revlog: skeleton support for version 2 revlogs
There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.
It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.
This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.
An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.
To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.
Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.
There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.
#require killdaemons serve
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
$ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at 'localhost:$HGPORT1': * (glob)
[255]
#else
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at 'localhost:$HGPORT1': Address already in use
[255]
#endif
$ cd ..
$ cat hg1.pid hg2.pid >> $DAEMON_PIDS
clone via stream
$ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
streaming all changes
6 files to transfer, 606 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
try to clone via stream, should use pull instead
$ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
warning: stream clone requested but server has them disabled
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
try to clone via stream but missing requirements, so should use pull instead
$ cat > $TESTTMP/removesupportedformat.py << EOF
> from mercurial import localrepo
> def extsetup(ui):
> localrepo.localrepository.supportedformats.remove('generaldelta')
> EOF
$ hg clone --config extensions.rsf=$TESTTMP/removesupportedformat.py --uncompressed http://localhost:$HGPORT/ copy3
warning: stream clone requested but client is missing requirements: generaldelta
(see https://www.mercurial-scm.org/wiki/MissingRequirement for more information)
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
clone via pull
$ hg clone http://localhost:$HGPORT1/ copy-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
clone over http with --update
$ hg clone http://localhost:$HGPORT1/ updated --update 0
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -r . -R updated
changeset: 0:8b6053c928fe
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 1
$ rm -rf updated
incoming via HTTP
$ hg clone http://localhost:$HGPORT1/ --rev 0 partial
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ touch LOCAL
$ hg ci -qAm LOCAL
$ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
comparing with http://localhost:$HGPORT1/
searching for changes
2
$ cd ..
pull
$ cd copy-pull
$ cat >> .hg/hgrc <<EOF
> [hooks]
> changegroup = sh -c "printenv.py changegroup"
> EOF
$ hg pull
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT1/
(run 'hg update' to get a working copy)
$ cd ..
clone from invalid URL
$ hg clone http://localhost:$HGPORT/bad
abort: HTTP Error 404: Not Found
[255]
test http authentication
+ use the same server to test server side streaming preference
$ cd test
$ cat << EOT > userpass.py
> import base64
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> auth = req.env.get('HTTP_AUTHORIZATION')
> if not auth:
> raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
> [('WWW-Authenticate', 'Basic Realm="mercurial"')])
> if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
> raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOT
$ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
> --config server.preferuncompressed=True \
> --config web.push_ssl=False --config web.allow_push=* -A ../access.log
$ cat pid >> $DAEMON_PIDS
$ cat << EOF > get_pass.py
> import getpass
> def newgetpass(arg):
> return "pass"
> getpass.getpass = newgetpass
> EOF
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
http authorization required for http://localhost:$HGPORT2/
realm: mercurial
user: user
password: 5fed3813f7f5
$ hg id http://user:pass@localhost:$HGPORT2/
5fed3813f7f5
$ echo '[auth]' >> .hg/hgrc
$ echo 'l.schemes=http' >> .hg/hgrc
$ echo 'l.prefix=lo' >> .hg/hgrc
$ echo 'l.username=user' >> .hg/hgrc
$ echo 'l.password=pass' >> .hg/hgrc
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://user@localhost:$HGPORT2/
5fed3813f7f5
$ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
streaming all changes
7 files to transfer, 916 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
searching for changes
no changes found
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
--pull should override server's preferuncompressed
$ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id http://user2@localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://user:pass2@localhost:$HGPORT2/
abort: HTTP Error 403: no
[255]
$ hg -R dest tag -r tip top
$ hg -R dest push http://user:pass@localhost:$HGPORT2/
pushing to http://user:***@localhost:$HGPORT2/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg rollback -q
$ sed 's/.*] "/"/' < ../access.log
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=getbundle HTTP/1.1" 401 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phases%2Cbookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
$ cd ..
clone of serve with repo in root and unserved subrepo (issue2970)
$ hg --cwd test init sub
$ echo empty > test/sub/empty
$ hg --cwd test/sub add empty
$ hg --cwd test/sub commit -qm 'add empty'
$ hg --cwd test/sub tag -r 0 something
$ echo sub = sub > test/.hgsub
$ hg --cwd test add .hgsub
$ hg --cwd test commit -qm 'add subrepo'
$ hg clone http://localhost:$HGPORT noslash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
$ hg clone http://localhost:$HGPORT/ slash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
check error log
$ cat error.log
check abort error reporting while pulling/cloning
$ $RUNTESTDIR/killdaemons.py
$ hg -R test serve -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py
$ cat hg3.pid >> $DAEMON_PIDS
$ hg clone http://localhost:$HGPORT/ abort-clone
requesting all changes
remote: abort: this is an exercise
abort: pull failed on remote
[255]
$ cat error.log
disable pull-based clones
$ hg -R test serve -p $HGPORT1 -d --pid-file=hg4.pid -E error.log --config server.disablefullbundle=True
$ cat hg4.pid >> $DAEMON_PIDS
$ hg clone http://localhost:$HGPORT1/ disable-pull-clone
requesting all changes
remote: abort: server has pull-based clones disabled
abort: pull failed on remote
(remove --pull if specified or upgrade Mercurial)
[255]
... but keep stream clones working
$ hg clone --uncompressed --noupdate http://localhost:$HGPORT1/ test-stream-clone
streaming all changes
* files to transfer, * of data (glob)
transferred * in * seconds (*/sec) (glob)
searching for changes
no changes found
$ cat error.log
... and also keep partial clones and pulls working
$ hg clone http://localhost:$HGPORT1 --rev 0 test-partial-clone
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg pull -R test-partial-clone
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 3 changes to 3 files
(run 'hg update' to get a working copy)
corrupt cookies file should yield a warning
$ cat > $TESTTMP/cookies.txt << EOF
> bad format
> EOF
$ hg --config auth.cookiefile=$TESTTMP/cookies.txt id http://localhost:$HGPORT/
(error loading cookie file $TESTTMP/cookies.txt: '*/cookies.txt' does not look like a Netscape format cookies file; continuing without cookies) (glob)
56f9bc90cce6
$ killdaemons.py
Create dummy authentication handler that looks for cookies. It doesn't do anything
useful. It just raises an HTTP 500 with details about the Cookie request header.
We raise HTTP 500 because its message is printed in the abort message.
$ cat > cookieauth.py << EOF
> from mercurial import util
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> cookie = req.env.get('HTTP_COOKIE')
> if not cookie:
> raise common.ErrorResponse(common.HTTP_SERVER_ERROR, 'no-cookie')
> raise common.ErrorResponse(common.HTTP_SERVER_ERROR, 'Cookie: %s' % cookie)
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOF
$ hg serve --config extensions.cookieauth=cookieauth.py -R test -p $HGPORT -d --pid-file=pid
$ cat pid > $DAEMON_PIDS
Request without cookie sent should fail due to lack of cookie
$ hg id http://localhost:$HGPORT
abort: HTTP Error 500: no-cookie
[255]
Populate a cookies file
$ cat > cookies.txt << EOF
> # HTTP Cookie File
> # Expiration is 2030-01-01 at midnight
> .example.com TRUE / FALSE 1893456000 hgkey examplevalue
> EOF
Should not send a cookie for another domain
$ hg --config auth.cookiefile=cookies.txt id http://localhost:$HGPORT/
abort: HTTP Error 500: no-cookie
[255]
Add a cookie entry for our test server and verify it is sent
$ cat >> cookies.txt << EOF
> localhost.local FALSE / FALSE 1893456000 hgkey localhostvalue
> EOF
$ hg --config auth.cookiefile=cookies.txt id http://localhost:$HGPORT/
abort: HTTP Error 500: Cookie: hgkey=localhostvalue
[255]