view tests/test-copy.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# enable bundle2 in advance

  $ cat << EOF >> $HGRCPATH
  > [format]
  > usegeneraldelta=yes
  > EOF

  $ mkdir part1
  $ cd part1

  $ hg init
  $ echo a > a
  $ hg add a
  $ hg commit -m "1"
  $ hg status
  $ hg copy a b
  $ hg --config ui.portablefilenames=abort copy a con.xml
  abort: filename contains 'con', which is reserved on Windows: 'con.xml'
  [255]
  $ hg status
  A b
  $ hg sum
  parent: 0:c19d34741b0a tip
   1
  branch: default
  commit: 1 copied
  update: (current)
  phases: 1 draft
  $ hg --debug commit -m "2"
  committing files:
  b
   b: copy a:b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  committing manifest
  committing changelog
  updating the branch cache
  committed changeset 1:93580a2c28a50a56f63526fb305067e6fbf739c4

we should see two history entries

  $ hg history -v
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       b
  description:
  2
  
  
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       a
  description:
  1
  
  

we should see one log entry for a

  $ hg log a
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  

this should show a revision linked to changeset 0

  $ hg debugindex a
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b789fdd96dc2 000000000000 000000000000 (re)

we should see one log entry for b

  $ hg log b
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2
  

this should show a revision linked to changeset 1

  $ hg debugindex b
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      65  .....       1 37d9b5d994ea 000000000000 000000000000 (re)

this should show the rename information in the metadata

  $ hg debugdata b 0 | head -3 | tail -2
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3

  $ md5sum.py .hg/store/data/b.i
  44913824c8f5890ae218f9829535922e  .hg/store/data/b.i
  $ hg cat b > bsum
  $ md5sum.py bsum
  60b725f10c9c85c70d97880dfe8191b3  bsum
  $ hg cat a > asum
  $ md5sum.py asum
  60b725f10c9c85c70d97880dfe8191b3  asum
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd ..


  $ mkdir part2
  $ cd part2

  $ hg init
  $ echo foo > foo
should fail - foo is not managed
  $ hg mv foo bar
  foo: not copying - file is not managed
  abort: no files to copy
  [255]
  $ hg st -A
  ? foo
  $ hg add foo
dry-run; print a warning that this is not a real copy; foo is added
  $ hg mv --dry-run foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A foo
should print a warning that this is not a real copy; bar is added
  $ hg mv foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A bar
should print a warning that this is not a real copy; foo is added
  $ hg cp bar foo
  bar has not been committed yet, so no copy data will be stored for foo.
  $ hg rm -f bar
  $ rm bar
  $ hg st -A
  A foo
  $ hg commit -m1

moving a missing file
  $ rm foo
  $ hg mv foo foo3
  foo: deleted in working directory
  foo3 does not exist!
  $ hg up -qC .

copy --after to a nonexistent target filename
  $ hg cp -A foo dummy
  foo: not recording copy - dummy does not exist

dry-run; should show that foo is clean
  $ hg copy --dry-run foo bar
  $ hg st -A
  C foo
should show copy
  $ hg copy foo bar
  $ hg st -C
  A bar
    foo

shouldn't show copy
  $ hg commit -m2
  $ hg st -C

should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:2ed2a3912a0b24502043eae84ee4b279c18b90dd

  $ echo bleah > foo
  $ echo quux > bar
  $ hg commit -m3

should not be renamed
  $ hg debugrename bar
  bar not renamed

  $ hg copy -f foo bar
should show copy
  $ hg st -C
  M bar
    foo

XXX: filtering lfilesrepo.status() in 3.3-rc causes the copy source to not be
displayed.
  $ hg st -C --config extensions.largefiles=
  M bar
    foo

  $ hg commit -m3

should show no parents for tip
  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      69  .....       1 7711d36246cc 000000000000 000000000000 (re)
       1        69       6  .....       2 bdf70a2b8d03 7711d36246cc 000000000000 (re)
       2        75      71  .....       3 b2558327ea8d 000000000000 000000000000 (re)
should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
       1         5       7  .....       2 dd12c926cf16 2ed2a3912a0b 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:dd12c926cf165e3eb4cf87b084955cb617221c17

should show no copies
  $ hg st -C

copy --after on an added file
  $ cp bar baz
  $ hg add baz
  $ hg cp -A bar baz
  $ hg st -C
  A baz
    bar

foo was clean:
  $ hg st -AC foo
  C foo
Trying to copy on top of an existing file fails,
  $ hg copy -A bar foo
  foo: not overwriting - file already committed
  (hg copy --after --force to replace the file by recording a copy)
same error without the --after, so the user doesn't have to go through
two hints:
  $ hg copy bar foo
  foo: not overwriting - file already committed
  (hg copy --force to replace the file by recording a copy)
but it's considered modified after a copy --after --force
  $ hg copy -Af bar foo
  $ hg st -AC foo
  M foo
    bar
The hint for a file that exists but is not in file history doesn't
mention --force:
  $ touch xyzzy
  $ hg cp bar xyzzy
  xyzzy: not overwriting - file exists
  (hg copy --after to record the copy)

  $ cd ..