Mercurial > hg
view tests/test-rebase-pull.t @ 32697:19b9fc40cc51
revlog: skeleton support for version 2 revlogs
There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.
It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.
This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.
An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.
To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.
Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.
There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Fri, 19 May 2017 20:29:11 -0700 |
parents | 0fbb3a5c188e |
children | 1b5c61d38a52 |
line wrap: on
line source
$ cat >> $HGRCPATH <<EOF > [extensions] > rebase= > histedit= > > [alias] > tglog = log -G --template "{rev}: '{desc}' {branches}\n" > EOF $ hg init a $ cd a $ echo C1 > C1 $ hg ci -Am C1 adding C1 $ echo C2 > C2 $ hg ci -Am C2 adding C2 $ cd .. $ hg clone a b updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg clone a c updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b $ echo L1 > L1 $ hg ci -Am L1 adding L1 $ cd ../a $ echo R1 > R1 $ hg ci -Am R1 adding R1 $ cd ../b Now b has one revision to be pulled from a: $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 2:ff8d69a621f9 "L1" saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob) $ hg tglog @ 3: 'L1' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' Re-run: $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes no changes found Abort pull early if working dir is not clean: $ echo L1-mod > L1 $ hg pull --rebase abort: uncommitted changes (cannot pull with rebase: please commit or shelve your changes first) [255] $ hg update --clean --quiet Abort pull early if another operation (histedit) is in progress: $ hg histedit . -q --commands - << EOF > edit d80cc2da061e histedit: generate unfinished state > EOF Editing (d80cc2da061e), you may commit or record as needed now. (hg histedit --continue to resume) [1] $ hg pull --rebase abort: histedit in progress (use 'hg histedit --continue' or 'hg histedit --abort') [255] $ hg histedit --abort --quiet Abort pull early with pending uncommitted merge: $ cd .. $ hg clone --noupdate c d $ cd d $ hg tglog o 1: 'C2' | o 0: 'C1' $ hg update --quiet 0 $ echo M1 > M1 $ hg commit --quiet -Am M1 $ hg update --quiet 1 $ hg merge 2 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg pull --rebase abort: outstanding uncommitted merge (cannot pull with rebase: please commit or shelve your changes first) [255] $ hg update --clean --quiet Abort pull early with unclean subrepo: $ echo s = s > .hgsub $ hg add .hgsub $ hg init s $ hg commit -m "generated a subrepo" $ echo a > s/a $ hg -R s add s/a $ hg pull --rebase abort: uncommitted changes in subrepository 's' (cannot pull with rebase: please commit or shelve your changes first) [255] Invoke pull --rebase and nothing to rebase: $ cd ../c $ hg book norebase $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files nothing to rebase - updating instead 1 files updated, 0 files merged, 0 files removed, 0 files unresolved updating bookmark norebase $ hg tglog -l 1 @ 2: 'R1' | ~ pull --rebase --update should ignore --update: $ hg pull --rebase --update pulling from $TESTTMP/a (glob) searching for changes no changes found pull --rebase doesn't update if nothing has been pulled: $ hg up -q 1 $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes no changes found $ hg tglog -l 1 o 2: 'R1' | ~ $ cd .. pull --rebase works when a specific revision is pulled (issue3619) $ cd a $ hg tglog @ 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ echo R2 > R2 $ hg ci -Am R2 adding R2 $ echo R3 > R3 $ hg ci -Am R3 adding R3 $ cd ../c $ hg tglog o 2: 'R1' | @ 1: 'C2' | o 0: 'C1' $ echo L1 > L1 $ hg ci -Am L1 adding L1 created new head $ hg pull --rev tip --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files rebasing 3:ff8d69a621f9 "L1" saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob) $ hg tglog @ 5: 'L1' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase works with bundle2 turned on $ cd ../a $ echo R4 > R4 $ hg ci -Am R4 adding R4 $ hg tglog @ 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ cd ../c $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 5:518d153c0ba3 "L1" saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob) $ hg tglog @ 6: 'L1' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase only update if there is nothing to rebase $ cd ../a $ echo R5 > R5 $ hg ci -Am R5 adding R5 $ hg tglog @ 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' $ cd ../c $ echo L2 > L2 $ hg ci -Am L2 adding L2 $ hg up 'desc(L1)' 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 6:0d0727eb7ce0 "L1" rebasing 7:c1f58876e3bf "L2" saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob) $ hg tglog o 8: 'L2' | @ 7: 'L1' | o 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' pull --rebase update (no rebase) use proper update: - warn about other head. $ cd ../a $ echo R6 > R6 $ hg ci -Am R6 adding R6 $ cd ../c $ hg up 'desc(R5)' 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) nothing to rebase - updating instead 1 files updated, 0 files merged, 0 files removed, 0 files unresolved 1 other heads for branch "default" $ hg tglog @ 9: 'R6' | | o 8: 'L2' | | | o 7: 'L1' |/ o 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1' Multiple pre-existing heads on the branch ----------------------------------------- Pull bring content, but nothing on the current branch, we should not consider pre-existing heads. $ cd ../a $ hg branch unrelatedbranch marked working directory as branch unrelatedbranch (branches are permanent and global, did you want a bookmark?) $ echo B1 > B1 $ hg commit -Am B1 adding B1 $ cd ../c $ hg up 'desc(L2)' 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files nothing to rebase There is two local heads and we pull a third one. The second local head should not confuse the `hg pull rebase`. $ hg up 'desc(R6)' 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ echo M1 > M1 $ hg commit -Am M1 adding M1 $ cd ../a $ hg up 'desc(R6)' 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo R7 > R7 $ hg commit -Am R7 adding R7 $ cd ../c $ hg up 'desc(L2)' 2 files updated, 0 files merged, 2 files removed, 0 files unresolved $ hg pull --rebase pulling from $TESTTMP/a (glob) searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) rebasing 7:864e0a2d2614 "L1" rebasing 8:6dc0ea5dcf55 "L2" saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-backup.hg (glob) $ hg tglog @ 12: 'L2' | o 11: 'L1' | o 10: 'R7' | | o 9: 'M1' |/ | o 8: 'B1' unrelatedbranch |/ o 7: 'R6' | o 6: 'R5' | o 5: 'R4' | o 4: 'R3' | o 3: 'R2' | o 2: 'R1' | o 1: 'C2' | o 0: 'C1'