view tests/test-flagprocessor.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# Create server
  $ hg init server
  $ cd server
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF
  $ cd ../

# Clone server and enable extensions
  $ hg clone -q server client
  $ cd client
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Commit file that will trigger the noop extension
  $ echo '[NOOP]' > noop
  $ hg commit -Aqm "noop"

# Commit file that will trigger the base64 extension
  $ echo '[BASE64]' > base64
  $ hg commit -Aqm 'base64'

# Commit file that will trigger the gzip extension
  $ echo '[GZIP]' > gzip
  $ hg commit -Aqm 'gzip'

# Commit file that will trigger noop and base64
  $ echo '[NOOP][BASE64]' > noop-base64
  $ hg commit -Aqm 'noop+base64'

# Commit file that will trigger noop and gzip
  $ echo '[NOOP][GZIP]' > noop-gzip
  $ hg commit -Aqm 'noop+gzip'

# Commit file that will trigger base64 and gzip
  $ echo '[BASE64][GZIP]' > base64-gzip
  $ hg commit -Aqm 'base64+gzip'

# Commit file that will trigger base64, gzip and noop
  $ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
  $ hg commit -Aqm 'base64+gzip+noop'

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# Push to the server
  $ hg push
  pushing to $TESTTMP/server (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files

# Initialize new client (not cloning) and setup extension
  $ cd ..
  $ hg init client2
  $ cd client2
  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default = $TESTTMP/server
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > EOF

# Pull from server and update to latest revision
  $ hg pull default
  pulling from $TESTTMP/server (glob)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 7 changesets with 7 changes to 7 files
  (run 'hg update' to get a working copy)
  $ hg update
  7 files updated, 0 files merged, 0 files removed, 0 files unresolved

# TEST: ensure the revision data is consistent
  $ hg cat noop
  [NOOP]
  $ hg debugdata noop 0
  [NOOP]

  $ hg cat -r . base64
  [BASE64]
  $ hg debugdata base64 0
  W0JBU0U2NF0K (no-eol)

  $ hg cat -r . gzip
  [GZIP]
  $ hg debugdata gzip 0
  x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)

  $ hg cat -r . noop-base64
  [NOOP][BASE64]
  $ hg debugdata noop-base64 0
  W05PT1BdW0JBU0U2NF0K (no-eol)

  $ hg cat -r . noop-gzip
  [NOOP][GZIP]
  $ hg debugdata noop-gzip 0
  x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)

  $ hg cat -r . base64-gzip
  [BASE64][GZIP]
  $ hg debugdata base64-gzip 0
  eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)

  $ hg cat -r . base64-gzip-noop
  [BASE64][GZIP][NOOP]
  $ hg debugdata base64-gzip-noop 0
  eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)

# TEST: ensure a missing processor is handled
  $ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
  $ hg commit -Aqm 'fail+base64+gzip+noop'
  abort: missing processor for flag '0x1'!
  [255]

# TEST: ensure we cannot register several flag processors on the same flag
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > extension=$TESTDIR/flagprocessorext.py
  > duplicate=$TESTDIR/flagprocessorext.py
  > EOF
  $ echo 'this should fail' > file
  $ hg commit -Aqm 'add file'
  abort: cannot register multiple processors on flag '0x8'.
  [255]

  $ cd ..

# TEST: bundle repo
  $ hg init bundletest
  $ cd bundletest

  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > flagprocessor=$TESTDIR/flagprocessorext.py
  > EOF

  $ for i in 0 single two three 4; do
  >   echo '[BASE64]a-bit-longer-'$i > base64
  >   hg commit -m base64-$i -A base64
  > done

  $ hg update 2 -q
  $ echo '[BASE64]a-bit-longer-branching' > base64
  $ hg commit -q -m branching

  $ hg bundle --base 1 bundle.hg
  4 changesets found
  $ hg --config extensions.strip= strip -r 2 --no-backup --force -q
  $ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  

  $ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
  $ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
  5 branching
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  4 base64-4
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  3 base64-three
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  2 base64-two
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  1 base64-single
   base64 |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)
  
  0 base64-0
   base64 |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  
  $ rm bundle.hg bundle-again.hg

# TEST: hg status

  $ hg status
  $ hg diff