view mercurial/treediscovery.py @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# discovery.py - protocol changeset discovery functions
#
# Copyright 2010 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import collections

from .i18n import _
from .node import (
    nullid,
    short,
)
from . import (
    error,
)

def findcommonincoming(repo, remote, heads=None, force=False):
    """Return a tuple (common, fetch, heads) used to identify the common
    subset of nodes between repo and remote.

    "common" is a list of (at least) the heads of the common subset.
    "fetch" is a list of roots of the nodes that would be incoming, to be
      supplied to changegroupsubset.
    "heads" is either the supplied heads, or else the remote's heads.
    """

    knownnode = repo.changelog.hasnode
    search = []
    fetch = set()
    seen = set()
    seenbranch = set()
    base = set()

    if not heads:
        heads = remote.heads()

    if repo.changelog.tip() == nullid:
        base.add(nullid)
        if heads != [nullid]:
            return [nullid], [nullid], list(heads)
        return [nullid], [], heads

    # assume we're closer to the tip than the root
    # and start by examining the heads
    repo.ui.status(_("searching for changes\n"))

    unknown = []
    for h in heads:
        if not knownnode(h):
            unknown.append(h)
        else:
            base.add(h)

    if not unknown:
        return list(base), [], list(heads)

    req = set(unknown)
    reqcnt = 0

    # search through remote branches
    # a 'branch' here is a linear segment of history, with four parts:
    # head, root, first parent, second parent
    # (a branch always has two parents (or none) by definition)
    unknown = collections.deque(remote.branches(unknown))
    while unknown:
        r = []
        while unknown:
            n = unknown.popleft()
            if n[0] in seen:
                continue

            repo.ui.debug("examining %s:%s\n"
                          % (short(n[0]), short(n[1])))
            if n[0] == nullid: # found the end of the branch
                pass
            elif n in seenbranch:
                repo.ui.debug("branch already found\n")
                continue
            elif n[1] and knownnode(n[1]): # do we know the base?
                repo.ui.debug("found incomplete branch %s:%s\n"
                              % (short(n[0]), short(n[1])))
                search.append(n[0:2]) # schedule branch range for scanning
                seenbranch.add(n)
            else:
                if n[1] not in seen and n[1] not in fetch:
                    if knownnode(n[2]) and knownnode(n[3]):
                        repo.ui.debug("found new changeset %s\n" %
                                      short(n[1]))
                        fetch.add(n[1]) # earliest unknown
                    for p in n[2:4]:
                        if knownnode(p):
                            base.add(p) # latest known

                for p in n[2:4]:
                    if p not in req and not knownnode(p):
                        r.append(p)
                        req.add(p)
            seen.add(n[0])

        if r:
            reqcnt += 1
            repo.ui.progress(_('searching'), reqcnt, unit=_('queries'))
            repo.ui.debug("request %d: %s\n" %
                        (reqcnt, " ".join(map(short, r))))
            for p in xrange(0, len(r), 10):
                for b in remote.branches(r[p:p + 10]):
                    repo.ui.debug("received %s:%s\n" %
                                  (short(b[0]), short(b[1])))
                    unknown.append(b)

    # do binary search on the branches we found
    while search:
        newsearch = []
        reqcnt += 1
        repo.ui.progress(_('searching'), reqcnt, unit=_('queries'))
        for n, l in zip(search, remote.between(search)):
            l.append(n[1])
            p = n[0]
            f = 1
            for i in l:
                repo.ui.debug("narrowing %d:%d %s\n" % (f, len(l), short(i)))
                if knownnode(i):
                    if f <= 2:
                        repo.ui.debug("found new branch changeset %s\n" %
                                          short(p))
                        fetch.add(p)
                        base.add(i)
                    else:
                        repo.ui.debug("narrowed branch search to %s:%s\n"
                                      % (short(p), short(i)))
                        newsearch.append((p, i))
                    break
                p, f = i, f * 2
            search = newsearch

    # sanity check our fetch list
    for f in fetch:
        if knownnode(f):
            raise error.RepoError(_("already have changeset ")
                                  + short(f[:4]))

    base = list(base)
    if base == [nullid]:
        if force:
            repo.ui.warn(_("warning: repository is unrelated\n"))
        else:
            raise error.Abort(_("repository is unrelated"))

    repo.ui.debug("found new changesets starting at " +
                 " ".join([short(f) for f in fetch]) + "\n")

    repo.ui.progress(_('searching'), None)
    repo.ui.debug("%d total queries\n" % reqcnt)

    return base, list(fetch), heads