view tests/test-contrib-check-code.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

  $ cat > correct.py <<EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > EOF
  $ cat > wrong.py <<EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > EOF
  $ cat > quote.py <<EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > EOF
  $ cat > classstyle.py <<EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() creates old style object, use class foo(object)
  [1]
  $ cat > python3-compat.py << EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > foo.c <<EOF
  > void narf() {
  > 	strcpy(foo, bar);
  > 	// strcpy_s is okay, but this comment is not
  > 	strcpy_s(foo, bar);
  > }
  > EOF
  $ "$check_code" ./foo.c
  ./foo.c:2:
   > 	strcpy(foo, bar);
   don't use strcpy, use strlcpy or memcpy
  ./foo.c:3:
   > 	// strcpy_s is okay, but this comment is not
   don't use //-style comments
  [1]

  $ cat > is-op.py <<EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<EOF
  > except:
  > EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > error.t <<EOF
  >   $ [ foo == bar ]
  > EOF
  $ "$check_code" error.t
  error.t:1:
   >   $ [ foo == bar ]
   [ foo == bar ] is a bashism, use [ foo = bar ] instead
  [1]
  $ rm error.t
  $ cat > raise-format.py <<EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat > rst.py <<EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<EOF
  > print _("map inside gettext %s" % v)
  > 
  > print _("concatenating " " by " " space %s" % v)
  > print _("concatenating " + " by " + " '+' %s" % v)
  > 
  > print _("mapping operation in different line %s"
  >         % v)
  > 
  > print _(
  >         "leading spaces inside of '(' %s" % v)
  > EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print _("map inside gettext %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print _("concatenating " " by " " space %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print _("concatenating " + " by " + " '+' %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print _("mapping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print _(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]

'string join across lines with no space' detection

  $ cat > stringjoin.py <<EOF
  > foo = (' foo'
  >        'bar foo.'
  >        'bar foo:'
  >        'bar foo@'
  >        'bar foo%'
  >        'bar foo*'
  >        'bar foo+'
  >        'bar foo-'
  >        'bar')
  > EOF

'missing _() in ui message' detection

  $ cat > uigettext.py <<EOF
  > ui.status("% 10s %05d % -3.2f %*s %%"
  >           # this use '\\\\' instead of '\\', because the latter in
  >           # heredoc on shell becomes just '\'
  >           '\\\\ \n \t \0'
  >           """12345
  >           """
  >           '''.:*+-=
  >           ''' "%-6d \n 123456 .:*+-= foobar")
  > EOF

(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)

  $ "$check_code" stringjoin.py uigettext.py
  stringjoin.py:1:
   > foo = (' foo'
   string join across lines with no space
  stringjoin.py:2:
   >        'bar foo.'
   string join across lines with no space
  stringjoin.py:3:
   >        'bar foo:'
   string join across lines with no space
  stringjoin.py:4:
   >        'bar foo@'
   string join across lines with no space
  stringjoin.py:5:
   >        'bar foo%'
   string join across lines with no space
  stringjoin.py:6:
   >        'bar foo*'
   string join across lines with no space
  stringjoin.py:7:
   >        'bar foo+'
   string join across lines with no space
  stringjoin.py:8:
   >        'bar foo-'
   string join across lines with no space
  uigettext.py:1:
   > ui.status("% 10s %05d % -3.2f %*s %%"
   missing _() in ui message (use () to hide false-positives)
  [1]