view tests/test-http-bad-server.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

#require killdaemons serve zstd

Client version is embedded in HTTP request and is effectively dynamic. Pin the
version so behavior is deterministic.

  $ cat > fakeversion.py << EOF
  > from mercurial import util
  > util.version = lambda: '4.2'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeversion = `pwd`/fakeversion.py
  > EOF

  $ hg init server0
  $ cd server0
  $ touch foo
  $ hg -q commit -A -m initial

Also disable compression because zstd is optional and causes output to vary
and because debugging partial responses is hard when compression is involved

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > badserver = $TESTDIR/badserverext.py
  > [server]
  > compressionengines = none
  > EOF

Failure to accept() socket should result in connection related error message

  $ hg --config badserver.closebeforeaccept=true serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: Connection reset by peer (no-windows !)
  abort: error: An existing connection was forcibly closed by the remote host (windows !)
  [255]

(The server exits on its own, but there is a race between that and starting a new server.
So ensure the process is dead.)

  $ killdaemons.py $DAEMON_PIDS

Failure immediately after accept() should yield connection related error message

  $ hg --config badserver.closeafteraccept=true serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

TODO: this usually outputs good results, but sometimes emits abort:
error: '' on FreeBSD and OS X.
What we ideally want are:

abort: error: Connection reset by peer (no-windows !)
abort: error: An existing connection was forcibly closed by the remote host (windows !)

The flakiness in this output was observable easily with
--runs-per-test=20 on macOS 10.12 during the freeze for 4.2.
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: * (glob)
  [255]

  $ killdaemons.py $DAEMON_PIDS

Failure to read all bytes in initial HTTP request should yield connection related error message

  $ hg --config badserver.closeafterrecvbytes=1 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this error message is not very good

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(1 from 65537) -> (1) G
  read limit reached; closing socket

  $ rm -f error.log

Same failure, but server reads full HTTP request line

  $ hg --config badserver.closeafterrecvbytes=40 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(40 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(7 from -1) -> (7) Accept-
  read limit reached; closing socket

  $ rm -f error.log

Failure on subsequent HTTP request on the same socket (cmd?batch)

  $ hg --config badserver.closeafterrecvbytes=210 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(210 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(177 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(150 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(115 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(9? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(4? from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 405\r\n
  write(2) -> \r\n
  write(405) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(4? from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n (glob)
  readline(1? from -1) -> (1?) Accept-Encoding* (glob)
  read limit reached; closing socket
  readline(210 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(184 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(157 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(128 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(87 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(39 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(4 from -1) -> (4) host
  read limit reached; closing socket

  $ rm -f error.log

Failure to read getbundle HTTP request

  $ hg --config badserver.closeafterrecvbytes=292 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: error: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(292 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(259 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(232 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(197 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(17? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(12? from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 405\r\n
  write(2) -> \r\n
  write(405) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline\(12[34] from 65537\) -> \(2[67]\) GET /\?cmd=batch HTTP/1.1\\r\\n (re)
  readline(9? from -1) -> (27) Accept-Encoding: identity\r\n (glob)
  readline(7? from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n (glob)
  readline(4? from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n (glob)
  readline(1 from -1) -> (1) x (?)
  read limit reached; closing socket
  readline(292 from 65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(266 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(239 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(210 from -1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(169 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(121 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(86 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(6? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(1? from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(20) -> Content-Length: 42\r\n
  write(2) -> \r\n
  write(42) -> 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline\(1[23] from 65537\) -> \(1[23]\) GET /\?cmd=ge.? (re)
  read limit reached; closing socket
  readline(292 from 65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(262 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(235 from -1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(206 from -1) -> (206) x-hgarg-1: bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Ali
  read limit reached; closing socket

  $ rm -f error.log

Now do a variation using POST to send arguments

  $ hg --config experimental.httppostargs=true --config badserver.closeafterrecvbytes=315 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: ''
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(315 from 65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(282 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(255 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(220 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(19? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(14? from -1) -> (2) \r\n (glob)
  write(36) -> HTTP/1.1 200 Script output follows\r\n
  write(23) -> Server: badhttpserver\r\n
  write(37) -> Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41) -> Content-Type: application/mercurial-0.1\r\n
  write(21) -> Content-Length: 418\r\n
  write(2) -> \r\n
  write(418) -> lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httppostargs httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline\(14[67] from 65537\) -> \(2[67]\) POST /\?cmd=batch HTTP/1.1\\r\\n (re)
  readline\(1(19|20) from -1\) -> \(27\) Accept-Encoding: identity\\r\\n (re)
  readline(9? from -1) -> (41) content-type: application/mercurial-0.1\r\n (glob)
  readline(5? from -1) -> (19) vary: X-HgProto-1\r\n (glob)
  readline(3? from -1) -> (19) x-hgargs-post: 28\r\n (glob)
  readline(1? from -1) -> (1?) x-hgproto-1: * (glob)
  read limit reached; closing socket
  readline(315 from 65537) -> (27) POST /?cmd=batch HTTP/1.1\r\n
  readline(288 from -1) -> (27) Accept-Encoding: identity\r\n
  readline(261 from -1) -> (41) content-type: application/mercurial-0.1\r\n
  readline(220 from -1) -> (19) vary: X-HgProto-1\r\n
  readline(201 from -1) -> (19) x-hgargs-post: 28\r\n
  readline(182 from -1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(134 from -1) -> (35) accept: application/mercurial-0.1\r\n
  readline(99 from -1) -> (20) content-length: 28\r\n
  readline(79 from -1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(5? from -1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n (glob)
  readline(? from -1) -> (2) \r\n (glob)
  read(? from 28) -> (?) cmds=* (glob)
  read limit reached, closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Now move on to partial server responses

Server sends a single character from the HTTP response line

  $ hg --config badserver.closeaftersendbytes=1 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: error: H
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(1 from 36) -> (0) H
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete capabilities response body

  $ hg --config badserver.closeaftersendbytes=180 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  abort: HTTP request error (incomplete response; expected 385 bytes got 20)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (144) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (121) Server: badhttpserver\r\n
  write(37 from 37) -> (84) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (43) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (22) Content-Length: 405\r\n
  write(2 from 2) -> (20) \r\n
  write(20 from 405) -> (0) lookup changegroupsu
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for batch request

  $ hg --config badserver.closeaftersendbytes=695 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is horrible

  $ hg clone http://localhost:$HGPORT/ clone
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (application/mercuria)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (659) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (636) Server: badhttpserver\r\n
  write(37 from 37) -> (599) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (558) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (537) Content-Length: 405\r\n
  write(2 from 2) -> (535) \r\n
  write(405 from 405) -> (130) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (94) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (71) Server: badhttpserver\r\n
  write(37 from 37) -> (34) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(34 from 41) -> (0) Content-Type: application/mercuria
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends an incomplete HTTP response body to batch request

  $ hg --config badserver.closeaftersendbytes=760 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO client spews a stack due to uncaught ValueError in batch.results()
  $ hg clone http://localhost:$HGPORT/ clone 2> /dev/null
  [1]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (724) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (701) Server: badhttpserver\r\n
  write(37 from 37) -> (664) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (623) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (602) Content-Length: 405\r\n
  write(2 from 2) -> (600) \r\n
  write(405 from 405) -> (195) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (159) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (136) Server: badhttpserver\r\n
  write(37 from 37) -> (99) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (58) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (38) Content-Length: 42\r\n
  write(2 from 2) -> (36) \r\n
  write(36 from 42) -> (0) 96ee1d7354c4ad7372047672c36a1f561e3a
  write limit reached; closing socket

  $ rm -f error.log

Server sends incomplete headers for getbundle response

  $ hg --config badserver.closeaftersendbytes=895 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

TODO this output is terrible

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: 'http://localhost:$HGPORT/' does not appear to be an hg repository:
  ---%<--- (application/mercuri)
  
  ---%<---
  !
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (859) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (836) Server: badhttpserver\r\n
  write(37 from 37) -> (799) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (758) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (737) Content-Length: 405\r\n
  write(2 from 2) -> (735) \r\n
  write(405 from 405) -> (330) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (294) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (271) Server: badhttpserver\r\n
  write(37 from 37) -> (234) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (193) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (173) Content-Length: 42\r\n
  write(2 from 2) -> (171) \r\n
  write(42 from 42) -> (129) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (396) x-hgarg-1: bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (93) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (70) Server: badhttpserver\r\n
  write(37 from 37) -> (33) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(33 from 41) -> (0) Content-Type: application/mercuri
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends empty HTTP body for getbundle

  $ hg --config badserver.closeaftersendbytes=933 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (897) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (874) Server: badhttpserver\r\n
  write(37 from 37) -> (837) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (796) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (775) Content-Length: 405\r\n
  write(2 from 2) -> (773) \r\n
  write(405 from 405) -> (368) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (332) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (309) Server: badhttpserver\r\n
  write(37 from 37) -> (272) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (231) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (211) Content-Length: 42\r\n
  write(2 from 2) -> (209) \r\n
  write(42 from 42) -> (167) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (396) x-hgarg-1: bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (131) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (108) Server: badhttpserver\r\n
  write(37 from 37) -> (71) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (30) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (2) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (0) \r\n
  write limit reached; closing socket
  write(36) -> HTTP/1.1 500 Internal Server Error\r\n

  $ rm -f error.log

Server sends partial compression string

  $ hg --config badserver.closeaftersendbytes=945 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 1 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ cat error.log
  readline(65537) -> (33) GET /?cmd=capabilities HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (909) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (886) Server: badhttpserver\r\n
  write(37 from 37) -> (849) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (808) Content-Type: application/mercurial-0.1\r\n
  write(21 from 21) -> (787) Content-Length: 405\r\n
  write(2 from 2) -> (785) \r\n
  write(405 from 405) -> (380) lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=none
  readline(65537) -> (26) GET /?cmd=batch HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (41) x-hgarg-1: cmds=heads+%3Bknown+nodes%3D\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (344) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (321) Server: badhttpserver\r\n
  write(37 from 37) -> (284) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (243) Content-Type: application/mercurial-0.1\r\n
  write(20 from 20) -> (223) Content-Length: 42\r\n
  write(2 from 2) -> (221) \r\n
  write(42 from 42) -> (179) 96ee1d7354c4ad7372047672c36a1f561e3a6a4c\n;
  readline(65537) -> (30) GET /?cmd=getbundle HTTP/1.1\r\n
  readline(-1) -> (27) Accept-Encoding: identity\r\n
  readline(-1) -> (29) vary: X-HgArg-1,X-HgProto-1\r\n
  readline(-1) -> (396) x-hgarg-1: bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=96ee1d7354c4ad7372047672c36a1f561e3a6a4c&listkeys=phases%2Cbookmarks\r\n
  readline(-1) -> (48) x-hgproto-1: 0.1 0.2 comp=zstd,zlib,none,bzip2\r\n
  readline(-1) -> (35) accept: application/mercurial-0.1\r\n
  readline(-1) -> (2?) host: localhost:$HGPORT\r\n (glob)
  readline(-1) -> (49) user-agent: mercurial/proto-1.0 (Mercurial 4.2)\r\n
  readline(-1) -> (2) \r\n
  write(36 from 36) -> (143) HTTP/1.1 200 Script output follows\r\n
  write(23 from 23) -> (120) Server: badhttpserver\r\n
  write(37 from 37) -> (83) Date: Fri, 14 Apr 2017 00:00:00 GMT\r\n
  write(41 from 41) -> (42) Content-Type: application/mercurial-0.2\r\n
  write(28 from 28) -> (14) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (12) \r\n
  write(6 from 6) -> (6) 1\\r\\n\x04\\r\\n (esc)
  write(6 from 9) -> (0) 4\r\nnon
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends partial bundle2 header magic

  $ hg --config badserver.closeaftersendbytes=954 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 1 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -7 error.log
  write(28 from 28) -> (23) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (21) \r\n
  write(6 from 6) -> (15) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (6) 4\r\nnone\r\n
  write(6 from 9) -> (0) 4\r\nHG2
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server sends incomplete bundle2 stream params length

  $ hg --config badserver.closeaftersendbytes=963 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response; expected 1 bytes got 3)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (32) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (30) \r\n
  write(6 from 6) -> (24) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (15) 4\r\nnone\r\n
  write(9 from 9) -> (6) 4\r\nHG20\r\n
  write(6 from 9) -> (0) 4\\r\\n\x00\x00\x00 (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Servers stops after bundle2 stream params header

  $ hg --config badserver.closeaftersendbytes=966 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -8 error.log
  write(28 from 28) -> (35) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (33) \r\n
  write(6 from 6) -> (27) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (18) 4\r\nnone\r\n
  write(9 from 9) -> (9) 4\r\nHG20\r\n
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header length

  $ hg --config badserver.closeaftersendbytes=975 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -9 error.log
  write(28 from 28) -> (44) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (42) \r\n
  write(6 from 6) -> (36) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (27) 4\r\nnone\r\n
  write(9 from 9) -> (18) 4\r\nHG20\r\n
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after bundle2 part header

  $ hg --config badserver.closeaftersendbytes=1022 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -10 error.log
  write(28 from 28) -> (91) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (89) \r\n
  write(6 from 6) -> (83) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (74) 4\r\nnone\r\n
  write(9 from 9) -> (65) 4\r\nHG20\r\n
  write(9 from 9) -> (56) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (47) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (0) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops after bundle2 part payload chunk size

  $ hg --config badserver.closeaftersendbytes=1031 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -11 error.log
  write(28 from 28) -> (100) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (98) \r\n
  write(6 from 6) -> (92) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (83) 4\r\nnone\r\n
  write(9 from 9) -> (74) 4\r\nHG20\r\n
  write(9 from 9) -> (65) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (56) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (9) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending in middle of bundle2 payload chunk

  $ hg --config badserver.closeaftersendbytes=1504 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -12 error.log
  write(28 from 28) -> (573) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (571) \r\n
  write(6 from 6) -> (565) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (556) 4\r\nnone\r\n
  write(9 from 9) -> (547) 4\r\nHG20\r\n
  write(9 from 9) -> (538) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (529) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (482) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (473) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (0) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 length payload chunk size

  $ hg --config badserver.closeaftersendbytes=1513 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  transaction abort!
  rollback completed
  abort: HTTP request error (incomplete response)
  (this may be an intermittent network failure; if the error persists, consider contacting the network or server operator)
  [255]

  $ killdaemons.py $DAEMON_PIDS

  $ tail -13 error.log
  write(28 from 28) -> (582) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (580) \r\n
  write(6 from 6) -> (574) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (565) 4\r\nnone\r\n
  write(9 from 9) -> (556) 4\r\nHG20\r\n
  write(9 from 9) -> (547) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (538) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (491) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (482) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (9) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log

Server stops sending after 0 part bundle part header (indicating end of bundle2 payload)
This is before the 0 size chunked transfer part that signals end of HTTP response.

  $ hg --config badserver.closeaftersendbytes=1710 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -22 error.log
  write(28 from 28) -> (779) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (777) \r\n
  write(6 from 6) -> (771) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (762) 4\r\nnone\r\n
  write(9 from 9) -> (753) 4\r\nHG20\r\n
  write(9 from 9) -> (744) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (735) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (688) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (679) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (206) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (197) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (188) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (150) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (141) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (77) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (68) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (59) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (18) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (9) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (0) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone

Server sends a size 0 chunked-transfer size without terminating \r\n

  $ hg --config badserver.closeaftersendbytes=1713 serve -p $HGPORT -d --pid-file=hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT/ clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py $DAEMON_PIDS

  $ tail -23 error.log
  write(28 from 28) -> (782) Transfer-Encoding: chunked\r\n
  write(2 from 2) -> (780) \r\n
  write(6 from 6) -> (774) 1\\r\\n\x04\\r\\n (esc)
  write(9 from 9) -> (765) 4\r\nnone\r\n
  write(9 from 9) -> (756) 4\r\nHG20\r\n
  write(9 from 9) -> (747) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (738) 4\\r\\n\x00\x00\x00)\\r\\n (esc)
  write(47 from 47) -> (691) 29\\r\\n\x0bCHANGEGROUP\x00\x00\x00\x00\x01\x01\x07\x02	\x01version02nbchanges1\\r\\n (esc)
  write(9 from 9) -> (682) 4\\r\\n\x00\x00\x01\xd2\\r\\n (esc)
  write(473 from 473) -> (209) 1d2\\r\\n\x00\x00\x00\xb2\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00>6a3df4de388f3c4f8e28f4f9a814299a3cbb5f50\\ntest\\n0 0\\nfoo\\n\\ninitial\x00\x00\x00\x00\x00\x00\x00\xa1j=\xf4\xde8\x8f<O\x8e(\xf4\xf9\xa8\x14)\x9a<\xbb_P\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00-foo\x00b80de5d138758541c5f05265ad144ab9fa86d1db\\n\x00\x00\x00\x00\x00\x00\x00\x07foo\x00\x00\x00h\xb8\\r\xe5\xd18u\x85A\xc5\xf0Re\xad\x14J\xb9\xfa\x86\xd1\xdb\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x96\xee\x1dsT\xc4\xadsr\x04vr\xc3j\x1fV\x1e:jL\x00\x00\x00\x00\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (200) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (191) 4\\r\\n\x00\x00\x00 \\r\\n (esc)
  write(38 from 38) -> (153) 20\\r\\n\x08LISTKEYS\x00\x00\x00\x01\x01\x00	\x06namespacephases\\r\\n (esc)
  write(9 from 9) -> (144) 4\\r\\n\x00\x00\x00:\\r\\n (esc)
  write(64 from 64) -> (80) 3a\r\n96ee1d7354c4ad7372047672c36a1f561e3a6a4c	1\npublishing	True\r\n
  write(9 from 9) -> (71) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (62) 4\\r\\n\x00\x00\x00#\\r\\n (esc)
  write(41 from 41) -> (21) 23\\r\\n\x08LISTKEYS\x00\x00\x00\x02\x01\x00		namespacebookmarks\\r\\n (esc)
  write(9 from 9) -> (12) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(9 from 9) -> (3) 4\\r\\n\x00\x00\x00\x00\\r\\n (esc)
  write(3 from 5) -> (0) 0\r\n
  write limit reached; closing socket
  write(27) -> 15\r\nInternal Server Error\r\n

  $ rm -f error.log
  $ rm -rf clone