Mercurial > hg
view tests/test-fileset.t @ 32697:19b9fc40cc51
revlog: skeleton support for version 2 revlogs
There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.
It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.
This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.
An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.
To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.
Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.
There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Fri, 19 May 2017 20:29:11 -0700 |
parents | 67ea8e857489 |
children | 7bbc4e113e5f |
line wrap: on
line source
$ fileset() { > hg debugfileset "$@" > } $ hg init repo $ cd repo $ echo a > a1 $ echo a > a2 $ echo b > b1 $ echo b > b2 $ hg ci -Am addfiles adding a1 adding a2 adding b1 adding b2 Test operators and basic patterns $ fileset -v a1 ('symbol', 'a1') a1 $ fileset -v 'a*' ('symbol', 'a*') a1 a2 $ fileset -v '"re:a\d"' ('string', 're:a\\d') a1 a2 $ fileset -v 'a1 or a2' (or ('symbol', 'a1') ('symbol', 'a2')) a1 a2 $ fileset 'a1 | a2' a1 a2 $ fileset 'a* and "*1"' a1 $ fileset 'a* & "*1"' a1 $ fileset 'not (r"a*")' b1 b2 $ fileset '! ("a*")' b1 b2 $ fileset 'a* - a1' a2 $ fileset 'a_b' $ fileset '"\xy"' hg: parse error: invalid \x escape [255] Test files status $ rm a1 $ hg rm a2 $ echo b >> b2 $ hg cp b1 c1 $ echo c > c2 $ echo c > c3 $ cat > .hgignore <<EOF > \.hgignore > 2$ > EOF $ fileset 'modified()' b2 $ fileset 'added()' c1 $ fileset 'removed()' a2 $ fileset 'deleted()' a1 $ fileset 'missing()' a1 $ fileset 'unknown()' c3 $ fileset 'ignored()' .hgignore c2 $ fileset 'hgignore()' a2 b2 $ fileset 'clean()' b1 $ fileset 'copied()' c1 Test files status in different revisions $ hg status -m M b2 $ fileset -r0 'revs("wdir()", modified())' --traceback b2 $ hg status -a A c1 $ fileset -r0 'revs("wdir()", added())' c1 $ hg status --change 0 -a A a1 A a2 A b1 A b2 $ hg status -mru M b2 R a2 ? c3 $ fileset -r0 'added() and revs("wdir()", modified() or removed() or unknown())' b2 a2 $ fileset -r0 'added() or revs("wdir()", added())' a1 a2 b1 b2 c1 Test files properties >>> file('bin', 'wb').write('\0a') $ fileset 'binary()' $ fileset 'binary() and unknown()' bin $ echo '^bin$' >> .hgignore $ fileset 'binary() and ignored()' bin $ hg add bin $ fileset 'binary()' bin $ fileset 'grep("b{1}")' b2 c1 b1 $ fileset 'grep("missingparens(")' hg: parse error: invalid match pattern: unbalanced parenthesis [255] #if execbit $ chmod +x b2 $ fileset 'exec()' b2 #endif #if symlink $ ln -s b2 b2link $ fileset 'symlink() and unknown()' b2link $ hg add b2link #endif #if no-windows $ echo foo > con.xml $ fileset 'not portable()' con.xml $ hg --config ui.portablefilenames=ignore add con.xml #endif >>> file('1k', 'wb').write(' '*1024) >>> file('2k', 'wb').write(' '*2048) $ hg add 1k 2k $ fileset 'size("bar")' hg: parse error: couldn't parse size: bar [255] $ fileset '(1k, 2k)' hg: parse error: can't use a list in this context (see hg help "filesets.x or y") [255] $ fileset 'size(1k)' 1k $ fileset '(1k or 2k) and size("< 2k")' 1k $ fileset '(1k or 2k) and size("<=2k")' 1k 2k $ fileset '(1k or 2k) and size("> 1k")' 2k $ fileset '(1k or 2k) and size(">=1K")' 1k 2k $ fileset '(1k or 2k) and size(".5KB - 1.5kB")' 1k $ fileset 'size("1M")' $ fileset 'size("1 GB")' Test merge states $ hg ci -m manychanges $ hg up -C 0 * files updated, 0 files merged, * files removed, 0 files unresolved (glob) $ echo c >> b2 $ hg ci -m diverging b2 created new head $ fileset 'resolved()' $ fileset 'unresolved()' $ hg merge merging b2 warning: conflicts while merging b2! (edit, then use 'hg resolve --mark') * files updated, 0 files merged, 1 files removed, 1 files unresolved (glob) use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon [1] $ fileset 'resolved()' $ fileset 'unresolved()' b2 $ echo e > b2 $ hg resolve -m b2 (no more unresolved files) $ fileset 'resolved()' b2 $ fileset 'unresolved()' $ hg ci -m merge Test subrepo predicate $ hg init sub $ echo a > sub/suba $ hg -R sub add sub/suba $ hg -R sub ci -m sub $ echo 'sub = sub' > .hgsub $ hg init sub2 $ echo b > sub2/b $ hg -R sub2 ci -Am sub2 adding b $ echo 'sub2 = sub2' >> .hgsub $ fileset 'subrepo()' $ hg add .hgsub $ fileset 'subrepo()' sub sub2 $ fileset 'subrepo("sub")' sub $ fileset 'subrepo("glob:*")' sub sub2 $ hg ci -m subrepo Test that .hgsubstate is updated as appropriate during a conversion. The saverev property is enough to alter the hashes of the subrepo. $ hg init ../converted $ hg --config extensions.convert= convert --config convert.hg.saverev=True \ > sub ../converted/sub initializing destination ../converted/sub repository scanning source... sorting... converting... 0 sub $ hg clone -U sub2 ../converted/sub2 $ hg --config extensions.convert= convert --config convert.hg.saverev=True \ > . ../converted scanning source... sorting... converting... 4 addfiles 3 manychanges 2 diverging 1 merge 0 subrepo no ".hgsubstate" updates will be made for "sub2" $ hg up -q -R ../converted -r tip $ hg --cwd ../converted cat sub/suba sub2/b -r tip a b $ oldnode=`hg log -r tip -T "{node}\n"` $ newnode=`hg log -R ../converted -r tip -T "{node}\n"` $ [ "$oldnode" != "$newnode" ] || echo "nothing changed" Test with a revision $ hg log -G --template '{rev} {desc}\n' @ 4 subrepo | o 3 merge |\ | o 2 diverging | | o | 1 manychanges |/ o 0 addfiles $ echo unknown > unknown $ fileset -r1 'modified()' b2 $ fileset -r1 'added() and c1' c1 $ fileset -r1 'removed()' a2 $ fileset -r1 'deleted()' $ fileset -r1 'unknown()' $ fileset -r1 'ignored()' $ fileset -r1 'hgignore()' b2 bin $ fileset -r1 'binary()' bin $ fileset -r1 'size(1k)' 1k $ fileset -r3 'resolved()' $ fileset -r3 'unresolved()' #if execbit $ fileset -r1 'exec()' b2 #endif #if symlink $ fileset -r1 'symlink()' b2link #endif #if no-windows $ fileset -r1 'not portable()' con.xml $ hg forget 'con.xml' #endif $ fileset -r4 'subrepo("re:su.*")' sub sub2 $ fileset -r4 'subrepo("sub")' sub $ fileset -r4 'b2 or c1' b2 c1 >>> open('dos', 'wb').write("dos\r\n") >>> open('mixed', 'wb').write("dos\r\nunix\n") >>> open('mac', 'wb').write("mac\r") $ hg add dos mixed mac (remove a1, to examine safety of 'eol' on removed files) $ rm a1 $ fileset 'eol(dos)' dos mixed $ fileset 'eol(unix)' mixed .hgsub .hgsubstate b1 b2 c1 $ fileset 'eol(mac)' mac Test safety of 'encoding' on removed files $ fileset 'encoding("ascii")' dos mac mixed .hgsub .hgsubstate 1k 2k b1 b2 b2link (symlink !) bin c1 Test detection of unintentional 'matchctx.existing()' invocation $ cat > $TESTTMP/existingcaller.py <<EOF > from mercurial import registrar > > filesetpredicate = registrar.filesetpredicate() > @filesetpredicate('existingcaller()', callexisting=False) > def existingcaller(mctx, x): > # this 'mctx.existing()' invocation is unintentional > return [f for f in mctx.existing()] > EOF $ cat >> .hg/hgrc <<EOF > [extensions] > existingcaller = $TESTTMP/existingcaller.py > EOF $ fileset 'existingcaller()' 2>&1 | tail -1 AssertionError: unexpected existing() invocation Test 'revs(...)' ================ small reminder of the repository state $ hg log -G @ changeset: 4:* (glob) | tag: tip | user: test | date: Thu Jan 01 00:00:00 1970 +0000 | summary: subrepo | o changeset: 3:* (glob) |\ parent: 2:55b05bdebf36 | | parent: 1:* (glob) | | user: test | | date: Thu Jan 01 00:00:00 1970 +0000 | | summary: merge | | | o changeset: 2:55b05bdebf36 | | parent: 0:8a9576c51c1f | | user: test | | date: Thu Jan 01 00:00:00 1970 +0000 | | summary: diverging | | o | changeset: 1:* (glob) |/ user: test | date: Thu Jan 01 00:00:00 1970 +0000 | summary: manychanges | o changeset: 0:8a9576c51c1f user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: addfiles $ hg status --change 0 A a1 A a2 A b1 A b2 $ hg status --change 1 M b2 A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) R a2 $ hg status --change 2 M b2 $ hg status --change 3 M b2 A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) R a2 $ hg status --change 4 A .hgsub A .hgsubstate $ hg status A dos A mac A mixed R con.xml (no-windows !) ! a1 ? b2.orig ? c3 ? unknown Test files at -r0 should be filtered by files at wdir ----------------------------------------------------- $ fileset -r0 '* and revs("wdir()", *)' a1 b1 b2 Test that "revs()" work at all ------------------------------ $ fileset "revs('2', modified())" b2 Test that "revs()" work for file missing in the working copy/current context ---------------------------------------------------------------------------- (a2 not in working copy) $ fileset "revs('0', added())" a1 a2 b1 b2 (none of the file exist in "0") $ fileset -r 0 "revs('4', added())" .hgsub .hgsubstate Call with empty revset -------------------------- $ fileset "revs('2-2', modified())" Call with revset matching multiple revs --------------------------------------- $ fileset "revs('0+4', added())" a1 a2 b1 b2 .hgsub .hgsubstate overlapping set $ fileset "revs('1+2', modified())" b2 test 'status(...)' ================= Simple case ----------- $ fileset "status(3, 4, added())" .hgsub .hgsubstate use rev to restrict matched file ----------------------------------------- $ hg status --removed --rev 0 --rev 1 R a2 $ fileset "status(0, 1, removed())" a2 $ fileset "* and status(0, 1, removed())" $ fileset -r 4 "status(0, 1, removed())" a2 $ fileset -r 4 "* and status(0, 1, removed())" $ fileset "revs('4', * and status(0, 1, removed()))" $ fileset "revs('0', * and status(0, 1, removed()))" a2 check wdir() ------------ $ hg status --removed --rev 4 R con.xml (no-windows !) $ fileset "status(4, 'wdir()', removed())" con.xml (no-windows !) $ hg status --removed --rev 2 R a2 $ fileset "status('2', 'wdir()', removed())" a2 test backward status -------------------- $ hg status --removed --rev 0 --rev 4 R a2 $ hg status --added --rev 4 --rev 0 A a2 $ fileset "status(4, 0, added())" a2 test cross branch status ------------------------ $ hg status --added --rev 1 --rev 2 A a2 $ fileset "status(1, 2, added())" a2 test with multi revs revset --------------------------- $ hg status --added --rev 0:1 --rev 3:4 A .hgsub A .hgsubstate A 1k A 2k A b2link (no-windows !) A bin A c1 A con.xml (no-windows !) $ fileset "status('0:1', '3:4', added())" .hgsub .hgsubstate 1k 2k b2link (no-windows !) bin c1 con.xml (no-windows !) tests with empty value ---------------------- Fully empty revset $ fileset "status('', '4', added())" hg: parse error: first argument to status must be a revision [255] $ fileset "status('2', '', added())" hg: parse error: second argument to status must be a revision [255] Empty revset will error at the revset layer $ fileset "status(' ', '4', added())" hg: parse error at 1: not a prefix: end [255] $ fileset "status('2', ' ', added())" hg: parse error at 1: not a prefix: end [255]