedvfs.join(b"hgrc"), root) except IOError: pass def _getlocal(ui, rpath, wd=None): """Return (path, local ui object) for the given target path. Takes paths in [cwd]/.hg/hgrc into account." """ try: cwd = encoding.getcwd() except OSError as e: raise error.Abort( _(b"error getting current working directory: %s") % encoding.strtolocal(e.strerror) ) # If using an alternate wd, temporarily switch to it so that relative # paths are resolved correctly during config loading. oldcwd = None if wd is None: wd = cwd else: oldcwd = cwd os.chdir(wd) path = cmdutil.findrepo(wd) or b"" if not path: lui = ui else: lui = ui.copy() if rcutil.use_repo_hgrc(): _readsharedsourceconfig(lui, path) lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path) lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path) if rpath: path_obj = urlutil.get_clone_path_obj(lui, rpath) path = path_obj.rawloc lui = ui.copy() if rcutil.use_repo_hgrc(): _readsharedsourceconfig(lui, path) lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path) lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path) if oldcwd: os.chdir(oldcwd) return path, lui def _checkshellalias(lui, ui, args): """Return the function to run the shell alias, if it is required""" options = {} try: args = fancyopts.fancyopts(args, commands.globalopts, options) except getopt.GetoptError: return if not args: return cmdtable = commands.table cmd = args[0] try: strict = ui.configbool(b"ui", b"strict") aliases, entry = cmdutil.findcmd(cmd, cmdtable, strict) except (error.AmbiguousCommand, error.UnknownCommand): return cmd = aliases[0] fn = entry[0] if cmd and util.safehasattr(fn, 'shell'): # shell alias shouldn't receive early options which are consumed by hg _earlyopts, args = _earlysplitopts(args) d = lambda: fn(ui, *args[1:]) return lambda: runcommand( lui, None, cmd, args[:1], ui, options, d, [], {} ) def _dispatch(req): args = req.args ui = req.ui # check for cwd cwd = req.earlyoptions[b'cwd'] if cwd: os.chdir(cwd) rpath = req.earlyoptions[b'repository'] path, lui = _getlocal(ui, rpath) uis = {ui, lui} if req.repo: uis.add(req.repo.ui) if ( req.earlyoptions[b'verbose'] or req.earlyoptions[b'debug'] or req.earlyoptions[b'quiet'] ): for opt in (b'verbose', b'debug', b'quiet'): val = pycompat.bytestr(bool(req.earlyoptions[opt])) for ui_ in uis: ui_.setconfig(b'ui', opt, val, b'--' + opt) if req.earlyoptions[b'profile']: for ui_ in uis: ui_.setconfig(b'profiling', b'enabled', b'true', b'--profile') elif req.earlyoptions[b'profile'] is False: # Check for it being set already, so that we don't pollute the config # with this when using chg in the very common case that it's not # enabled. if lui.configbool(b'profiling', b'enabled'): # Only do this on lui so that `chg foo` with a user config setting # profiling.enabled=1 still shows profiling information (chg will # specify `--no-profile` when `hg serve` is starting up, we don't # want that to propagate to every later invocation). lui.setconfig(b'profiling', b'enabled', b'false', b'--no-profile') profile = lui.configbool(b'profiling', b'enabled') with profiling.profile(lui, enabled=profile) as profiler: # Configure extensions in phases: uisetup, extsetup, cmdtable, and # reposetup extensions.loadall(lui) # Propagate any changes to lui.__class__ by extensions ui.__class__ = lui.__class__ # (uisetup and extsetup are handled in extensions.loadall) # (reposetup is handled in hg.repository) addaliases(lui, commands.table) # All aliases and commands are completely defined, now. # Check abbreviation/ambiguity of shell alias. shellaliasfn = _checkshellalias(lui, ui, args) if shellaliasfn: # no additional configs will be set, set up the ui instances for ui_ in uis: extensions.populateui(ui_) return shellaliasfn() # check for fallback encoding fallback = lui.config(b'ui', b'fallbackencoding') if fallback: encoding.fallbackencoding = fallback fullargs = args cmd, func, args, options, cmdoptions = _parse(lui, args) # store the canonical command name in request object for later access req.canonical_command = cmd if options[b"config"] != req.earlyoptions[b"config"]: raise error.InputError(_(b"option --config may not be abbreviated")) if options[b"cwd"] != req.earlyoptions[b"cwd"]: raise error.InputError(_(b"option --cwd may not be abbreviated")) if options[b"repository"] != req.earlyoptions[b"repository"]: raise error.InputError( _( b"option -R has to be separated from other options (e.g. not " b"-qR) and --repository may only be abbreviated as --repo" ) ) if options[b"debugger"] != req.earlyoptions[b"debugger"]: raise error.InputError( _(b"option --debugger may not be abbreviated") ) # don't validate --profile/--traceback, which can be enabled from now if options[b"encoding"]: encoding.encoding = options[b"encoding"] if options[b"encodingmode"]: encoding.encodingmode = options[b"encodingmode"] if options[b"time"]: def get_times(): t = os.times() if t[4] == 0.0: # Windows leaves this as zero, so use time.perf_counter() t = (t[0], t[1], t[2], t[3], util.timer()) return t s = get_times() def print_time(): t = get_times() ui.warn( _(b"time: real %.3f secs (user %.3f+%.3f sys %.3f+%.3f)\n") % ( t[4] - s[4], t[0] - s[0], t[2] - s[2], t[1] - s[1], t[3] - s[3], ) ) ui.atexit(print_time) if options[b"profile"]: profiler.start() # if abbreviated version of this were used, take them in account, now if options[b'verbose'] or options[b'debug'] or options[b'quiet']: for opt in (b'verbose', b'debug', b'quiet'): if options[opt] == req.earlyoptions[opt]: continue val = pycompat.bytestr(bool(options[opt])) for ui_ in uis: ui_.setconfig(b'ui', opt, val, b'--' + opt) if options[b'traceback']: for ui_ in uis: ui_.setconfig(b'ui', b'traceback', b'on', b'--traceback') if options[b'noninteractive']: for ui_ in uis: ui_.setconfig(b'ui', b'interactive', b'off', b'-y') if cmdoptions.get(b'insecure', False): for ui_ in uis: ui_.insecureconnections = True # setup color handling before pager, because setting up pager # might cause incorrect console information coloropt = options[b'color'] for ui_ in uis: if coloropt: ui_.setconfig(b'ui', b'color', coloropt, b'--color') color.setup(ui_) if stringutil.parsebool(options[b'pager']): # ui.pager() expects 'internal-always-' prefix in this case ui.pager(b'internal-always-' + cmd) elif options[b'pager'] != b'auto': for ui_ in uis: ui_.disablepager() # configs are fully loaded, set up the ui instances for ui_ in uis: extensions.populateui(ui_) if options[b'version']: return commands.version_(ui) if options[b'help']: return commands.help_(ui, cmd, command=cmd is not None) elif not cmd: return commands.help_(ui, b'shortlist') repo = None cmdpats = args[:] assert func is not None # help out pytype if not func.norepo: # use the repo from the request only if we don't have -R if not rpath and not cwd: repo = req.repo if repo: # set the descriptors of the repo ui to those of ui repo.ui.fin = ui.fin repo.ui.fout = ui.fout repo.ui.ferr = ui.ferr repo.ui.fmsg = ui.fmsg else: try: repo = hg.repository( ui, path=path, presetupfuncs=req.prereposetups, intents=func.intents, ) if not repo.local(): raise error.InputError( _(b"repository '%s' is not local") % path ) repo.ui.setconfig( b"bundle", b"mainreporoot", repo.root, b'repo' ) except error.RequirementError: raise except error.RepoError: if rpath: # invalid -R path raise if not func.optionalrepo: if func.inferrepo and args and not path: # try to infer -R from command args repos = pycompat.maplist(cmdutil.findrepo, args) guess = repos[0] if guess and repos.count(guess) == len(repos): req.args = [b'--repository', guess] + fullargs req.earlyoptions[b'repository'] = guess return _dispatch(req) if not path: raise error.InputError( _( b"no repository found in" b" '%s' (.hg not found)" ) % encoding.getcwd() ) raise if repo: ui = repo.ui if options[b'hidden']: repo = repo.unfiltered() args.insert(0, repo) elif rpath: ui.warn(_(b"warning: --repository ignored\n")) msg = _formatargs(fullargs) ui.log(b"command", b'%s\n', msg) strcmdopt = pycompat.strkwargs(cmdoptions) d = lambda: util.checksignature(func)(ui, *args, **strcmdopt) try: return runcommand( lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions ) finally: if repo and repo != req.repo: repo.close() def _runcommand(ui, options, cmd, cmdfunc): """Run a command function, possibly with profiling enabled.""" try: with tracing.log("Running %s command" % cmd): return cmdfunc() except error.SignatureError: raise error.CommandError(cmd, _(b'invalid arguments')) def _exceptionwarning(ui): """Produce a warning message for the current active exception""" # For compatibility checking, we discard the portion of the hg # version after the + on the assumption that if a "normal # user" is running a build with a + in it the packager # probably built from fairly close to a tag and anyone with a # 'make local' copy of hg (where the version number can be out # of date) will be clueful enough to notice the implausible # version number and try updating. ct = util.versiontuple(n=2) worst = None, ct, b'', b'' if ui.config(b'ui', b'supportcontact') is None: for name, mod in extensions.extensions(): # 'testedwith' should be bytes, but not all extensions are ported # to py3 and we don't want UnicodeException because of that. testedwith = stringutil.forcebytestr( getattr(mod, 'testedwith', b'') ) version = extensions.moduleversion(mod) report = getattr(mod, 'buglink', _(b'the extension author.')) if not testedwith.strip(): # We found an untested extension. It's likely the culprit. worst = name, b'unknown', report, version break # Never blame on extensions bundled with Mercurial. if extensions.ismoduleinternal(mod): continue tested = [util.versiontuple(t, 2) for t in testedwith.split()] if ct in tested: continue lower = [t for t in tested if t < ct] nearest = max(lower or tested) if worst[0] is None or nearest < worst[1]: worst = name, nearest, report, version if worst[0] is not None: name, testedwith, report, version = worst if not isinstance(testedwith, (bytes, str)): testedwith = b'.'.join( [stringutil.forcebytestr(c) for c in testedwith] ) extver = version or _(b"(version N/A)") warning = _( b'** Unknown exception encountered with ' b'possibly-broken third-party extension "%s" %s\n' b'** which supports versions %s of Mercurial.\n' b'** Please disable "%s" and try your action again.\n' b'** If that fixes the bug please report it to %s\n' ) % (name, extver, testedwith, name, stringutil.forcebytestr(report)) else: bugtracker = ui.config(b'ui', b'supportcontact') if bugtracker is None: bugtracker = _(b"https://mercurial-scm.org/wiki/BugTracker") warning = ( _( b"** unknown exception encountered, " b"please report by visiting\n** " ) + bugtracker + b'\n' ) sysversion = pycompat.sysbytes(sys.version).replace(b'\n', b'') def ext_with_ver(x): ext = x[0] ver = extensions.moduleversion(x[1]) if ver: ext += b' ' + ver return ext warning += ( (_(b"** Python %s\n") % sysversion) + (_(b"** Mercurial Distributed SCM (version %s)\n") % util.version()) + ( _(b"** Extensions loaded: %s\n") % b", ".join( [ext_with_ver(x) for x in sorted(extensions.extensions())] ) ) ) return warning def handlecommandexception(ui): """Produce a warning message for broken commands Called when handling an exception; the exception is reraised if this function returns False, ignored otherwise. """ warning = _exceptionwarning(ui) ui.log( b"commandexception", b"%s\n%s\n", warning, pycompat.sysbytes(traceback.format_exc()), ) ui.warn(warning) return False # re-raise the exception