view doc/gendoc.py @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

#!/usr/bin/env python
"""usage: %s DOC ...

where DOC is the name of a document
"""

from __future__ import absolute_import

import os
import sys
import textwrap

# This script is executed during installs and may not have C extensions
# available. Relax C module requirements.
os.environ['HGMODULEPOLICY'] = 'allow'
# import from the live mercurial repo
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
# Load util so that the locale path is set by i18n.setdatapath() before
# calling _().
from mercurial import util
util.datapath
from mercurial import (
    commands,
    extensions,
    help,
    minirst,
    ui as uimod,
)
from mercurial.i18n import (
    gettext,
    _,
)

table = commands.table
globalopts = commands.globalopts
helptable = help.helptable
loaddoc = help.loaddoc

def get_desc(docstr):
    if not docstr:
        return "", ""
    # sanitize
    docstr = docstr.strip("\n")
    docstr = docstr.rstrip()
    shortdesc = docstr.splitlines()[0].strip()

    i = docstr.find("\n")
    if i != -1:
        desc = docstr[i + 2:]
    else:
        desc = shortdesc

    desc = textwrap.dedent(desc)

    return (shortdesc, desc)

def get_opts(opts):
    for opt in opts:
        if len(opt) == 5:
            shortopt, longopt, default, desc, optlabel = opt
        else:
            shortopt, longopt, default, desc = opt
            optlabel = _("VALUE")
        allopts = []
        if shortopt:
            allopts.append("-%s" % shortopt)
        if longopt:
            allopts.append("--%s" % longopt)
        if isinstance(default, list):
            allopts[-1] += " <%s[+]>" % optlabel
        elif (default is not None) and not isinstance(default, bool):
            allopts[-1] += " <%s>" % optlabel
        if '\n' in desc:
            # only remove line breaks and indentation
            desc = ' '.join(l.lstrip() for l in desc.split('\n'))
        desc += default and _(" (default: %s)") % default or ""
        yield (", ".join(allopts), desc)

def get_cmd(cmd, cmdtable):
    d = {}
    attr = cmdtable[cmd]
    cmds = cmd.lstrip("^").split("|")

    d['cmd'] = cmds[0]
    d['aliases'] = cmd.split("|")[1:]
    d['desc'] = get_desc(gettext(attr[0].__doc__))
    d['opts'] = list(get_opts(attr[1]))

    s = 'hg ' + cmds[0]
    if len(attr) > 2:
        if not attr[2].startswith('hg'):
            s += ' ' + attr[2]
        else:
            s = attr[2]
    d['synopsis'] = s.strip()

    return d

def showdoc(ui):
    # print options
    ui.write(minirst.section(_("Options")))
    multioccur = False
    for optstr, desc in get_opts(globalopts):
        ui.write("%s\n    %s\n\n" % (optstr, desc))
        if optstr.endswith("[+]>"):
            multioccur = True
    if multioccur:
        ui.write(_("\n[+] marked option can be specified multiple times\n"))
        ui.write("\n")

    # print cmds
    ui.write(minirst.section(_("Commands")))
    commandprinter(ui, table, minirst.subsection)

    # print help topics
    # The config help topic is included in the hgrc.5 man page.
    helpprinter(ui, helptable, minirst.section, exclude=['config'])

    ui.write(minirst.section(_("Extensions")))
    ui.write(_("This section contains help for extensions that are "
               "distributed together with Mercurial. Help for other "
               "extensions is available in the help system."))
    ui.write(("\n\n"
             ".. contents::\n"
             "   :class: htmlonly\n"
             "   :local:\n"
             "   :depth: 1\n\n"))

    for extensionname in sorted(allextensionnames()):
        mod = extensions.load(ui, extensionname, None)
        ui.write(minirst.subsection(extensionname))
        ui.write("%s\n\n" % gettext(mod.__doc__))
        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            ui.write(minirst.subsubsection(_('Commands')))
            commandprinter(ui, cmdtable, minirst.subsubsubsection)

def showtopic(ui, topic):
    extrahelptable = [
        (["common"], '', loaddoc('common')),
        (["hg.1"], '', loaddoc('hg.1')),
        (["hg-ssh.8"], '', loaddoc('hg-ssh.8')),
        (["hgignore.5"], '', loaddoc('hgignore.5')),
        (["hgrc.5"], '', loaddoc('hgrc.5')),
        (["hgignore.5.gendoc"], '', loaddoc('hgignore')),
        (["hgrc.5.gendoc"], '', loaddoc('config')),
    ]
    helpprinter(ui, helptable + extrahelptable, None, include=[topic])

def helpprinter(ui, helptable, sectionfunc, include=[], exclude=[]):
    for names, sec, doc in helptable:
        if exclude and names[0] in exclude:
            continue
        if include and names[0] not in include:
            continue
        for name in names:
            ui.write(".. _%s:\n" % name)
        ui.write("\n")
        if sectionfunc:
            ui.write(sectionfunc(sec))
        if callable(doc):
            doc = doc(ui)
        ui.write(doc)
        ui.write("\n")

def commandprinter(ui, cmdtable, sectionfunc):
    h = {}
    for c, attr in cmdtable.items():
        f = c.split("|")[0]
        f = f.lstrip("^")
        h[f] = c
    cmds = h.keys()
    cmds.sort()

    for f in cmds:
        if f.startswith("debug"):
            continue
        d = get_cmd(h[f], cmdtable)
        ui.write(sectionfunc(d['cmd']))
        # short description
        ui.write(d['desc'][0])
        # synopsis
        ui.write("::\n\n")
        synopsislines = d['synopsis'].splitlines()
        for line in synopsislines:
            # some commands (such as rebase) have a multi-line
            # synopsis
            ui.write("   %s\n" % line)
        ui.write('\n')
        # description
        ui.write("%s\n\n" % d['desc'][1])
        # options
        opt_output = list(d['opts'])
        if opt_output:
            opts_len = max([len(line[0]) for line in opt_output])
            ui.write(_("Options:\n\n"))
            multioccur = False
            for optstr, desc in opt_output:
                if desc:
                    s = "%-*s  %s" % (opts_len, optstr, desc)
                else:
                    s = optstr
                ui.write("%s\n" % s)
                if optstr.endswith("[+]>"):
                    multioccur = True
            if multioccur:
                ui.write(_("\n[+] marked option can be specified"
                           " multiple times\n"))
            ui.write("\n")
        # aliases
        if d['aliases']:
            ui.write(_("    aliases: %s\n\n") % " ".join(d['aliases']))


def allextensionnames():
    return extensions.enabled().keys() + extensions.disabled().keys()

if __name__ == "__main__":
    doc = 'hg.1.gendoc'
    if len(sys.argv) > 1:
        doc = sys.argv[1]

    ui = uimod.ui.load()
    if doc == 'hg.1.gendoc':
        showdoc(ui)
    else:
        showtopic(ui, sys.argv[1])