view tests/test-rebase-parameters.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs There are a number of improvements we want to make to revlogs that will require a new version - version 2. It is unclear what the full set of improvements will be or when we'll be done with them. What I do know is that the process will likely take longer than a single release, will require input from various stakeholders to evaluate changes, and will have many contentious debates and bikeshedding. It is unrealistic to develop revlog version 2 up front: there are just too many uncertainties that we won't know until things are implemented and experiments are run. Some changes will also be invasive and prone to bit rot, so sitting on dozens of patches is not practical. This commit introduces skeleton support for version 2 revlogs in a way that is flexible and not bound by backwards compatibility concerns. An experimental repo requirement for denoting revlog v2 has been added. The requirement string has a sub-version component to it. This will allow us to declare multiple requirements in the course of developing revlog v2. Whenever we change the in-development revlog v2 format, we can tweak the string, creating a new requirement and locking out old clients. This will allow us to make as many backwards incompatible changes and experiments to revlog v2 as we want. In other words, we can land code and make meaningful progress towards revlog v2 while still maintaining extreme format flexibility up until the point we freeze the format and remove the experimental labels. To enable the new repo requirement, you must supply an experimental and undocumented config option. But not just any boolean flag will do: you need to explicitly use a value that no sane person should ever type. This is an additional guard against enabling revlog v2 on an installation it shouldn't be enabled on. The specific scenario I'm trying to prevent is say a user with a 4.4 client with a frozen format enabling the option but then downgrading to 4.3 and accidentally creating repos with an outdated and unsupported repo format. Requiring a "challenge" string should prevent this. Because the format is not yet finalized and I don't want to take any chances, revlog v2's version is currently 0xDEAD. I figure squatting on a value we're likely never to use as an actual revlog version to mean "internal testing only" is acceptable. And "dead" is easily recognized as something meaningful. There is a bunch of cleanup that is needed before work on revlog v2 begins in earnest. I plan on doing that work once this patch is accepted and we're comfortable with the idea of starting down this path.
author Gregory Szorc <gregory.szorc@gmail.com>
date Fri, 19 May 2017 20:29:11 -0700
parents e8d1460e2a72
children 3b7cb3d17137
line wrap: on
line source

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > 
  > [phases]
  > publish=False
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a
  $ hg unbundle "$TESTDIR/bundles/rebase.hg"
  adding changesets
  adding manifests
  adding file changes
  added 8 changesets with 7 changes to 7 files (+2 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo I > I
  $ hg ci -AmI
  adding I

  $ hg tglog
  @  8: 'I'
  |
  o  7: 'H'
  |
  | o  6: 'G'
  |/|
  o |  5: 'F'
  | |
  | o  4: 'E'
  |/
  | o  3: 'D'
  | |
  | o  2: 'C'
  | |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..

Version with only two heads (to allow default destination to work)

  $ hg clone -q -u . a a2heads -r 3 -r 8

These fail:

  $ hg clone -q -u . a a0
  $ cd a0

  $ hg rebase -s 8 -d 7
  nothing to rebase
  [1]

  $ hg rebase --continue --abort
  abort: cannot use both abort and continue
  [255]

  $ hg rebase --continue --collapse
  abort: cannot use collapse with continue or abort
  [255]

  $ hg rebase --continue --dest 4
  abort: abort and continue do not allow specifying revisions
  [255]

  $ hg rebase --base 5 --source 4
  abort: cannot specify both a source and a base
  [255]

  $ hg rebase --rev 5 --source 4
  abort: cannot specify both a revision and a source
  [255]
  $ hg rebase --base 5 --rev 4
  abort: cannot specify both a revision and a base
  [255]

  $ hg rebase --base 6
  abort: branch 'default' has 3 heads - please rebase to an explicit rev
  (run 'hg heads .' to see heads)
  [255]

  $ hg rebase --rev '1 & !1' --dest 8
  empty "rev" revision set - nothing to rebase
  [1]

  $ hg rebase --source '1 & !1' --dest 8
  empty "source" revision set - nothing to rebase
  [1]

  $ hg rebase --base '1 & !1' --dest 8
  empty "base" revision set - can't compute rebase set
  [1]

  $ hg rebase --dest 8
  nothing to rebase - working directory parent is also destination
  [1]

  $ hg rebase -b . --dest 8
  nothing to rebase - e7ec4e813ba6 is both "base" and destination
  [1]

  $ hg up -q 7

  $ hg rebase --dest 8 --traceback
  nothing to rebase - working directory parent is already an ancestor of destination e7ec4e813ba6
  [1]

  $ hg rebase --dest 8 -b.
  nothing to rebase - "base" 02de42196ebe is already an ancestor of destination e7ec4e813ba6
  [1]

  $ hg rebase --dest '1 & !1'
  abort: empty revision set
  [255]

These work:

Rebase with no arguments (from 3 onto 8):

  $ cd ..
  $ hg clone -q -u . a2heads a1
  $ cd a1
  $ hg up -q -C 3

  $ hg rebase
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a1/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  @  6: 'D'
  |
  o  5: 'C'
  |
  o  4: 'B'
  |
  o  3: 'I'
  |
  o  2: 'H'
  |
  o  1: 'F'
  |
  o  0: 'A'
  
Try to rollback after a rebase (fail):

  $ hg rollback
  no rollback information available
  [1]

  $ cd ..

Rebase with base == '.' => same as no arguments (from 3 onto 8):

  $ hg clone -q -u 3 a2heads a2
  $ cd a2

  $ hg rebase --base .
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a2/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  @  6: 'D'
  |
  o  5: 'C'
  |
  o  4: 'B'
  |
  o  3: 'I'
  |
  o  2: 'H'
  |
  o  1: 'F'
  |
  o  0: 'A'
  
  $ cd ..


Rebase with dest == branch(.) => same as no arguments (from 3 onto 8):

  $ hg clone -q -u 3 a a3
  $ cd a3

  $ hg rebase --dest 'branch(.)'
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a3/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  @  8: 'D'
  |
  o  7: 'C'
  |
  o  6: 'B'
  |
  o  5: 'I'
  |
  o  4: 'H'
  |
  | o  3: 'G'
  |/|
  o |  2: 'F'
  | |
  | o  1: 'E'
  |/
  o  0: 'A'
  
  $ cd ..


Specify only source (from 2 onto 8):

  $ hg clone -q -u . a2heads a4
  $ cd a4

  $ hg rebase --source 'desc("C")'
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a4/.hg/strip-backup/5fddd98957c8-f9244fa1-backup.hg (glob)

  $ hg tglog
  o  6: 'D'
  |
  o  5: 'C'
  |
  @  4: 'I'
  |
  o  3: 'H'
  |
  o  2: 'F'
  |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Specify only dest (from 3 onto 6):

  $ hg clone -q -u 3 a a5
  $ cd a5

  $ hg rebase --dest 6
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a5/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  @  8: 'D'
  |
  o  7: 'C'
  |
  o  6: 'B'
  |
  | o  5: 'I'
  | |
  | o  4: 'H'
  | |
  o |  3: 'G'
  |\|
  | o  2: 'F'
  | |
  o |  1: 'E'
  |/
  o  0: 'A'
  
  $ cd ..


Specify only base (from 1 onto 8):

  $ hg clone -q -u . a2heads a6
  $ cd a6

  $ hg rebase --base 'desc("D")'
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a6/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  o  6: 'D'
  |
  o  5: 'C'
  |
  o  4: 'B'
  |
  @  3: 'I'
  |
  o  2: 'H'
  |
  o  1: 'F'
  |
  o  0: 'A'
  
  $ cd ..


Specify source and dest (from 2 onto 7):

  $ hg clone -q -u . a a7
  $ cd a7

  $ hg rebase --source 2 --dest 7
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a7/.hg/strip-backup/5fddd98957c8-f9244fa1-backup.hg (glob)

  $ hg tglog
  o  8: 'D'
  |
  o  7: 'C'
  |
  | @  6: 'I'
  |/
  o  5: 'H'
  |
  | o  4: 'G'
  |/|
  o |  3: 'F'
  | |
  | o  2: 'E'
  |/
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..


Specify base and dest (from 1 onto 7):

  $ hg clone -q -u . a a8
  $ cd a8

  $ hg rebase --base 3 --dest 7
  rebasing 1:42ccdea3bb16 "B"
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a8/.hg/strip-backup/42ccdea3bb16-3cb021d3-backup.hg (glob)

  $ hg tglog
  o  8: 'D'
  |
  o  7: 'C'
  |
  o  6: 'B'
  |
  | @  5: 'I'
  |/
  o  4: 'H'
  |
  | o  3: 'G'
  |/|
  o |  2: 'F'
  | |
  | o  1: 'E'
  |/
  o  0: 'A'
  
  $ cd ..


Specify only revs (from 2 onto 8)

  $ hg clone -q -u . a2heads a9
  $ cd a9

  $ hg rebase --rev 'desc("C")::'
  rebasing 2:5fddd98957c8 "C"
  rebasing 3:32af7686d403 "D"
  saved backup bundle to $TESTTMP/a9/.hg/strip-backup/5fddd98957c8-f9244fa1-backup.hg (glob)

  $ hg tglog
  o  6: 'D'
  |
  o  5: 'C'
  |
  @  4: 'I'
  |
  o  3: 'H'
  |
  o  2: 'F'
  |
  | o  1: 'B'
  |/
  o  0: 'A'
  
  $ cd ..

Rebasing both a single revision and a merge in one command

  $ hg clone -q -u . a aX
  $ cd aX
  $ hg rebase -r 3 -r 6 --dest 8
  rebasing 3:32af7686d403 "D"
  rebasing 6:eea13746799a "G"
  saved backup bundle to $TESTTMP/aX/.hg/strip-backup/eea13746799a-ad273fd6-backup.hg (glob)
  $ cd ..

Test --tool parameter:

  $ hg init b
  $ cd b

  $ echo c1 > c1
  $ hg ci -Am c1
  adding c1

  $ echo c2 > c2
  $ hg ci -Am c2
  adding c2

  $ hg up -q 0
  $ echo c2b > c2
  $ hg ci -Am c2b
  adding c2
  created new head

  $ cd ..

  $ hg clone -q -u . b b1
  $ cd b1

  $ hg rebase -s 2 -d 1 --tool internal:local
  rebasing 2:e4e3f3546619 "c2b" (tip)
  note: rebase of 2:e4e3f3546619 created no changes to commit
  saved backup bundle to $TESTTMP/b1/.hg/strip-backup/e4e3f3546619-b0841178-backup.hg (glob)

  $ hg cat c2
  c2

  $ cd ..


  $ hg clone -q -u . b b2
  $ cd b2

  $ hg rebase -s 2 -d 1 --tool internal:other
  rebasing 2:e4e3f3546619 "c2b" (tip)
  saved backup bundle to $TESTTMP/b2/.hg/strip-backup/e4e3f3546619-b0841178-backup.hg (glob)

  $ hg cat c2
  c2b

  $ cd ..


  $ hg clone -q -u . b b3
  $ cd b3

  $ hg rebase -s 2 -d 1 --tool internal:fail
  rebasing 2:e4e3f3546619 "c2b" (tip)
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]

  $ hg summary
  parent: 1:56daeba07f4b 
   c2
  parent: 2:e4e3f3546619 tip
   c2b
  branch: default
  commit: 1 modified, 1 unresolved (merge)
  update: (current)
  phases: 3 draft
  rebase: 0 rebased, 1 remaining (rebase --continue)

  $ hg resolve -l
  U c2

  $ hg resolve -m c2
  (no more unresolved files)
  continue: hg rebase --continue
  $ hg graft --continue
  abort: no graft in progress
  (continue: hg rebase --continue)
  [255]
  $ hg rebase -c --tool internal:fail
  rebasing 2:e4e3f3546619 "c2b" (tip)
  note: rebase of 2:e4e3f3546619 created no changes to commit
  saved backup bundle to $TESTTMP/b3/.hg/strip-backup/e4e3f3546619-b0841178-backup.hg (glob)

  $ hg rebase -i
  abort: interactive history editing is supported by the 'histedit' extension (see "hg --config extensions.histedit= help -e histedit")
  [255]

  $ hg rebase --interactive
  abort: interactive history editing is supported by the 'histedit' extension (see "hg --config extensions.histedit= help -e histedit")
  [255]

  $ cd ..

No common ancestor

  $ hg init separaterepo
  $ cd separaterepo
  $ touch a
  $ hg commit -Aqm a
  $ hg up -q null
  $ touch b
  $ hg commit -Aqm b
  $ hg rebase -d 0
  nothing to rebase from d7486e00c6f1 to 3903775176ed
  [1]
  $ cd ..