view tests/test-obsolete-changeset-exchange.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

Test changesets filtering during exchanges (some tests are still in
test-obsolete.t)

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution=createmarkers
  > EOF

Push does not corrupt remote
----------------------------

Create a DAG where a changeset reuses a revision from a file first used in an
extinct changeset.

  $ hg init local
  $ cd local
  $ echo 'base' > base
  $ hg commit -Am base
  adding base
  $ echo 'A' > A
  $ hg commit -Am A
  adding A
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg revert -ar 1
  adding A
  $ hg commit -Am "A'"
  created new head
  $ hg log -G --template='{desc} {node}'
  @  A' f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  |
  | o  A 9d73aac1b2ed7d53835eaeec212ed41ea47da53a
  |/
  o  base d20a80d4def38df63a4b330b7fb688f3d4cae1e3
  
  $ hg debugobsolete 9d73aac1b2ed7d53835eaeec212ed41ea47da53a f89bcc95eba5174b1ccc3e33a82e84c96e8338ee

Push it. The bundle should not refer to the extinct changeset.

  $ hg init ../other
  $ hg push ../other
  pushing to ../other
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  $ hg -R ../other verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

Adding a changeset going extinct locally
------------------------------------------

Pull a changeset that will immediatly goes extinct (because you already have a
marker to obsolete him)
(test resolution of issue3788)

  $ hg phase --draft --force f89bcc95eba5
  $ hg phase -R ../other --draft --force f89bcc95eba5
  $ hg commit --amend -m "A''"
  $ hg --hidden --config extensions.mq= strip  --no-backup f89bcc95eba5
  $ hg pull ../other
  pulling from ../other
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

check that bundle is not affected

  $ hg bundle --hidden --rev f89bcc95eba5 --base "f89bcc95eba5^" ../f89bcc95eba5.hg
  1 changesets found
  $ hg --hidden --config extensions.mq= strip --no-backup f89bcc95eba5
  $ hg unbundle ../f89bcc95eba5.hg
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)

check-that bundle can contain markers:

  $ hg bundle --hidden --rev f89bcc95eba5 --base "f89bcc95eba5^" ../f89bcc95eba5-obs.hg --config experimental.evolution.bundle-obsmarker=1
  1 changesets found
  $ hg debugbundle ../f89bcc95eba5.hg
  Stream params: sortdict([('Compression', 'BZ')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  $ hg debugbundle ../f89bcc95eba5-obs.hg
  Stream params: sortdict([('Compression', 'BZ')])
  changegroup -- "sortdict([('version', '02'), ('nbchanges', '1')])"
      f89bcc95eba5174b1ccc3e33a82e84c96e8338ee
  obsmarkers -- 'sortdict()'
      version: 1 (70 bytes)
      9d73aac1b2ed7d53835eaeec212ed41ea47da53a f89bcc95eba5174b1ccc3e33a82e84c96e8338ee 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

  $ cd ..

pull does not fetch excessive changesets when common node is hidden (issue4982)
-------------------------------------------------------------------------------

initial repo with server and client matching

  $ hg init pull-hidden-common
  $ cd pull-hidden-common
  $ touch foo
  $ hg -q commit -A -m initial
  $ echo 1 > foo
  $ hg commit -m 1
  $ echo 2a > foo
  $ hg commit -m 2a
  $ cd ..
  $ hg clone --pull pull-hidden-common pull-hidden-common-client
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

server obsoletes the old head

  $ cd pull-hidden-common
  $ hg -q up -r 1
  $ echo 2b > foo
  $ hg -q commit -m 2b
  $ hg debugobsolete 6a29ed9c68defff1a139e5c6fa9696fb1a75783d bec0734cd68e84477ba7fc1d13e6cff53ab70129
  $ cd ..

client only pulls down 1 changeset

  $ cd pull-hidden-common-client
  $ hg pull --debug
  pulling from $TESTTMP/pull-hidden-common (glob)
  query 1; heads
  searching for changes
  taking quick initial sample
  query 2; still undecided: 2, sample size is: 2
  2 total queries
  1 changesets found
  list of changesets:
  bec0734cd68e84477ba7fc1d13e6cff53ab70129
  listing keys for "phases"
  listing keys for "bookmarks"
  bundle2-output-bundle: "HG20", 3 parts total
  bundle2-output-part: "changegroup" (params: 1 mandatory 1 advisory) streamed payload
  bundle2-output-part: "listkeys" (params: 1 mandatory) 58 bytes payload
  bundle2-output-part: "listkeys" (params: 1 mandatory) empty payload
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
  adding changesets
  add changeset bec0734cd68e
  adding manifests
  adding file changes
  adding foo revisions
  added 1 changesets with 1 changes to 1 files (+1 heads)
  bundle2-input-part: total payload size 476
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: total payload size 58
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-bundle: 2 parts total
  checking for updated bookmarks
  updating the branch cache
  (run 'hg heads' to see heads, 'hg merge' to merge)