view tests/test-rebase-cache.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > mq=
  > 
  > [phases]
  > publish=False
  > 
  > [alias]
  > tglog  = log -G --template "{rev}: '{desc}' {branches}\n"
  > theads = heads --template "{rev}: '{desc}' {branches}\n"
  > EOF

  $ hg init a
  $ cd a

  $ echo a > a
  $ hg ci -Am A
  adding a

  $ hg branch branch1
  marked working directory as branch branch1
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -m 'branch1'

  $ echo b > b
  $ hg ci -Am B
  adding b

  $ hg up -q 0

  $ hg branch branch2
  marked working directory as branch branch2
  $ hg ci -m 'branch2'

  $ echo c > C
  $ hg ci -Am C
  adding C

  $ hg up -q 2

  $ hg branch -f branch2
  marked working directory as branch branch2
  $ echo d > d
  $ hg ci -Am D
  adding d
  created new head

  $ echo e > e
  $ hg ci -Am E
  adding e

  $ hg update default
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved

  $ hg branch branch3
  marked working directory as branch branch3
  $ hg ci -m 'branch3'

  $ echo f > f
  $ hg ci -Am F
  adding f

  $ cd ..


Rebase part of branch2 (5-6) onto branch3 (8):

  $ hg clone -q -u . a a1
  $ cd a1

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg branches
  branch3                        8:4666b71e8e32
  branch2                        6:5097051d331d
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'F' branch3
  6: 'E' branch2
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg rebase -s 5 -d 8
  rebasing 5:635859577d0b "D"
  rebasing 6:5097051d331d "E"
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/635859577d0b-89160bff-backup.hg (glob)

  $ hg branches
  branch3                        8:466cdfb14b62
  branch2                        4:e4fdb121d036
  branch1                        2:0a03079c47fd
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'E' branch3
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  o  8: 'E' branch3
  |
  o  7: 'D' branch3
  |
  @  6: 'F' branch3
  |
  o  5: 'branch3' branch3
  |
  | o  4: 'C' branch2
  | |
  | o  3: 'branch2' branch2
  |/
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ cd ..


Rebase head of branch3 (8) onto branch2 (6):

  $ hg clone -q -u . a a2
  $ cd a2

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg rebase -s 8 -d 6
  rebasing 8:4666b71e8e32 "F" (tip)
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/4666b71e8e32-fc1c4e96-backup.hg (glob)

  $ hg branches
  branch2                        8:6b4bdc1b5ac0
  branch3                        7:653b9feb4616
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  8: 'F' branch2
  7: 'branch3' branch3
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  @  8: 'F' branch2
  |
  | o  7: 'branch3' branch3
  | |
  o |  6: 'E' branch2
  | |
  o |  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  | | o  3: 'branch2' branch2
  | |/
  o |  2: 'B' branch1
  | |
  o |  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg verify -q

  $ cd ..


Rebase entire branch3 (7-8) onto branch2 (6):

  $ hg clone -q -u . a a3
  $ cd a3

  $ hg tglog
  @  8: 'F' branch3
  |
  o  7: 'branch3' branch3
  |
  | o  6: 'E' branch2
  | |
  | o  5: 'D' branch2
  | |
  | | o  4: 'C' branch2
  | | |
  +---o  3: 'branch2' branch2
  | |
  | o  2: 'B' branch1
  | |
  | o  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg rebase -s 7 -d 6
  rebasing 7:653b9feb4616 "branch3"
  note: rebase of 7:653b9feb4616 created no changes to commit
  rebasing 8:4666b71e8e32 "F" (tip)
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/653b9feb4616-3c88de16-backup.hg (glob)

  $ hg branches
  branch2                        7:6b4bdc1b5ac0
  branch1                        2:0a03079c47fd (inactive)
  default                        0:1994f17a630e (inactive)

  $ hg theads
  7: 'F' branch2
  4: 'C' branch2
  2: 'B' branch1
  0: 'A' 

  $ hg tglog
  @  7: 'F' branch2
  |
  o  6: 'E' branch2
  |
  o  5: 'D' branch2
  |
  | o  4: 'C' branch2
  | |
  | o  3: 'branch2' branch2
  | |
  o |  2: 'B' branch1
  | |
  o |  1: 'branch1' branch1
  |/
  o  0: 'A'
  
  $ hg verify -q

Stripping multiple branches in one go bypasses the fast-case code to
update the branch cache.

  $ hg strip 2
  0 files updated, 0 files merged, 4 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/0a03079c47fd-11b7c407-backup.hg (glob)

  $ hg tglog
  o  3: 'C' branch2
  |
  o  2: 'branch2' branch2
  |
  | @  1: 'branch1' branch1
  |/
  o  0: 'A'
  

  $ hg branches
  branch2                        3:e4fdb121d036
  branch1                        1:63379ac49655
  default                        0:1994f17a630e (inactive)

  $ hg theads
  3: 'C' branch2
  1: 'branch1' branch1
  0: 'A' 

Fast path branchcache code should not be invoked if branches stripped is not
the same as branches remaining.

  $ hg init b
  $ cd b

  $ hg branch branch1
  marked working directory as branch branch1
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -m 'branch1'

  $ hg branch branch2
  marked working directory as branch branch2
  $ hg ci -m 'branch2'

  $ hg branch -f branch1
  marked working directory as branch branch1

  $ echo a > A
  $ hg ci -Am A
  adding A
  created new head

  $ hg tglog
  @  2: 'A' branch1
  |
  o  1: 'branch2' branch2
  |
  o  0: 'branch1' branch1
  

  $ hg theads
  2: 'A' branch1
  1: 'branch2' branch2

  $ hg strip 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/b/.hg/strip-backup/a5b4b27ed7b4-a3b6984e-backup.hg (glob)

  $ hg theads
  1: 'branch2' branch2
  0: 'branch1' branch1


Make sure requesting to strip a revision already stripped does not confuse things.
Try both orders.

  $ cd ..

  $ hg init c
  $ cd c

  $ echo a > a
  $ hg ci -Am A
  adding a
  $ echo b > b
  $ hg ci -Am B
  adding b
  $ echo c > c
  $ hg ci -Am C
  adding c
  $ echo d > d
  $ hg ci -Am D
  adding d
  $ echo e > e
  $ hg ci -Am E
  adding e

  $ hg tglog
  @  4: 'E'
  |
  o  3: 'D'
  |
  o  2: 'C'
  |
  o  1: 'B'
  |
  o  0: 'A'
  

  $ hg strip 3 4
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/67a385d4e6f2-b9243789-backup.hg (glob)

  $ hg theads
  2: 'C' 

  $ hg strip 2 1
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/a3/c/.hg/strip-backup/6c81ed0049f8-a687065f-backup.hg (glob)

  $ hg theads
  0: 'A' 

Make sure rebase does not break for phase/filter related reason
----------------------------------------------------------------
(issue3858)

  $ cd ..

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > logtemplate={rev} {desc} {phase}\n
  > EOF


  $ hg init c4
  $ cd c4

  $ echo a > a
  $ hg ci -Am A
  adding a
  $ echo b > b
  $ hg ci -Am B
  adding b
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo c > c
  $ hg ci -Am C
  adding c
  created new head
  $ hg up 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m d
  $ hg up 2
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo e > e
  $ hg ci -Am E
  adding e
  created new head
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m F
  $ hg up 3
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo g > g
  $ hg ci -Am G
  adding g
  created new head
  $ echo h > h
  $ hg ci -Am H
  adding h
  $ hg up 5
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo i > i
  $ hg ci -Am I
  adding i

Turn most changeset public

  $ hg ph -p 7

  $ hg heads
  8 I draft
  7 H public
  $ hg log -G
  @  8 I draft
  |
  | o  7 H public
  | |
  | o  6 G public
  | |
  o |  5 F draft
  |\|
  o |  4 E draft
  | |
  | o  3 d public
  |/|
  o |  2 C public
  | |
  | o  1 B public
  |/
  o  0 A public
  

  $ cat > $TESTTMP/checkeditform.sh <<EOF
  > env | grep HGEDITFORM
  > true
  > EOF
  $ HGEDITOR="sh $TESTTMP/checkeditform.sh" hg rebase --dest 7 --source 5 -e
  rebasing 5:361a99976cc9 "F"
  HGEDITFORM=rebase.merge
  rebasing 8:326cfedc031c "I" (tip)
  HGEDITFORM=rebase.normal
  saved backup bundle to $TESTTMP/a3/c4/.hg/strip-backup/361a99976cc9-35e980d0-backup.hg (glob)