view tests/test-convert-splicemap.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert=" >> $HGRCPATH
  $ glog()
  > {
  >     hg log -G --template '{rev}:{node|short} "{desc|firstline}"\
  >  files: {files}\n' "$@"
  > }
  $ hg init repo1
  $ cd repo1
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo b > b
  $ echo a >> a
  $ hg ci -Am addb
  adding b
  $ PARENTID1=`hg id --debug -i`
  $ echo c > c
  $ hg ci -Am addc
  adding c
  $ PARENTID2=`hg id --debug -i`
  $ cd ..
  $ glog -R repo1
  @  2:e55c719b85b6 "addc" files: c
  |
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  

  $ hg init repo2
  $ cd repo2
  $ echo b > a
  $ echo d > d
  $ hg ci -Am addaandd
  adding a
  adding d
  $ INVALIDID1=afd12345af
  $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86
  $ CHILDID1=`hg id --debug -i`
  $ echo d >> d
  $ hg ci -Am changed
  $ CHILDID2=`hg id --debug -i`
  $ echo e > e
  $ hg ci -Am adde
  adding e
  $ cd ..
  $ glog -R repo2
  @  2:a39b65753b0a "adde" files: e
  |
  o  1:e4ea00df9189 "changed" files: d
  |
  o  0:527cdedf31fb "addaandd" files: a d
  

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $CHILDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap2

  $ cat > splicemap <<EOF
  > $CHILDID2 $PARENTID1, $PARENTID2, $PARENTID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap3

  $ cat > splicemap <<EOF
  > $INVALIDID1 $INVALIDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: splicemap entry afd12345af is not a valid revision identifier
  [255]

splice repo2 on repo1

  $ cat > splicemap <<EOF
  > $CHILDID1 $PARENTID1
  > $CHILDID2 $PARENTID2,$CHILDID1
  > 
  > EOF
  $ cat splicemap
  527cdedf31fbd5ea708aa14eeecf53d4676f38db 6d4c2037ddc2cb2627ac3a244ecce35283268f8e
  e4ea00df91897da3079a10fab658c1eddba6617b e55c719b85b60e5102fac26110ba626e7cb6b7dc,527cdedf31fbd5ea708aa14eeecf53d4676f38db
  
  $ hg clone repo1 target1
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg convert --splicemap splicemap repo2 target1
  scanning source...
  sorting...
  converting...
  2 addaandd
  spliced in 6d4c2037ddc2cb2627ac3a244ecce35283268f8e as parents of 527cdedf31fbd5ea708aa14eeecf53d4676f38db
  1 changed
  spliced in e55c719b85b60e5102fac26110ba626e7cb6b7dc and 527cdedf31fbd5ea708aa14eeecf53d4676f38db as parents of e4ea00df91897da3079a10fab658c1eddba6617b
  0 adde
  $ glog -R target1
  o  5:16bc847b02aa "adde" files: e
  |
  o    4:e30e4fee3418 "changed" files: d
  |\
  | o  3:e673348c3a3c "addaandd" files: a d
  | |
  @ |  2:e55c719b85b6 "addc" files: c
  |/
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  



Test splicemap and conversion order

  $ hg init ordered
  $ cd ordered
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo a >> a
  $ hg ci -Am changea
  $ echo a >> a
  $ hg ci -Am changeaagain
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > b
  $ hg ci -Am addb
  adding b

We want 2 to depend on 1 and 3. Since 3 is always converted after 2,
the bug should be exhibited with all conversion orders.

  $ cat > ../splicemap <<EOF
  > `(hg id -r 2 -i --debug)` `(hg id -r 1 -i --debug)`, `(hg id -r 3 -i --debug)`
  > EOF
  $ cd ..
  $ cat splicemap
  7c364e7fa7d70ae525610c016317ed717b519d97 717d54d67e6c31fd75ffef2ff3042bdd98418437, 102a90ea7b4a3361e4082ed620918c261189a36a

Test regular conversion

  $ hg convert --splicemap splicemap ordered ordered-hg1
  initializing destination ordered-hg1 repository
  scanning source...
  sorting...
  converting...
  3 adda
  2 changea
  1 addb
  0 changeaagain
  spliced in 717d54d67e6c31fd75ffef2ff3042bdd98418437 and 102a90ea7b4a3361e4082ed620918c261189a36a as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg1
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test conversion with parent revisions already in dest, using source
and destination identifiers. Test unknown splicemap target.

  $ hg convert -r1 ordered ordered-hg2
  initializing destination ordered-hg2 repository
  scanning source...
  sorting...
  converting...
  1 adda
  0 changea
  $ hg convert -r3 ordered ordered-hg2
  scanning source...
  sorting...
  converting...
  0 addb
  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > `(hg -R ordered-hg2 id -r 1 -i --debug)`,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > deadbeef102a90ea7b4a3361e4082ed620918c26 deadbeef102a90ea7b4a3361e4082ed620918c27
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...
  0 changeaagain
  spliced in 717d54d67e6c31fd75ffef2ff3042bdd98418437 and 102a90ea7b4a3361e4082ed620918c261189a36a as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg2
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test empty conversion

  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...

Test clonebranches

  $ hg --config convert.hg.clonebranches=true convert \
  >   --splicemap splicemap ordered ordered-hg3
  initializing destination ordered-hg3 repository
  scanning source...
  abort: revision 717d54d67e6c31fd75ffef2ff3042bdd98418437 not found in destination repository (lookups with clonebranches=true are not implemented)
  [255]

Test invalid dependency

  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > deadbeef102a90ea7b4a3361e4082ed620918c26,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg4
  initializing destination ordered-hg4 repository
  scanning source...
  abort: unknown splice map parent: deadbeef102a90ea7b4a3361e4082ed620918c26
  [255]