hgext/churn.py

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# churn.py - create a graph of revisions count grouped by template
#
# Copyright 2006 Josef "Jeff" Sipek <[e-mail]>
# Copyright 2008 Alexander Solovyov <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''command to display statistics about repository history'''

from __future__ import absolute_import

import datetime
import os
import time

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    encoding,
    patch,
    registrar,
    scmutil,
    util,
)

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

def maketemplater(ui, repo, tmpl):
    return cmdutil.changeset_templater(ui, repo, False, None, tmpl, None, False)

def changedlines(ui, repo, ctx1, ctx2, fns):
    added, removed = 0, 0
    fmatch = scmutil.matchfiles(repo, fns)
    diff = ''.join(patch.diff(repo, ctx1.node(), ctx2.node(), fmatch))
    for l in diff.split('\n'):
        if l.startswith("+") and not l.startswith("+++ "):
            added += 1
        elif l.startswith("-") and not l.startswith("--- "):
            removed += 1
    return (added, removed)

def countrate(ui, repo, amap, *pats, **opts):
    """Calculate stats"""
    if opts.get('dateformat'):
        def getkey(ctx):
            t, tz = ctx.date()
            date = datetime.datetime(*time.gmtime(float(t) - tz)[:6])
            return date.strftime(opts['dateformat'])
    else:
        tmpl = opts.get('oldtemplate') or opts.get('template')
        tmpl = maketemplater(ui, repo, tmpl)
        def getkey(ctx):
            ui.pushbuffer()
            tmpl.show(ctx)
            return ui.popbuffer()

    state = {'count': 0}
    rate = {}
    df = False
    if opts.get('date'):
        df = util.matchdate(opts['date'])

    m = scmutil.match(repo[None], pats, opts)
    def prep(ctx, fns):
        rev = ctx.rev()
        if df and not df(ctx.date()[0]): # doesn't match date format
            return

        key = getkey(ctx).strip()
        key = amap.get(key, key) # alias remap
        if opts.get('changesets'):
            rate[key] = (rate.get(key, (0,))[0] + 1, 0)
        else:
            parents = ctx.parents()
            if len(parents) > 1:
                ui.note(_('revision %d is a merge, ignoring...\n') % (rev,))
                return

            ctx1 = parents[0]
            lines = changedlines(ui, repo, ctx1, ctx, fns)
            rate[key] = [r + l for r, l in zip(rate.get(key, (0, 0)), lines)]

        state['count'] += 1
        ui.progress(_('analyzing'), state['count'], total=len(repo),
                    unit=_('revisions'))

    for ctx in cmdutil.walkchangerevs(repo, m, opts, prep):
        continue

    ui.progress(_('analyzing'), None)

    return rate


@command('churn',
    [('r', 'rev', [],
     _('count rate for the specified revision or revset'), _('REV')),
    ('d', 'date', '',
     _('count rate for revisions matching date spec'), _('DATE')),
    ('t', 'oldtemplate', '',
     _('template to group changesets (DEPRECATED)'), _('TEMPLATE')),
    ('T', 'template', '{author|email}',
     _('template to group changesets'), _('TEMPLATE')),
    ('f', 'dateformat', '',
     _('strftime-compatible format for grouping by date'), _('FORMAT')),
    ('c', 'changesets', False, _('count rate by number of changesets')),
    ('s', 'sort', False, _('sort by key (default: sort by count)')),
    ('', 'diffstat', False, _('display added/removed lines separately')),
    ('', 'aliases', '', _('file with email aliases'), _('FILE')),
    ] + cmdutil.walkopts,
    _("hg churn [-d DATE] [-r REV] [--aliases FILE] [FILE]"),
    inferrepo=True)
def churn(ui, repo, *pats, **opts):
    '''histogram of changes to the repository

    This command will display a histogram representing the number
    of changed lines or revisions, grouped according to the given
    template. The default template will group changes by author.
    The --dateformat option may be used to group the results by
    date instead.

    Statistics are based on the number of changed lines, or
    alternatively the number of matching revisions if the
    --changesets option is specified.

    Examples::

      # display count of changed lines for every committer
      hg churn -T "{author|email}"

      # display daily activity graph
      hg churn -f "%H" -s -c

      # display activity of developers by month
      hg churn -f "%Y-%m" -s -c

      # display count of lines changed in every year
      hg churn -f "%Y" -s

    It is possible to map alternate email addresses to a main address
    by providing a file using the following format::

      <alias email> = <actual email>

    Such a file may be specified with the --aliases option, otherwise
    a .hgchurn file will be looked for in the working directory root.
    Aliases will be split from the rightmost "=".
    '''
    def pad(s, l):
        return s + " " * (l - encoding.colwidth(s))

    amap = {}
    aliases = opts.get('aliases')
    if not aliases and os.path.exists(repo.wjoin('.hgchurn')):
        aliases = repo.wjoin('.hgchurn')
    if aliases:
        for l in open(aliases, "r"):
            try:
                alias, actual = l.rsplit('=' in l and '=' or None, 1)
                amap[alias.strip()] = actual.strip()
            except ValueError:
                l = l.strip()
                if l:
                    ui.warn(_("skipping malformed alias: %s\n") % l)
                continue

    rate = countrate(ui, repo, amap, *pats, **opts).items()
    if not rate:
        return

    if opts.get('sort'):
        rate.sort()
    else:
        rate.sort(key=lambda x: (-sum(x[1]), x))

    # Be careful not to have a zero maxcount (issue833)
    maxcount = float(max(sum(v) for k, v in rate)) or 1.0
    maxname = max(len(k) for k, v in rate)

    ttywidth = ui.termwidth()
    ui.debug("assuming %i character terminal\n" % ttywidth)
    width = ttywidth - maxname - 2 - 2 - 2

    if opts.get('diffstat'):
        width -= 15
        def format(name, diffstat):
            added, removed = diffstat
            return "%s %15s %s%s\n" % (pad(name, maxname),
                                       '+%d/-%d' % (added, removed),
                                       ui.label('+' * charnum(added),
                                                'diffstat.inserted'),
                                       ui.label('-' * charnum(removed),
                                                'diffstat.deleted'))
    else:
        width -= 6
        def format(name, count):
            return "%s %6d %s\n" % (pad(name, maxname), sum(count),
                                    '*' * charnum(sum(count)))

    def charnum(count):
        return int(round(count * width / maxcount))

    for name, count in rate:
        ui.write(format(name, count))