view tests/test-pathencode.py @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

# This is a randomized test that generates different pathnames every
# time it is invoked, and tests the encoding of those pathnames.
#
# It uses a simple probabilistic model to generate valid pathnames
# that have proven likely to expose bugs and divergent behavior in
# different encoding implementations.

from __future__ import absolute_import, print_function

import binascii
import collections
import itertools
import math
import os
import random
import sys
import time
from mercurial import (
    store,
)

validchars = set(map(chr, range(0, 256)))
alphanum = range(ord('A'), ord('Z'))

for c in '\0/':
    validchars.remove(c)

winreserved = ('aux con prn nul'.split() +
               ['com%d' % i for i in xrange(1, 10)] +
               ['lpt%d' % i for i in xrange(1, 10)])

def casecombinations(names):
    '''Build all case-diddled combinations of names.'''

    combos = set()

    for r in names:
        for i in xrange(len(r) + 1):
            for c in itertools.combinations(xrange(len(r)), i):
                d = r
                for j in c:
                    d = ''.join((d[:j], d[j].upper(), d[j + 1:]))
                combos.add(d)
    return sorted(combos)

def buildprobtable(fp, cmd='hg manifest tip'):
    '''Construct and print a table of probabilities for path name
    components.  The numbers are percentages.'''

    counts = collections.defaultdict(lambda: 0)
    for line in os.popen(cmd).read().splitlines():
        if line[-2:] in ('.i', '.d'):
            line = line[:-2]
        if line.startswith('data/'):
            line = line[5:]
        for c in line:
            counts[c] += 1
    for c in '\r/\n':
        counts.pop(c, None)
    t = sum(counts.itervalues()) / 100.0
    fp.write('probtable = (')
    for i, (k, v) in enumerate(sorted(counts.iteritems(), key=lambda x: x[1],
                                      reverse=True)):
        if (i % 5) == 0:
            fp.write('\n    ')
        vt = v / t
        if vt < 0.0005:
            break
        fp.write('(%r, %.03f), ' % (k, vt))
    fp.write('\n    )\n')

# A table of character frequencies (as percentages), gleaned by
# looking at filelog names from a real-world, very large repo.

probtable = (
    ('t', 9.828), ('e', 9.042), ('s', 8.011), ('a', 6.801), ('i', 6.618),
    ('g', 5.053), ('r', 5.030), ('o', 4.887), ('p', 4.363), ('n', 4.258),
    ('l', 3.830), ('h', 3.693), ('_', 3.659), ('.', 3.377), ('m', 3.194),
    ('u', 2.364), ('d', 2.296), ('c', 2.163), ('b', 1.739), ('f', 1.625),
    ('6', 0.666), ('j', 0.610), ('y', 0.554), ('x', 0.487), ('w', 0.477),
    ('k', 0.476), ('v', 0.473), ('3', 0.336), ('1', 0.335), ('2', 0.326),
    ('4', 0.310), ('5', 0.305), ('9', 0.302), ('8', 0.300), ('7', 0.299),
    ('q', 0.298), ('0', 0.250), ('z', 0.223), ('-', 0.118), ('C', 0.095),
    ('T', 0.087), ('F', 0.085), ('B', 0.077), ('S', 0.076), ('P', 0.076),
    ('L', 0.059), ('A', 0.058), ('N', 0.051), ('D', 0.049), ('M', 0.046),
    ('E', 0.039), ('I', 0.035), ('R', 0.035), ('G', 0.028), ('U', 0.026),
    ('W', 0.025), ('O', 0.017), ('V', 0.015), ('H', 0.013), ('Q', 0.011),
    ('J', 0.007), ('K', 0.005), ('+', 0.004), ('X', 0.003), ('Y', 0.001),
    )

for c, _ in probtable:
    validchars.remove(c)
validchars = list(validchars)

def pickfrom(rng, table):
    c = 0
    r = rng.random() * sum(i[1] for i in table)
    for i, p in table:
        c += p
        if c >= r:
            return i

reservedcombos = casecombinations(winreserved)

# The first component of a name following a slash.

firsttable = (
    (lambda rng: pickfrom(rng, probtable), 90),
    (lambda rng: rng.choice(validchars), 5),
    (lambda rng: rng.choice(reservedcombos), 5),
    )

# Components of a name following the first.

resttable = firsttable[:-1]

# Special suffixes.

internalsuffixcombos = casecombinations('.hg .i .d'.split())

# The last component of a path, before a slash or at the end of a name.

lasttable = resttable + (
    (lambda rng: '', 95),
    (lambda rng: rng.choice(internalsuffixcombos), 5),
    )

def makepart(rng, k):
    '''Construct a part of a pathname, without slashes.'''

    p = pickfrom(rng, firsttable)(rng)
    l = len(p)
    ps = [p]
    maxl = rng.randint(1, k)
    while l < maxl:
        p = pickfrom(rng, resttable)(rng)
        l += len(p)
        ps.append(p)
    ps.append(pickfrom(rng, lasttable)(rng))
    return ''.join(ps)

def makepath(rng, j, k):
    '''Construct a complete pathname.'''

    return ('data/' + '/'.join(makepart(rng, k) for _ in xrange(j)) +
            rng.choice(['.d', '.i']))

def genpath(rng, count):
    '''Generate random pathnames with gradually increasing lengths.'''

    mink, maxk = 1, 4096
    def steps():
        for i in xrange(count):
            yield mink + int(round(math.sqrt((maxk - mink) * float(i) / count)))
    for k in steps():
        x = rng.randint(1, k)
        y = rng.randint(1, k)
        yield makepath(rng, x, y)

def runtests(rng, seed, count):
    nerrs = 0
    for p in genpath(rng, count):
        h = store._pathencode(p)    # uses C implementation, if available
        r = store._hybridencode(p, True) # reference implementation in Python
        if h != r:
            if nerrs == 0:
                print('seed:', hex(seed)[:-1], file=sys.stderr)
            print("\np: '%s'" % p.encode("string_escape"), file=sys.stderr)
            print("h: '%s'" % h.encode("string_escape"), file=sys.stderr)
            print("r: '%s'" % r.encode("string_escape"), file=sys.stderr)
            nerrs += 1
    return nerrs

def main():
    import getopt

    # Empirically observed to take about a second to run
    count = 100
    seed = None
    opts, args = getopt.getopt(sys.argv[1:], 'c:s:',
                               ['build', 'count=', 'seed='])
    for o, a in opts:
        if o in ('-c', '--count'):
            count = int(a)
        elif o in ('-s', '--seed'):
            seed = long(a, base=0) # accepts base 10 or 16 strings
        elif o == '--build':
            buildprobtable(sys.stdout,
                           'find .hg/store/data -type f && '
                           'cat .hg/store/fncache 2>/dev/null')
            sys.exit(0)

    if seed is None:
        try:
            seed = long(binascii.hexlify(os.urandom(16)), 16)
        except AttributeError:
            seed = long(time.time() * 1000)

    rng = random.Random(seed)
    if runtests(rng, seed, count):
        sys.exit(1)

if __name__ == '__main__':
    main()