view tests/f @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

#!/usr/bin/env python

"""
Utility for inspecting files in various ways.

This tool is like the collection of tools found in a unix environment but are
cross platform and stable and suitable for our needs in the test suite.

This can be used instead of tools like:
  [
  dd
  find
  head
  hexdump
  ls
  md5sum
  readlink
  sha1sum
  stat
  tail
  test
  readlink.py
  md5sum.py
"""

from __future__ import absolute_import

import glob
import hashlib
import optparse
import os
import re
import sys

def visit(opts, filenames, outfile):
    """Process filenames in the way specified in opts, writing output to
    outfile."""
    for f in sorted(filenames):
        isstdin = f == '-'
        if not isstdin and not os.path.lexists(f):
            outfile.write('%s: file not found\n' % f)
            continue
        quiet = opts.quiet and not opts.recurse or isstdin
        isdir = os.path.isdir(f)
        islink = os.path.islink(f)
        isfile = os.path.isfile(f) and not islink
        dirfiles = None
        content = None
        facts = []
        if isfile:
            if opts.type:
                facts.append('file')
            if opts.hexdump or opts.dump or opts.md5:
                content = file(f, 'rb').read()
        elif islink:
            if opts.type:
                facts.append('link')
            content = os.readlink(f)
        elif isstdin:
            content = sys.stdin.read()
            if opts.size:
                facts.append('size=%s' % len(content))
        elif isdir:
            if opts.recurse or opts.type:
                dirfiles = glob.glob(f + '/*')
                facts.append('directory with %s files' % len(dirfiles))
        elif opts.type:
            facts.append('type unknown')
        if not isstdin:
            stat = os.lstat(f)
            if opts.size and not isdir:
                facts.append('size=%s' % stat.st_size)
            if opts.mode and not islink:
                facts.append('mode=%o' % (stat.st_mode & 0o777))
            if opts.links:
                facts.append('links=%s' % stat.st_nlink)
            if opts.newer:
                # mtime might be in whole seconds so newer file might be same
                if stat.st_mtime >= os.stat(opts.newer).st_mtime:
                    facts.append('newer than %s' % opts.newer)
                else:
                    facts.append('older than %s' % opts.newer)
        if opts.md5 and content is not None:
            h = hashlib.md5(content)
            facts.append('md5=%s' % h.hexdigest()[:opts.bytes])
        if opts.sha1 and content is not None:
            h = hashlib.sha1(content)
            facts.append('sha1=%s' % h.hexdigest()[:opts.bytes])
        if isstdin:
            outfile.write(', '.join(facts) + '\n')
        elif facts:
            outfile.write('%s: %s\n' % (f, ', '.join(facts)))
        elif not quiet:
            outfile.write('%s:\n' % f)
        if content is not None:
            chunk = content
            if not islink:
                if opts.lines:
                    if opts.lines >= 0:
                        chunk = ''.join(chunk.splitlines(True)[:opts.lines])
                    else:
                        chunk = ''.join(chunk.splitlines(True)[opts.lines:])
                if opts.bytes:
                    if opts.bytes >= 0:
                        chunk = chunk[:opts.bytes]
                    else:
                        chunk = chunk[opts.bytes:]
            if opts.hexdump:
                for i in range(0, len(chunk), 16):
                    s = chunk[i:i + 16]
                    outfile.write('%04x: %-47s |%s|\n' %
                                  (i, ' '.join('%02x' % ord(c) for c in s),
                                   re.sub('[^ -~]', '.', s)))
            if opts.dump:
                if not quiet:
                    outfile.write('>>>\n')
                outfile.write(chunk)
                if not quiet:
                    if chunk.endswith('\n'):
                        outfile.write('<<<\n')
                    else:
                        outfile.write('\n<<< no trailing newline\n')
        if opts.recurse and dirfiles:
            assert not isstdin
            visit(opts, dirfiles, outfile)

if __name__ == "__main__":
    parser = optparse.OptionParser("%prog [options] [filenames]")
    parser.add_option("-t", "--type", action="store_true",
                      help="show file type (file or directory)")
    parser.add_option("-m", "--mode", action="store_true",
                      help="show file mode")
    parser.add_option("-l", "--links", action="store_true",
                      help="show number of links")
    parser.add_option("-s", "--size", action="store_true",
                      help="show size of file")
    parser.add_option("-n", "--newer", action="store",
                      help="check if file is newer (or same)")
    parser.add_option("-r", "--recurse", action="store_true",
                      help="recurse into directories")
    parser.add_option("-S", "--sha1", action="store_true",
                      help="show sha1 hash of the content")
    parser.add_option("-M", "--md5", action="store_true",
                      help="show md5 hash of the content")
    parser.add_option("-D", "--dump", action="store_true",
                      help="dump file content")
    parser.add_option("-H", "--hexdump", action="store_true",
                      help="hexdump file content")
    parser.add_option("-B", "--bytes", type="int",
                      help="number of characters to dump")
    parser.add_option("-L", "--lines", type="int",
                      help="number of lines to dump")
    parser.add_option("-q", "--quiet", action="store_true",
                      help="no default output")
    (opts, filenames) = parser.parse_args(sys.argv[1:])
    if not filenames:
        filenames = ['-']

    visit(opts, filenames, sys.stdout)