Mercurial > hg
view tests/test-bundle2-remote-changegroup.t @ 32697:19b9fc40cc51
revlog: skeleton support for version 2 revlogs
There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.
It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.
This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.
An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.
To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.
Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.
There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Fri, 19 May 2017 20:29:11 -0700 |
parents | f28f2ac65c66 |
children | 75be14993fda |
line wrap: on
line source
#require killdaemons Create an extension to test bundle2 remote-changegroup parts $ cat > bundle2.py << EOF > """A small extension to test bundle2 remote-changegroup parts. > > Current bundle2 implementation doesn't provide a way to generate those > parts, so they must be created by extensions. > """ > from mercurial import bundle2, changegroup, discovery, exchange, util > > def _getbundlechangegrouppart(bundler, repo, source, bundlecaps=None, > b2caps=None, heads=None, common=None, > **kwargs): > """this function replaces the changegroup part handler for getbundle. > It allows to create a set of arbitrary parts containing changegroups > and remote-changegroups, as described in a bundle2maker file in the > repository .hg/ directory. > > Each line of that bundle2maker file contain a description of the > part to add: > - changegroup common_revset heads_revset > Creates a changegroup part based, using common_revset and > heads_revset for outgoing > - remote-changegroup url file > Creates a remote-changegroup part for a bundle at the given > url. Size and digest, as required by the client, are computed > from the given file. > - raw-remote-changegroup <python expression> > Creates a remote-changegroup part with the data given in the > python expression as parameters. The python expression is > evaluated with eval, and is expected to be a dict. > """ > def newpart(name, data=''): > """wrapper around bundler.newpart adding an extra part making the > client output information about each processed part""" > bundler.newpart('output', data=name) > part = bundler.newpart(name, data=data) > return part > > for line in open(repo.vfs.join('bundle2maker'), 'r'): > line = line.strip() > try: > verb, args = line.split(None, 1) > except ValueError: > verb, args = line, '' > if verb == 'remote-changegroup': > url, file = args.split() > bundledata = open(file, 'rb').read() > digest = util.digester.preferred(b2caps['digests']) > d = util.digester([digest], bundledata) > part = newpart('remote-changegroup') > part.addparam('url', url) > part.addparam('size', str(len(bundledata))) > part.addparam('digests', digest) > part.addparam('digest:%s' % digest, d[digest]) > elif verb == 'raw-remote-changegroup': > part = newpart('remote-changegroup') > for k, v in eval(args).items(): > part.addparam(k, str(v)) > elif verb == 'changegroup': > _common, heads = args.split() > common.extend(repo.lookup(r) for r in repo.revs(_common)) > heads = [repo.lookup(r) for r in repo.revs(heads)] > outgoing = discovery.outgoing(repo, common, heads) > cg = changegroup.getchangegroup(repo, 'changegroup', outgoing) > newpart('changegroup', cg.getchunks()) > else: > raise Exception('unknown verb') > > exchange.getbundle2partsmapping['changegroup'] = _getbundlechangegrouppart > EOF Start a simple HTTP server to serve bundles $ python "$TESTDIR/dumbhttp.py" -p $HGPORT --pid dumb.pid $ cat dumb.pid >> $DAEMON_PIDS $ cat >> $HGRCPATH << EOF > [ui] > ssh=python "$TESTDIR/dummyssh" > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline} > EOF $ hg init repo $ hg -R repo unbundle $TESTDIR/bundles/rebase.hg adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) (run 'hg heads' to see heads, 'hg merge' to merge) $ hg -R repo log -G o 7:02de42196ebe draft Nicolas Dumazet <nicdumz.commits@gmail.com> H | | o 6:eea13746799a draft Nicolas Dumazet <nicdumz.commits@gmail.com> G |/| o | 5:24b6387c8c8c draft Nicolas Dumazet <nicdumz.commits@gmail.com> F | | | o 4:9520eea781bc draft Nicolas Dumazet <nicdumz.commits@gmail.com> E |/ | o 3:32af7686d403 draft Nicolas Dumazet <nicdumz.commits@gmail.com> D | | | o 2:5fddd98957c8 draft Nicolas Dumazet <nicdumz.commits@gmail.com> C | | | o 1:42ccdea3bb16 draft Nicolas Dumazet <nicdumz.commits@gmail.com> B |/ o 0:cd010b8cd998 draft Nicolas Dumazet <nicdumz.commits@gmail.com> A $ hg clone repo orig updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat > repo/.hg/hgrc << EOF > [extensions] > bundle2=$TESTTMP/bundle2.py > EOF Test a pull with an remote-changegroup $ hg bundle -R repo --type v1 --base '0:4' -r '5:7' bundle.hg 3 changesets found $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/bundle.hg bundle.hg > EOF $ hg clone orig clone -r 3 -r 4 adding changesets adding manifests adding file changes added 5 changesets with 5 changes to 5 files (+1 heads) updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup adding changesets adding manifests adding file changes added 3 changesets with 2 changes to 2 files (+1 heads) (run 'hg heads .' to see heads, 'hg merge' to merge) $ hg -R clone log -G o 7:02de42196ebe public Nicolas Dumazet <nicdumz.commits@gmail.com> H | | o 6:eea13746799a public Nicolas Dumazet <nicdumz.commits@gmail.com> G |/| o | 5:24b6387c8c8c public Nicolas Dumazet <nicdumz.commits@gmail.com> F | | | o 4:9520eea781bc public Nicolas Dumazet <nicdumz.commits@gmail.com> E |/ | @ 3:32af7686d403 public Nicolas Dumazet <nicdumz.commits@gmail.com> D | | | o 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | | | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B |/ o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A $ rm -rf clone Test a pull with an remote-changegroup and a following changegroup $ hg bundle -R repo --type v1 --base 2 -r '3:4' bundle2.hg 2 changesets found $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/bundle2.hg bundle2.hg > changegroup 0:4 5:7 > EOF $ hg clone orig clone -r 2 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+1 heads) remote: changegroup adding changesets adding manifests adding file changes added 3 changesets with 2 changes to 2 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) $ hg -R clone log -G o 7:02de42196ebe public Nicolas Dumazet <nicdumz.commits@gmail.com> H | | o 6:eea13746799a public Nicolas Dumazet <nicdumz.commits@gmail.com> G |/| o | 5:24b6387c8c8c public Nicolas Dumazet <nicdumz.commits@gmail.com> F | | | o 4:9520eea781bc public Nicolas Dumazet <nicdumz.commits@gmail.com> E |/ | o 3:32af7686d403 public Nicolas Dumazet <nicdumz.commits@gmail.com> D | | | @ 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | | | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B |/ o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A $ rm -rf clone Test a pull with a changegroup followed by an remote-changegroup $ hg bundle -R repo --type v1 --base '0:4' -r '5:7' bundle3.hg 3 changesets found $ cat > repo/.hg/bundle2maker << EOF > changegroup 000000000000 :4 > remote-changegroup http://localhost:$HGPORT/bundle3.hg bundle3.hg > EOF $ hg clone orig clone -r 2 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: changegroup adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+1 heads) remote: remote-changegroup adding changesets adding manifests adding file changes added 3 changesets with 2 changes to 2 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) $ hg -R clone log -G o 7:02de42196ebe public Nicolas Dumazet <nicdumz.commits@gmail.com> H | | o 6:eea13746799a public Nicolas Dumazet <nicdumz.commits@gmail.com> G |/| o | 5:24b6387c8c8c public Nicolas Dumazet <nicdumz.commits@gmail.com> F | | | o 4:9520eea781bc public Nicolas Dumazet <nicdumz.commits@gmail.com> E |/ | o 3:32af7686d403 public Nicolas Dumazet <nicdumz.commits@gmail.com> D | | | @ 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | | | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B |/ o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A $ rm -rf clone Test a pull with two remote-changegroups and a changegroup $ hg bundle -R repo --type v1 --base 2 -r '3:4' bundle4.hg 2 changesets found $ hg bundle -R repo --type v1 --base '3:4' -r '5:6' bundle5.hg 2 changesets found $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/bundle4.hg bundle4.hg > remote-changegroup http://localhost:$HGPORT/bundle5.hg bundle5.hg > changegroup 0:6 7 > EOF $ hg clone orig clone -r 2 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+1 heads) remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 1 changes to 1 files remote: changegroup adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) (run 'hg heads' to see heads, 'hg merge' to merge) $ hg -R clone log -G o 7:02de42196ebe public Nicolas Dumazet <nicdumz.commits@gmail.com> H | | o 6:eea13746799a public Nicolas Dumazet <nicdumz.commits@gmail.com> G |/| o | 5:24b6387c8c8c public Nicolas Dumazet <nicdumz.commits@gmail.com> F | | | o 4:9520eea781bc public Nicolas Dumazet <nicdumz.commits@gmail.com> E |/ | o 3:32af7686d403 public Nicolas Dumazet <nicdumz.commits@gmail.com> D | | | @ 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | | | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B |/ o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A $ rm -rf clone Hash digest tests $ hg bundle -R repo --type v1 -a bundle6.hg 8 changesets found $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'sha1', 'digest:sha1': '2c880cfec23cff7d8f80c2f12958d1563cbdaba6'} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ rm -rf clone $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'md5', 'digest:md5': 'e22172c2907ef88794b7bea6642c2394'} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ rm -rf clone Hash digest mismatch throws an error $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'sha1', 'digest:sha1': '0' * 40} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) transaction abort! rollback completed abort: bundle at http://localhost:$HGPORT/bundle6.hg is corrupted: sha1 mismatch: expected 0000000000000000000000000000000000000000, got 2c880cfec23cff7d8f80c2f12958d1563cbdaba6 [255] Multiple hash digests can be given $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'md5 sha1', 'digest:md5': 'e22172c2907ef88794b7bea6642c2394', 'digest:sha1': '2c880cfec23cff7d8f80c2f12958d1563cbdaba6'} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ rm -rf clone If either of the multiple hash digests mismatches, an error is thrown $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'md5 sha1', 'digest:md5': '0' * 32, 'digest:sha1': '2c880cfec23cff7d8f80c2f12958d1563cbdaba6'} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) transaction abort! rollback completed abort: bundle at http://localhost:$HGPORT/bundle6.hg is corrupted: md5 mismatch: expected 00000000000000000000000000000000, got e22172c2907ef88794b7bea6642c2394 [255] $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle6.hg', 'size': 1663, 'digests': 'md5 sha1', 'digest:md5': 'e22172c2907ef88794b7bea6642c2394', 'digest:sha1': '0' * 40} > EOF $ hg clone ssh://user@dummy/repo clone requesting all changes remote: remote-changegroup adding changesets adding manifests adding file changes added 8 changesets with 7 changes to 7 files (+2 heads) transaction abort! rollback completed abort: bundle at http://localhost:$HGPORT/bundle6.hg is corrupted: sha1 mismatch: expected 0000000000000000000000000000000000000000, got 2c880cfec23cff7d8f80c2f12958d1563cbdaba6 [255] Corruption tests $ hg clone orig clone -r 2 adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 3 files updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/bundle4.hg bundle4.hg > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle5.hg', 'size': 578, 'digests': 'sha1', 'digest:sha1': '0' * 40} > changegroup 0:6 7 > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+1 heads) remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 1 changes to 1 files transaction abort! rollback completed abort: bundle at http://localhost:$HGPORT/bundle5.hg is corrupted: sha1 mismatch: expected 0000000000000000000000000000000000000000, got f29485d6bfd37db99983cfc95ecb52f8ca396106 [255] The entire transaction has been rolled back in the pull above $ hg -R clone log -G @ 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B | o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A No params $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: remote-changegroup: missing "url" param [255] Missing size $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle4.hg'} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: remote-changegroup: missing "size" param [255] Invalid size $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle4.hg', 'size': 'foo'} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: remote-changegroup: invalid value for param "size" [255] Size mismatch $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle4.hg', 'size': 42} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+1 heads) transaction abort! rollback completed abort: bundle at http://localhost:$HGPORT/bundle4.hg is corrupted: size mismatch: expected 42, got 581 [255] Unknown digest $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle4.hg', 'size': 581, 'digests': 'foo', 'digest:foo': 'bar'} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: missing support for remote-changegroup - digest:foo [255] Missing digest $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'http://localhost:$HGPORT/bundle4.hg', 'size': 581, 'digests': 'sha1'} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: remote-changegroup: missing "digest:sha1" param [255] Not an HTTP url $ cat > repo/.hg/bundle2maker << EOF > raw-remote-changegroup {'url': 'ssh://localhost:$HGPORT/bundle4.hg', 'size': 581} > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: remote-changegroup does not support ssh urls [255] Not a bundle $ cat > notbundle.hg << EOF > foo > EOF $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/notbundle.hg notbundle.hg > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: http://localhost:$HGPORT/notbundle.hg: not a Mercurial bundle [255] Not a bundle 1.0 $ cat > notbundle10.hg << EOF > HG20 > EOF $ cat > repo/.hg/bundle2maker << EOF > remote-changegroup http://localhost:$HGPORT/notbundle10.hg notbundle10.hg > EOF $ hg pull -R clone ssh://user@dummy/repo pulling from ssh://user@dummy/repo searching for changes remote: remote-changegroup abort: http://localhost:$HGPORT/notbundle10.hg: not a bundle version 1.0 [255] $ hg -R clone log -G @ 2:5fddd98957c8 public Nicolas Dumazet <nicdumz.commits@gmail.com> C | o 1:42ccdea3bb16 public Nicolas Dumazet <nicdumz.commits@gmail.com> B | o 0:cd010b8cd998 public Nicolas Dumazet <nicdumz.commits@gmail.com> A $ rm -rf clone $ killdaemons.py