revlog: skeleton support for version 2 revlogs
There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.
It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.
This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.
An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.
To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.
Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.
There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.
# Minimal support for git commands on an hg repository
#
# Copyright 2005, 2006 Chris Mason <mason@suse.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''browse the repository in a graphical way
The hgk extension allows browsing the history of a repository in a
graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not
distributed with Mercurial.)
hgk consists of two parts: a Tcl script that does the displaying and
querying of information, and an extension to Mercurial named hgk.py,
which provides hooks for hgk to get information. hgk can be found in
the contrib directory, and the extension is shipped in the hgext
repository, and needs to be enabled.
The :hg:`view` command will launch the hgk Tcl script. For this command
to work, hgk must be in your search path. Alternately, you can specify
the path to hgk in your configuration file::
[hgk]
path = /location/of/hgk
hgk can make use of the extdiff extension to visualize revisions.
Assuming you had already configured extdiff vdiff command, just add::
[hgk]
vdiff=vdiff
Revisions context menu will now display additional entries to fire
vdiff on hovered and selected revisions.
'''
from __future__ import absolute_import
import os
from mercurial.i18n import _
from mercurial.node import (
nullid,
nullrev,
short,
)
from mercurial import (
commands,
obsolete,
patch,
registrar,
scmutil,
)
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
@command('debug-diff-tree',
[('p', 'patch', None, _('generate patch')),
('r', 'recursive', None, _('recursive')),
('P', 'pretty', None, _('pretty')),
('s', 'stdin', None, _('stdin')),
('C', 'copy', None, _('detect copies')),
('S', 'search', "", _('search'))],
('[OPTION]... NODE1 NODE2 [FILE]...'),
inferrepo=True)
def difftree(ui, repo, node1=None, node2=None, *files, **opts):
"""diff trees from two commits"""
def __difftree(repo, node1, node2, files=None):
assert node2 is not None
if files is None:
files = []
mmap = repo[node1].manifest()
mmap2 = repo[node2].manifest()
m = scmutil.match(repo[node1], files)
modified, added, removed = repo.status(node1, node2, m)[:3]
empty = short(nullid)
for f in modified:
# TODO get file permissions
ui.write((":100664 100664 %s %s M\t%s\t%s\n") %
(short(mmap[f]), short(mmap2[f]), f, f))
for f in added:
ui.write((":000000 100664 %s %s N\t%s\t%s\n") %
(empty, short(mmap2[f]), f, f))
for f in removed:
ui.write((":100664 000000 %s %s D\t%s\t%s\n") %
(short(mmap[f]), empty, f, f))
##
while True:
if opts['stdin']:
try:
line = raw_input().split(' ')
node1 = line[0]
if len(line) > 1:
node2 = line[1]
else:
node2 = None
except EOFError:
break
node1 = repo.lookup(node1)
if node2:
node2 = repo.lookup(node2)
else:
node2 = node1
node1 = repo.changelog.parents(node1)[0]
if opts['patch']:
if opts['pretty']:
catcommit(ui, repo, node2, "")
m = scmutil.match(repo[node1], files)
diffopts = patch.difffeatureopts(ui)
diffopts.git = True
chunks = patch.diff(repo, node1, node2, match=m,
opts=diffopts)
for chunk in chunks:
ui.write(chunk)
else:
__difftree(repo, node1, node2, files=files)
if not opts['stdin']:
break
def catcommit(ui, repo, n, prefix, ctx=None):
nlprefix = '\n' + prefix
if ctx is None:
ctx = repo[n]
# use ctx.node() instead ??
ui.write(("tree %s\n" % short(ctx.changeset()[0])))
for p in ctx.parents():
ui.write(("parent %s\n" % p))
date = ctx.date()
description = ctx.description().replace("\0", "")
ui.write(("author %s %s %s\n" % (ctx.user(), int(date[0]), date[1])))
if 'committer' in ctx.extra():
ui.write(("committer %s\n" % ctx.extra()['committer']))
ui.write(("revision %d\n" % ctx.rev()))
ui.write(("branch %s\n" % ctx.branch()))
if obsolete.isenabled(repo, obsolete.createmarkersopt):
if ctx.obsolete():
ui.write(("obsolete\n"))
ui.write(("phase %s\n\n" % ctx.phasestr()))
if prefix != "":
ui.write("%s%s\n" % (prefix,
description.replace('\n', nlprefix).strip()))
else:
ui.write(description + "\n")
if prefix:
ui.write('\0')
@command('debug-merge-base', [], _('REV REV'))
def base(ui, repo, node1, node2):
"""output common ancestor information"""
node1 = repo.lookup(node1)
node2 = repo.lookup(node2)
n = repo.changelog.ancestor(node1, node2)
ui.write(short(n) + "\n")
@command('debug-cat-file',
[('s', 'stdin', None, _('stdin'))],
_('[OPTION]... TYPE FILE'),
inferrepo=True)
def catfile(ui, repo, type=None, r=None, **opts):
"""cat a specific revision"""
# in stdin mode, every line except the commit is prefixed with two
# spaces. This way the our caller can find the commit without magic
# strings
#
prefix = ""
if opts['stdin']:
try:
(type, r) = raw_input().split(' ')
prefix = " "
except EOFError:
return
else:
if not type or not r:
ui.warn(_("cat-file: type or revision not supplied\n"))
commands.help_(ui, 'cat-file')
while r:
if type != "commit":
ui.warn(_("aborting hg cat-file only understands commits\n"))
return 1
n = repo.lookup(r)
catcommit(ui, repo, n, prefix)
if opts['stdin']:
try:
(type, r) = raw_input().split(' ')
except EOFError:
break
else:
break
# git rev-tree is a confusing thing. You can supply a number of
# commit sha1s on the command line, and it walks the commit history
# telling you which commits are reachable from the supplied ones via
# a bitmask based on arg position.
# you can specify a commit to stop at by starting the sha1 with ^
def revtree(ui, args, repo, full="tree", maxnr=0, parents=False):
def chlogwalk():
count = len(repo)
i = count
l = [0] * 100
chunk = 100
while True:
if chunk > i:
chunk = i
i = 0
else:
i -= chunk
for x in xrange(chunk):
if i + x >= count:
l[chunk - x:] = [0] * (chunk - x)
break
if full is not None:
if (i + x) in repo:
l[x] = repo[i + x]
l[x].changeset() # force reading
else:
if (i + x) in repo:
l[x] = 1
for x in xrange(chunk - 1, -1, -1):
if l[x] != 0:
yield (i + x, full is not None and l[x] or None)
if i == 0:
break
# calculate and return the reachability bitmask for sha
def is_reachable(ar, reachable, sha):
if len(ar) == 0:
return 1
mask = 0
for i in xrange(len(ar)):
if sha in reachable[i]:
mask |= 1 << i
return mask
reachable = []
stop_sha1 = []
want_sha1 = []
count = 0
# figure out which commits they are asking for and which ones they
# want us to stop on
for i, arg in enumerate(args):
if arg.startswith('^'):
s = repo.lookup(arg[1:])
stop_sha1.append(s)
want_sha1.append(s)
elif arg != 'HEAD':
want_sha1.append(repo.lookup(arg))
# calculate the graph for the supplied commits
for i, n in enumerate(want_sha1):
reachable.append(set())
visit = [n]
reachable[i].add(n)
while visit:
n = visit.pop(0)
if n in stop_sha1:
continue
for p in repo.changelog.parents(n):
if p not in reachable[i]:
reachable[i].add(p)
visit.append(p)
if p in stop_sha1:
continue
# walk the repository looking for commits that are in our
# reachability graph
for i, ctx in chlogwalk():
if i not in repo:
continue
n = repo.changelog.node(i)
mask = is_reachable(want_sha1, reachable, n)
if mask:
parentstr = ""
if parents:
pp = repo.changelog.parents(n)
if pp[0] != nullid:
parentstr += " " + short(pp[0])
if pp[1] != nullid:
parentstr += " " + short(pp[1])
if not full:
ui.write("%s%s\n" % (short(n), parentstr))
elif full == "commit":
ui.write("%s%s\n" % (short(n), parentstr))
catcommit(ui, repo, n, ' ', ctx)
else:
(p1, p2) = repo.changelog.parents(n)
(h, h1, h2) = map(short, (n, p1, p2))
(i1, i2) = map(repo.changelog.rev, (p1, p2))
date = ctx.date()[0]
ui.write("%s %s:%s" % (date, h, mask))
mask = is_reachable(want_sha1, reachable, p1)
if i1 != nullrev and mask > 0:
ui.write("%s:%s " % (h1, mask)),
mask = is_reachable(want_sha1, reachable, p2)
if i2 != nullrev and mask > 0:
ui.write("%s:%s " % (h2, mask))
ui.write("\n")
if maxnr and count >= maxnr:
break
count += 1
# git rev-list tries to order things by date, and has the ability to stop
# at a given commit without walking the whole repo. TODO add the stop
# parameter
@command('debug-rev-list',
[('H', 'header', None, _('header')),
('t', 'topo-order', None, _('topo-order')),
('p', 'parents', None, _('parents')),
('n', 'max-count', 0, _('max-count'))],
('[OPTION]... REV...'))
def revlist(ui, repo, *revs, **opts):
"""print revisions"""
if opts['header']:
full = "commit"
else:
full = None
copy = [x for x in revs]
revtree(ui, copy, repo, full, opts['max_count'], opts['parents'])
@command('view',
[('l', 'limit', '',
_('limit number of changes displayed'), _('NUM'))],
_('[-l LIMIT] [REVRANGE]'))
def view(ui, repo, *etc, **opts):
"start interactive history viewer"
os.chdir(repo.root)
optstr = ' '.join(['--%s %s' % (k, v) for k, v in opts.iteritems() if v])
if repo.filtername is None:
optstr += '--hidden'
cmd = ui.config("hgk", "path", "hgk") + " %s %s" % (optstr, " ".join(etc))
ui.debug("running %s\n" % cmd)
ui.system(cmd, blockedtag='hgk_view')