view tests/test-diff-binary-file.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

  $ hg init a
  $ cd a
  $ cp "$TESTDIR/binfile.bin" .
  $ hg add binfile.bin
  $ hg ci -m 'add binfile.bin'

  $ echo >> binfile.bin
  $ hg ci -m 'change binfile.bin'

  $ hg revert -r 0 binfile.bin
  $ hg ci -m 'revert binfile.bin'
  $ hg cp binfile.bin nonbinfile
  $ echo text > nonbinfile
  $ hg ci -m 'make non-binary copy of binary file'

  $ hg diff --nodates -r 0 -r 1
  diff -r 48b371597640 -r acea2ab458c8 binfile.bin
  Binary file binfile.bin has changed

  $ hg diff --nodates -r 0 -r 2

  $ hg diff --git -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  index 37ba3d1c6f17137d9c5f5776fa040caf5fe73ff9..58dc31a9e2f40f74ff3b45903f7d620b8e5b7356
  GIT binary patch
  literal 594
  zc$@)J0<HatP)<h;3K|Lk000e1NJLTq000mG000mO0ssI2kdbIM00009a7bBm000XU
  z000XU0RWnu7ytkO2XskIMF-Uh9TW;VpMjwv0005-Nkl<ZD9@FWPs=e;7{<>W$NUkd
  zX$nnYLt$-$V!?uy+1V%`z&Eh=ah|duER<4|QWhju3gb^nF*8iYobxWG-qqXl=2~5M
  z*IoDB)sG^CfNuoBmqLTVU^<;@nwHP!1wrWd`{(mHo6VNXWtyh{alzqmsH*yYzpvLT
  zLdY<T=ks|woh-`&01!ej#(xbV1f|pI*=%;d-%F*E*X#ZH`4I%6SS+$EJDE&ct=8po
  ziN#{?_j|kD%Cd|oiqds`xm@;oJ-^?NG3Gdqrs?5u*zI;{nogxsx~^|Fn^Y?Gdc6<;
  zfMJ+iF1J`LMx&A2?dEwNW8ClebzPTbIh{@$hS6*`kH@1d%Lo7fA#}N1)oN7`gm$~V
  z+wDx#)OFqMcE{s!JN0-xhG8ItAjVkJwEcb`3WWlJfU2r?;Pd%dmR+q@mSri5q9_W-
  zaR2~ECX?B2w+zELozC0s*6Z~|QG^f{3I#<`?)Q7U-JZ|q5W;9Q8i_=pBuSzunx=U;
  z9C)5jBoYw9^?EHyQl(M}1OlQcCX>lXB*ODN003Z&P17_@)3Pi=i0wb04<W?v-u}7K
  zXmmQA+wDgE!qR9o8jr`%=ab_&uh(l?R=r;Tjiqon91I2-hIu?57~@*4h7h9uORK#=
  gQItJW-{SoTm)8|5##k|m00000NkvXXu0mjf3JwksH2?qr
  

  $ hg diff --git -r 0 -r 2

  $ hg diff --config diff.nobinary=True --git -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  Binary file binfile.bin has changed

  $ HGPLAIN=1 hg diff --config diff.nobinary=True --git -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  index 37ba3d1c6f17137d9c5f5776fa040caf5fe73ff9..58dc31a9e2f40f74ff3b45903f7d620b8e5b7356
  GIT binary patch
  literal 594
  zc$@)J0<HatP)<h;3K|Lk000e1NJLTq000mG000mO0ssI2kdbIM00009a7bBm000XU
  z000XU0RWnu7ytkO2XskIMF-Uh9TW;VpMjwv0005-Nkl<ZD9@FWPs=e;7{<>W$NUkd
  zX$nnYLt$-$V!?uy+1V%`z&Eh=ah|duER<4|QWhju3gb^nF*8iYobxWG-qqXl=2~5M
  z*IoDB)sG^CfNuoBmqLTVU^<;@nwHP!1wrWd`{(mHo6VNXWtyh{alzqmsH*yYzpvLT
  zLdY<T=ks|woh-`&01!ej#(xbV1f|pI*=%;d-%F*E*X#ZH`4I%6SS+$EJDE&ct=8po
  ziN#{?_j|kD%Cd|oiqds`xm@;oJ-^?NG3Gdqrs?5u*zI;{nogxsx~^|Fn^Y?Gdc6<;
  zfMJ+iF1J`LMx&A2?dEwNW8ClebzPTbIh{@$hS6*`kH@1d%Lo7fA#}N1)oN7`gm$~V
  z+wDx#)OFqMcE{s!JN0-xhG8ItAjVkJwEcb`3WWlJfU2r?;Pd%dmR+q@mSri5q9_W-
  zaR2~ECX?B2w+zELozC0s*6Z~|QG^f{3I#<`?)Q7U-JZ|q5W;9Q8i_=pBuSzunx=U;
  z9C)5jBoYw9^?EHyQl(M}1OlQcCX>lXB*ODN003Z&P17_@)3Pi=i0wb04<W?v-u}7K
  zXmmQA+wDgE!qR9o8jr`%=ab_&uh(l?R=r;Tjiqon91I2-hIu?57~@*4h7h9uORK#=
  gQItJW-{SoTm)8|5##k|m00000NkvXXu0mjf3JwksH2?qr
  


  $ hg diff --git -r 2 -r 3
  diff --git a/binfile.bin b/nonbinfile
  copy from binfile.bin
  copy to nonbinfile
  index 37ba3d1c6f17137d9c5f5776fa040caf5fe73ff9..8e27be7d6154a1f68ea9160ef0e18691d20560dc
  GIT binary patch
  literal 5
  Mc$_OqttjCF00uV!&;S4c
  
  $ cd ..

Test text mode with extended git-style diff format
  $ hg init b
  $ cd b
  $ cat > writebin.py <<EOF
  > import sys
  > path = sys.argv[1]
  > open(path, 'wb').write('\x00\x01\x02\x03')
  > EOF
  $ python writebin.py binfile.bin
  $ hg add binfile.bin
  $ hg ci -m 'add binfile.bin'

  $ echo >> binfile.bin
  $ hg ci -m 'change binfile.bin'

  $ hg diff --git -a -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  --- a/binfile.bin
  +++ b/binfile.bin
  @@ -1,1 +1,1 @@
  -\x00\x01\x02\x03 (esc)
  \ No newline at end of file
  +\x00\x01\x02\x03 (esc)

  $ HGPLAIN=1 hg diff --git -a -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  --- a/binfile.bin
  +++ b/binfile.bin
  @@ -1,1 +1,1 @@
  -\x00\x01\x02\x03 (esc)
  \ No newline at end of file
  +\x00\x01\x02\x03 (esc)

Test binary mode with extended git-style diff format
  $ hg diff --no-binary -r 0 -r 1
  diff -r fb45f71337ad -r 9ca112d1a3c1 binfile.bin
  Binary file binfile.bin has changed

  $ hg diff --git --no-binary -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  Binary file binfile.bin has changed

  $ hg diff --git --binary -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  index eaf36c1daccfdf325514461cd1a2ffbc139b5464..ba71a782e93f3fb63a428383706065e3ec2828e9
  GIT binary patch
  literal 5
  Mc${NkWMbw50018V5dZ)H
  
  $ hg diff --git --binary --config diff.nobinary=True -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  index eaf36c1daccfdf325514461cd1a2ffbc139b5464..ba71a782e93f3fb63a428383706065e3ec2828e9
  GIT binary patch
  literal 5
  Mc${NkWMbw50018V5dZ)H
  

  $ hg diff --git --binary --text -r 0 -r 1
  diff --git a/binfile.bin b/binfile.bin
  --- a/binfile.bin
  +++ b/binfile.bin
  @@ -1,1 +1,1 @@
  -\x00\x01\x02\x03 (esc)
  \ No newline at end of file
  +\x00\x01\x02\x03 (esc)

  $ cd ..